Voodoo Lab Voltage Doubling Cable PPY

173

Voltage Doubler Cable

  • Pedals with higher voltage requirements can use this voltage doubler cable to combine two isolated power supply multi-outputs and thus provide 18 V or 24 V
  • Suitable for various MXR Dunlop Fulltone and Keeley pedals
  • Power supply: 2 x 2.1 mm coaxial
  • Pedal connector: 2.1mm coaxial
  • Polarity: Standard (center minus)
  • Length: 46 cm
K dostání od Duben 2008
Číslo produktu 207270
Prodejní jednotka 1 ks
277 Kč
Cena vč. DPH nezahrnuje poštovné 295 Kč
Na skladě
Na skladě

Tento produkt je na skladě a může být obratem odeslán.

Informace o expedici
Dodání přibližně v rozmezí Čtvrtek, 2.05.Pátek, 3.05.
1

173 Hodnocení zákazníků

4.6 / 5

Musíte být přihlášeni, pokud chcete hodnotit produkty.

Upozornění: Abychom zabránili tomu, že se budou hodnocení zakládat informacích z doslechu, polovičních pravdách nebo skryté reklamě, dovolujeme na našich stránkách hodnotit pouze skutečným uživatelům, kteří u nás vybavení také koupili.

Po přihlášení najdete také v zákaznickém centru v sekci "Hodnotit produkty" všechny produkty, které můžete hodnotit.

Zpracování

73 Recenze

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
A
A useful tool
Anonymní 30.01.2015
I purchased this product to allow a Decibel 11 Hot Stone Deluxe to power a Pigtronix Echolution 2 delay pedal.

The pedal required 18v whereas the power supply was only able to provide 9v.
Despite being made by Voodoo Lab this adapter will work with any power supply which uses the standard Boss style connectors.

It has worked flawlessly in operation and appears to be made to a high standard. I have had no issues with noise etc.

Though it is advertised for use with pedals such as the OCD I would recommend it more for pedals like the Echolution 2 which require both 18v and a significant amount of current.

There are adapters from other manufacturers which will only take up a single output from your power supply and can output 18v however these are typically limited to 30mA and so can only be used with low current pedals.

This cable can also be used to provide 24v by combining two 12v outputs although it won't provide the reverse polarity that some pedals of this voltage require.
Zpracování
1
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
S
Does what it needs to do
SJS 14.02.2021
I bought this cable as to be able to supply 18v to my Fulltone Supa-Trem2 V2 which can function at this voltage in order to provide more headroom. It works flawlessly.

Pros: High quality as usual in Voodoo Labs products
Cons; None
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
d
Recommended
din65 23.03.2022
Good quality and gets the job done!
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
G
Double your power!
Guitarpower 14.02.2014
I always loved the sound of my Fulltone OCD in front of my Marshall JMP 100 MK2 - but then I asked myself: How good could this combination sound, using the 18-Volt mode of the OCD ...?!
So, I started looking around for a suitable power cable (and power supply) for the OCD! I soon found out that the Voodoo Lab Y - 18 volt cable seems to be the best buy - and what can I say: yes it is!
The 'new' sound of my Fulltone OCD (thanks to the Voodoo Lab cable: now with 'double power' ;-)) is really great!! It is more straight ahead now than it was before!
If you are looking for a good and reasonably priced 18 Volt Cable, dont look any further!
Keep rockin'!!
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení