Schaller S-Locks M NI

275

Security Locks

  • Set consists of belt pin, lock and lock wheel (one pair each)
  • Silent function for noiseless operation
  • One-piece belt button made of hardened steel with self-tapping wood thread incl. felt disks for the protection of the instrument paint
  • Extended thread also holds very thick guitar straps up to 6 mm
  • Bolts made of stainless steel for minimum wear and thus highest safety
  • New design of the ball for best feel
  • Lock-wheel with special patent thread and locking screw prevents the locks on the belt loosen
  • Fully compatible with all existing Schaller Security Locks (without Silent Feature)
  • Size: M
  • Surface: Nickel
K dostání od Květen 2018
Číslo produktu 438347
Prodejní jednotka 1 ks
Type Security Locks
529 Kč
Cena vč. DPH nezahrnuje poštovné 295 Kč
Na skladě
Na skladě

Tento produkt je na skladě a může být obratem odeslán.

Informace o expedici
Odešleme pravděpodobně do Pátek, 3.05.
1

275 Hodnocení zákazníků

4.7 / 5

Musíte být přihlášeni, pokud chcete hodnotit produkty.

Upozornění: Abychom zabránili tomu, že se budou hodnocení zakládat informacích z doslechu, polovičních pravdách nebo skryté reklamě, dovolujeme na našich stránkách hodnotit pouze skutečným uživatelům, kteří u nás vybavení také koupili.

Po přihlášení najdete také v zákaznickém centru v sekci "Hodnotit produkty" všechny produkty, které můžete hodnotit.

Zpracování

170 Recenze

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
A
Good quality
Andrew822 13.11.2020
German quality and worth the price even if that seems a bit high compared the copies out there. They have made the screw one piece with the button as opposed to 2 pieces, plus you will need an hex/allen key to screw them in. Also be aware that the screw thickness is a bit bigger than the previous models so you may need to widen the hole on your guitar/bass a bit first a little to avoid finish cracking. The latch that goes on your strap are a big improvement over the older version with a tiny set screw to hold the second piece in place, the old ones would come loose after a while but these will remain there until you want to remove them. They come in a fancy box which I am sure is not needed and they could do with supplying the allen key. Buy with confidence a very good product for sure.
Zpracování
1
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
t
Be slightly careful of these
tfeb 26.09.2018
On the whole these are better than the old Schaller strap locks: the attachment to the strap is much easier to do and there is a grub screw which means that once you've got everything right and tightened it up on the strap then it will stay that way (you need a fairly fine flatbladed screwdriver for this, but you don't need to do it up).

But there is a critical design problem. The strap buttons themselves are now integral with the screws that go into the guitar (this was not the case for the older locks), and these screws may be larger than the existing ones. If that's the case for your guitar then screwing the buttons into the guitar will widen the holes in the guitar and mean you can never put the old buttons back. Worse, it could possibly split the wood of the guitar which would be very bad (it did not for me).

So I would look for an older set of buttons if possible.
Zpracování
3
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
K
Fits perfectly on a Gibson Les Paul
Kerri 01.06.2020
I searched if this would fit a Gibson nicely or if it would require for the original strap hole to be widen and couldn't find much information. The screws on my Gibson were nearly 4mm wide and the Schaller locks that come in this pack are 4mm.
I did not have to force the screws in, it was an effortless task altough I suspect that the original screws might not be as grippy as they were if I ever put them back on, for re-sale purposes.
In short, you do not have to widen your original strap holes with any kind of tool if your buying for a Gibson Les Paul as the screws are nearly identical. Do be aware that Fender and PRS stock strap screws are thinner as I have one of both and they seem more like 3,5mm rather than the Schaller 4mm.
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
hl
Install problem
houward lin 09.03.2022
I hope it can give me a small screwdriver-slotted.
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

Návrhy z YouTube