Palmer PDI-06-8 Ohm

54

Load Box

  • Adjustable in 6 steps (100%, 70%, 50%, 35%, 25%, 18%)
  • Reduces the volume of a guitar speaker at full saturation of the tubes
  • Made for 8 Ohm or 2x 16 Ohm loudspeakers
  • Bypass/ attenuator switch for fast switching between full and reduced output power
  • Input: 1x 6.3 mm jack socket
  • Output for loudspeaker 2x 6.3 mm jack socket in parallel
  • Output impedance: 8 Ohm
K dostání od Srpen 2011
Číslo produktu 268044
Prodejní jednotka 1 ks
B-stock od 6 099 Kč dostupný
6 599 Kč
Všechny ceny vč. DPH
Na skladě
Na skladě

Tento produkt je na skladě a může být obratem odeslán.

Informace o expedici
Dodávku bez poštovného můžete očekávat pravděpodobně mezi Čtvrtek, 2.05. a Pátek, 3.05.
1

54 Hodnocení zákazníků

4.4 / 5

Musíte být přihlášeni, pokud chcete hodnotit produkty.

Upozornění: Abychom zabránili tomu, že se budou hodnocení zakládat informacích z doslechu, polovičních pravdách nebo skryté reklamě, dovolujeme na našich stránkách hodnotit pouze skutečným uživatelům, kteří u nás vybavení také koupili.

Po přihlášení najdete také v zákaznickém centru v sekci "Hodnotit produkty" všechny produkty, které můžete hodnotit.

Vlastnosti

Zvuk

Zpracování

32 Recenze

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
C
Really good quality
Csubee 28.09.2020
I use it at home with my Peavey 6505 120W + Engl 4x12 Pro.
I needed this, becasue sometime i have to lower the volume on my rig.

My expactations were not really high, becasue You can read everywhere how attenuators affect the sound of your amp, and how bad they are. I can say i was really suprised.

Compared to the natural sound of my amp i can barely tell the difference (Except the volume ofcourse).
I usually use it on 50% or 75% to attenuate the volume for normal room use, but using on 18% give me a surrealistic feel, becasue i never had a chance to play my amp monster late night. Now its not a problem anymore. At 18% the sound gets a little bit muddy (But still enjoyable) but im sure about its becasue the signal at this level is too low for my 4x12.
The construction is perfect for me. Simple, strong and straightforward. I expected it to heat up after a while, but i never noticed it.
The bypass function also working fine and it makes easy to switch between the amp original and the attenuated volume.

So, I can only recommend it if you need to lower the volume on your rig.
Vlastnosti
Zvuk
Zpracování
1
1
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
A
Best attenuator on the market!
Anonymní 07.06.2015
Small, simple to use and decent volume differences.

It's fantastic for live shows, I usually set it on 50% with my Mesa Boogie dual Rectifier. It keeps the levels between the different amp channels EXACTLY the same. I've found that some others change the levels for solo boost and clean a fair bit.

Great tone at low volumes!!

It's made by Palmer, so it's a bit pricey, but you get what you pay for!!
Vlastnosti
Zvuk
Zpracování
2
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
J
Solid design
Joffen 28.08.2020
It does what it's supposed to do, and appears to be built like a tank.
Vlastnosti
Zvuk
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
s
does the job!
sallikaan 11.10.2018
great attenuator for my beast tube amp. german tech, german tank ;)
Vlastnosti
Zvuk
Zpracování
1
1
Ohlásit hodnocení

Ohlásit hodnocení