To the page content

Headphone amplifier

  • 4x Independent stereo inputs with unsymmetrical jack sockets
  • Separate volume control for every channel
  • Easily expandable - Up to 4 devices can be operated together
  • Shielded internal double-regulated power supply with voltage selector for 115V / 60Hz or 230V / 50Hz
  • Design: 19", 1 U
  • Available since January 2010
  • Item number 234787
  • Sales Unit 1 piece(s)
  • Number of stereo channels 4
  • Output Level Adjustment Per Channel Yes
  • Amount Of Inputs 4
  • Rack format Yes
85 €
All prices incl. VAT
In stock
1

Four headphone outs, four stereo ins

The Millenium HP4 is a compact headphone amplifier featuring four independent headphone outputs and four stereo inputs, allowing each output to receive a different stereo mix. A front-panel rotary switch on each channel selects which of the four stereo inputs feeds that output – or cuts the channel entirely – effectively turning the HP4 into a compact 4×4 matrix mixer rather than a conventional headphone distribution amplifier. Each channel also provides an auxiliary output mirroring the headphone feed, allowing additional HP4 units to be linked together when more headphone outputs are required. The unit has sufficient output power to drive high-impedance studio headphones without difficulty.

For studio and stage

A headphone amplifier is an essential part of any project or home studio where musicians require individual monitor mixes during recording. The HP4 is equally effective on stage, where traditional wedge systems have increasingly found themselves replaced by in-ear monitoring solutions. Installing it close to the audio interface or mixing console keeps analogue cable runs short, helping minimise interference and unwanted noise. Each channel accepts either mono or stereo sources, with the left input doubling as a conventional mono connection when required.

Power where it matters

The Millenium HP4 delivers a clean signal with enough headroom to satisfy demanding headphone loads and high-volume monitoring requests. Higher-end headphone amplifiers may reveal greater detail, but a high level of resolution isn't critical for tracking sessions: What matters is that each individual mix is reliable and is distributed with sufficient power to every musician in the room - a role that the HP4 performs reliably and without fuss. Its performance at this price point sees it regularly installed alongside far more expensive outboard gear in professional studio racks, where it is valued for its routing flexibility rather than its sonic character.

About Millenium

Millenium is one of Thomann's in-house brands and has been an integral part of the store's range since 1995. More than 800 products – from drums and percussion through to accessories such as microphone stands, racks, and recording workstations – bear the Millenium label. These products are made by renowned companies who also manufacture products for other well-known brands. Since they are imported directly from the factory without any further distributors or sales companies, they can be sold at particularly attractive prices. Incidentally, one in every four Thomann customers has already purchased at least one Millenium product.

Headphone monitoring made practical

Distributing headphone signals to a full band, a vocal ensemble, or a brass section typically involves complex signal routing. The Millenium HP4's four stereo inputs simplify this considerably – each channel can access any of the four inputs via a single rotary switch, allowing the engineer to switch instantly between individual monitor mixes while creating and refining cue sends. As an in-ear monitoring amplifier, the HP4 works particularly well alongside a digital rack mixer, where four independent monitor mixes can be created quickly and distributed without complication. The auxiliary outputs allow additional HP4 units to be cascaded, extending the total number of headphone feeds without a fixed upper limit.

598 Customer ratings

4.2 / 5

handling

features

sound

quality

364 Reviews

A
Excellent price but have some issues...
Anonymous 20.10.2014
The feature set is perfect, just what I was looking for to convert my small gig band from wedges to wired inear monitors. It has four stereo inputs and four headphone preamps. Each of the preamps can feed the signal from any of the four stereo inputs.

This is great as it allows me as an engineer to quickly listen other members mix without repatching anything, just turning the input selector. This is essential in a live situation.

Now, about these few issues...

The left and right inputs are backwards!
This was very puzzling at first. I connected everything by the book and the panning was backwards in our phones. At first I thought it was me doing something wrong on the mixer (X32) but after troubleshooting I found out that the inputs on the HP4 are indeed backwards. What's more interesting, it's not the labeling.
The first input is labeled as a left/mono input and when nothing is connected to the other input (labeled right) it does pass the signal as mono to both headphones. But that input is really the right input.

Or let me say it this way, I'm not sure if it is the inputs or headphone outputs that are reveresed, but if I connect the inputs backwards I get correct panning in the headphones.

It's no big deal in the end, not a deal breaker for sure, especially for the price. I did put a label on the back of the unit to remind me that the inputs should be connected backwards.

The other issue is that the inputs are not balanced. I have a wifi router mounted in the rack and we get some noise from it in the headphones. If I turn it off or remove it from the rack the noise disappears.
handling
features
sound
quality
7
0
Report

Report

u
ukris 19.12.2020
We use it in our home studio for creating multiple monitor routes when tracking, working on music and live streaming.

Easy to set up and does what it has to do. If you ever plugged power supply cables and jacks into a thing this should be pretty self-explanatory.

No issues encountered with it at all.

Only con: the on/off switch is on the back. Bear in mind when planning the layout of your setup.
handling
features
sound
quality
2
0
Report

Report

TL
PERFECT HEADPHONE AMP... HOWEVER!
The L.C.A Studio, UK 18.06.2013
I was looking for a simple 4 way headphone amp, so this was perfect. Nothing fancy or unnecessarily complicated like the samson and behringer stuff, just a 'source select' and 'volume' control.

It works great - HOWEVER, one day a strong smell came from the Headphone amp... which I believed to be the smell of a capacitor blowing... and it stopped working.

To this day I am unsure of why or how this had happened (Thomann said they would investigate and tell me the problem, but never did) although they did send me a brand new replacement immediately, and they covered all the P+P costs.

The new unit is working great, and I am very pleased. I LOVE THOMANN!
handling
features
sound
quality
10
0
Report

Report

NC
Its great and functional
Nano Casale 27.03.2022
This unit is quite noisy but got a lot of functions, easy to use. Quality looks nice but it is not.
Couldn´t expect more for this amount of money but I´m happy with it.
handling
features
sound
quality
2
0
Report

Report