Rockboard S-Connector nickel

355

Otevřít 360°

Zobrazit překlad

Straight Pedal Connector

Length (plug to plug): 12 mm
Allows for the shortest possible connection of two pedals
For pedals with side-mounted sockets
Suitable for pedals with side panels at a 90° angle to the floor
6.3 mm Mono jack socket on both sides

30 30denní záruka vrácení peněz

K dostání od Únor 2017

Číslo produktu 404982

Prodejní jednotka 1 ks

Length 1,2 cm

Colour Silver

Connector 1 Jack 6,3mm TS male

Connector 2 Jack 6,3mm TS male

Connector from 6,3mm TS Jack

Plug out Jack 6,3mm TS male

Zobrazit víc

48 Kč

Cena vč. DPH nezahrnuje poštovné 295 Kč

Odešleme pravděpodobně do Úterý, 7.05.

173

Pořadí prodejnosti

v kategorii Patch kabely

To zakoupili zákazníci, kteří si prohlíželi tento produkt

Harley Benton FPC-10 Flat Patch Cable

73 Kč

koupili

Rockboard Z-Connector nickel

74 Kč

koupili

pro snake Patch Angled Jack 0,15 m

83 Kč

koupili

Rockboard S-Connector gold

74 Kč

355 Hodnocení zákazníků

5 236 Zákazníci 4 67 Zákazníci 3 31 Zákazníci 2 10 Zákazníci 1 11 Zákazníci

4.4 / 5

Zpracování

Zásady hodnocení

172 Recenze

Zobrazit překlad

Zobrazit původní text

Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.

Don't buy this style of connector.

benash 13.10.2018

Ive recently been building a pedal board for the function band shows I do. I own couple of Boss Pedals and have been trying to find a way to take up as little space as possible on my board. Usually this style of connector wouldn't be possible, but as I am using the same company pedals, the jack sockets line up perfectly... or so I thought.
I plugged two pedals in, and they seemed to work perfectly. So I wired everything up and took them on a gig. Cut a long story short, everytime I hit either of the pedals, there was a weird crackling sound. So after the gig the next morning I ran a few tests. Basically even though the Boss pedals appear to have the jack socket in exactly the same place, they're ever so slightly different. So whenever I pushed on one pedal, It would act as though I was pressing down on the jack socket on the other, therefore creating the noise.
Its a shame as these connectors are cheap, and small. As an alternative, I recommend "Rockboard" or 'EBS" patch leads. Thomann sell both. No noise, and equally as compact.

Ohlásit hodnocení

Zdá se Vám toto hodnocení nesprávné nebo z nějakého důvodu nepřijatelné? Napište nám prosím do následující textového pole důvod Vašeho hodnocení a - pokud možno - Vaši emailovou adresu pro případné zpětné dotazy.

Zobrazit překlad

Zobrazit původní text

Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.

kostas_v 09.07.2018

I bought this to connect some guitar pedals and for what this connetctor is, it has decent build quality and doesn't create unnecessary noise. You really should look into connectors like these before buying them, though.

In most cases these are unsuitable to connect pedals from different brands as they place the jacks at different heights. Even on pedals from the same brand, due to imperfections or slight differences in manufacturing, the jacks may be at slightly different heights, and you can't really connect more than 3-4 pedals without noticing some obvious curvature. This puts strain on the jacks and could potentially damage them, especially when you press down on them.
You don't save THAT much space either, especially if you have flat patch cables, in which case, they take up about the same space. Overall, you should probably look into getting some patch cables if you're looking to use them on a pedalboard.

Ohlásit hodnocení

Zobrazit překlad

Zobrazit původní text

Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.

Very good construction and operation

aZu 11.11.2020

Very good construction and operation, it does the job pretty well.
Its size allows you to save a lot of space on "crowded" pedal boards.
The optimal use situation is of course that between two pedals of the same brand or that have the INs and OUTs positioned at the same height on the sides.

Ohlásit hodnocení

Zobrazit překlad

Zobrazit původní text

Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.

Not the best solution to your pedal-board sorrows

Staggerin' Jon 13.11.2018

This seems like a good idea, but pedals' input jacks are not mounted perfectly straight, resulting in the pedals not sitting straight and putting stress on the circuit board. I even found this with pedals made by the same company.
Perfectly good quality, but not a quality idea; you're better off with flat connectors (made by Thomann).

Ohlásit hodnocení

Přečíst si všechny recenze

Rockboard S-Connector nickel

Straight Pedal Connector

To zakoupili zákazníci, kteří si prohlíželi tento produkt

355 Hodnocení zákazníků

Musíte být přihlášeni, pokud chcete hodnotit produkty.

172 Recenze

Smart Navigator

Naposledy zobrazené produkty

Bezpečný nákup i platba

Vaše výhody

Servis

Podávané s láskou!

Rockboard S-Connector nickel

Straight Pedal Connector

To zakoupili zákazníci, kteří si prohlíželi tento produkt

Příslušenství a vhodné doplňky

355 Hodnocení zákazníků

Musíte být přihlášeni, pokud chcete hodnotit produkty.

172 Recenze

Porovnat možnosti

Smart Navigator