A
Yojo Live
Well it is a entry into world of switched loop happiness.
You get a lot for the price.
You will need to sit bit longer and think how do you want to use it specially if you have more than 8 pedals on your pedal board.
Some pedals can just go in front of it and some can be in same loop but than your layout of the pedal board has to be good so you can access those as well.
Please note that you will need isolated PSU or two PSU to get rid of possible ground loops.
One PSU for Looper and digital devices and other for your analog pedals. Du not know is your pedal analog or digital? Well if it draws 5 to 90 mA it is 99% sure analog pedal. If it is 100 to 500 mA it is digital with some strange birds here and there.
When you separate your pedals in loops expect them to sound differently than what you have been used to if you have had them in daisy chain. In most of the cases your OD pedals will sound like you have more gain.
In mix of buffered and true bypass pedals lot of things can happen and order of pedals is crucial.
When you have them separated with a looper pedals do not influence each other unless both are activated but than that is completely different scenario.
Do not expect Gigrig G2 for this price. On other hand this unit will not kill sound of your Boutique pedal. So if it can cover your scenario this is excellent looper.
Remember that if you have like two Strymon pedals 300-500 mA and this and only for those 3 devices you will need min 2A PSU. Yes 1,5A is needed but you do not want to run 1,5 A PSU with a load of 1,5A. It iwll not last long and it will create issues.
So be clever with it and isolate pedals and power feeds and you can make very nice setup with this looper.
Worth every penny.
You get a lot for the price.
You will need to sit bit longer and think how do you want to use it specially if you have more than 8 pedals on your pedal board.
Some pedals can just go in front of it and some can be in same loop but than your layout of the pedal board has to be good so you can access those as well.
Please note that you will need isolated PSU or two PSU to get rid of possible ground loops.
One PSU for Looper and digital devices and other for your analog pedals. Du not know is your pedal analog or digital? Well if it draws 5 to 90 mA it is 99% sure analog pedal. If it is 100 to 500 mA it is digital with some strange birds here and there.
When you separate your pedals in loops expect them to sound differently than what you have been used to if you have had them in daisy chain. In most of the cases your OD pedals will sound like you have more gain.
In mix of buffered and true bypass pedals lot of things can happen and order of pedals is crucial.
When you have them separated with a looper pedals do not influence each other unless both are activated but than that is completely different scenario.
Do not expect Gigrig G2 for this price. On other hand this unit will not kill sound of your Boutique pedal. So if it can cover your scenario this is excellent looper.
Remember that if you have like two Strymon pedals 300-500 mA and this and only for those 3 devices you will need min 2A PSU. Yes 1,5A is needed but you do not want to run 1,5 A PSU with a load of 1,5A. It iwll not last long and it will create issues.
So be clever with it and isolate pedals and power feeds and you can make very nice setup with this looper.
Worth every penny.
8
0
Evaluatie melden
GN
robuust en doet zijn werk
een mooie budget variant om een switch eens goed uit te proberen. het apparaat doet wat hij moet doen. Je kunt er verschillende loops op in stellen en ik kan er zelfs de kanalen van mijn versterker op instellen.
Positief is dat ik gemakkelijk alle loops zo kan instellen dat ik precies krijg wat ik wil met 1 druk op de knop. Het enige nadeel wat ik heb kunnen ontdekken is dat er een kleine vertraging zit tussen het switchen. Voor mij is dit geen probleem maar houdt hier rekening mee.
Positief is dat ik gemakkelijk alle loops zo kan instellen dat ik precies krijg wat ik wil met 1 druk op de knop. Het enige nadeel wat ik heb kunnen ontdekken is dat er een kleine vertraging zit tussen het switchen. Voor mij is dit geen probleem maar houdt hier rekening mee.
2
0
Evaluatie melden
