K obsahu stránky

Partition Set for Accessory Case

  • Suitable for all Thon accessory cases 30 x 30 cm (article numbers 168886, 168887, 168889, 168890, 168891 and 175177)
  • Set consists of 4 grid bars and 1 partition board
  • Partition board made of 9 mm multiplex
  • Spacer board is slightly tapered for easier insertion into the case
  • Grid bars made of solid plastic
  • Dimensions of the bar (length x width x thickness): 394 x 90 x 18 mm
  • Partition can be variably divided in 13.6 mm
  • 7 Mounting holes available
  • Expandable with pins and holes
  • Weight: 2 kg
  • Made in Germany

For installation in an existing accessory case, a drill and a riveting tool are required

  • Optional partition: Article number 339961 (not included)
  • K dostání od Červenec 2010
  • Číslo produktu 251847
  • Prodejní jednotka 1 ks
  • Type Divider
B-stock od 729 Kč dostupný
863 Kč
Všechny ceny vč. DPH
Na skladě
1

32 Hodnocení zákazníků

4.5 / 5

Ovládání

Zpracování

15 Recenze

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
A
Good quality Thon flightcase accessory
Anonymní 06.12.2016
Perhaps just a little pricey but the quality of this is more that OK.

Mind when you drill the holes from the inside out to put a piece of wood on the outer surface and drill downwards, so you drill into that wood.
This is to prevent that the outer protection layer of the case gets too splintered. Otherwise the pop nails might not cover the damaged wood. With a wood block is goes well.

Also plan firts were to put the nails, there might be too less otherwise.
0
0
Ohlásit hodnocení

Ohlásit hodnocení