Harley Benton StompControl-4 ISO

92

4-Way Loop Switcher

  • Programmable loop switcher with built-in power supply
  • 4 Patches
  • 5 Banks
  • 20 Presets
  • Easy to read LED display
  • Tuner output
  • On/Off switch with status LED display
  • Easy to use
  • Built-in, completely insulated power supply - Input: 12 V / 2 A - Outputs: 2 x 9 V 100 mA, 2 x 9 V 300 mA, 1 x 9 V 500 mA (the total output load must not exceed 1300mA / 1.3A!)
  • Overload & short circuit protection
  • Dimensions (H x W x D): 335 x 75 x 45 mm
  • Weight 690 g
  • Incl. 12 V 2A adapter and 60 cm DC cable
K dostání od Únor 2019
Číslo produktu 451027
Prodejní jednotka 1 ks
Type Looper/Switcher
LED Display Yes
PSU Connector Yes
Shape Floor Effects Pedal
MIDI Interface No
2 259 Kč
Cena vč. DPH nezahrnuje poštovné 295 Kč
Na skladě
Na skladě

Tento produkt je na skladě a může být obratem odeslán.

Informace o expedici
Odešleme pravděpodobně do Čtvrtek, 2.05.
1

92 Hodnocení zákazníků

4.5 / 5

Musíte být přihlášeni, pokud chcete hodnotit produkty.

Upozornění: Abychom zabránili tomu, že se budou hodnocení zakládat informacích z doslechu, polovičních pravdách nebo skryté reklamě, dovolujeme na našich stránkách hodnotit pouze skutečným uživatelům, kteří u nás vybavení také koupili.

Po přihlášení najdete také v zákaznickém centru v sekci "Hodnotit produkty" všechny produkty, které můžete hodnotit.

Vlastnosti

Zpracování

67 Recenze

j
Programovatelná lišta
jakattara 01.02.2023
Poměr kvality a ceny. Jednoduché programování, bytelná konstrukce...
Vlastnosti
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
N
Just one negative
NatrelAcoustix 24.05.2020
I think evryone else has covered the main good points of this little loop switcher. And, it is good. Obviously it would be nice to have more power outs and an extra loop, but my 'negative' issue is this: Whilst using the unit at home I never really noticed this issue, but live... It caught me out. Twice! When the unit is in tuner mode and silent, it de-selects your existing loop. When you come out of tuner mode your all of a sudden in by-pass, but it isn't true by-pass. you then have to step on the switch of the loop you want... that then puts that loop into by-pass... Then you have to step on the switch again to select it! Pain in the bum!
If you know this is going to happen however, you can re-select your loop whist in tuner mode. Then, when you exit the tuner you're ready to play in your chosen loop. I hope I've explained this well and I don't know if it's only my unit that does this. Maybe reviewer's in other languages have mentioned it? Once you know it has this odd quirk it's not a massive problem, but it was embarresing live when you start a heavily guitar affected tone (meant to be delay, chorus, overdrive) squeeky clean. It turned a few heads in the venue. We laughed later... Much later.
Vlastnosti
Zpracování
30
2
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
Ib
For the tap-dance aficionado
Impulsive buyer 28.03.2022
This is a perfect, reasonably priced, entry-level switcher that does the basics like a champ. Can't really attest to the build quality as I have been using it only for a couple of months on rehearsals, but it can handle my 100kg 47 size foot stomp quite well. It's really easy to set up and even change if needed on the fly. DOn't expect it to be a spaceship, it's just a good switcher that will cover all your basic needs.
Vlastnosti
Zpracování
4
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
LB
Sturdy and reliable
Le Bodo 24.01.2024
Has worked flawlessly for more than a year now. Super easy to set up and even modify on the fly. Great value for a basic way to switch between different loops. I use it with a kind of 4-cable method to send several preamps into my main amp's effects loop, with the preamp of that amp also being a loop. This way I can switch between various preamps (KSR Ceres, AMT, etc) all being sent to the same Marshall Silver Jubilee power section.
I wish there was an option to add a channel switch for an amp but I can't fault this unit as it is a cheaper, simpler version of the other one that has more loops and channel switching.
Being able to use it to power the pedals is also a big plus.
The only slight negative is that the footswitches are a bit loud and stiff. But otherwise, a great product with great value.
Vlastnosti
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení