Rean NYS 322

171

DIN Connector

  • 5-Pin
  • With metal sleeve
  • Maximum cable diameter: 5 mm
  • Made by Rean (registered Trademark of Neutrik AG)
Číslo produktu 121360
Prodejní jednotka 1 ks
Build In No
Plug DIN 5-pol. (MIDI) male
40 Kč
Cena vč. DPH nezahrnuje poštovné 295 Kč
Množstevní sleva
Cena za kus Ušetříte Množství
40,00 Kč 1
38,10 Kč 4,8% 20
36,30 Kč 9,3% 50
Na skladě
Na skladě

Tento produkt je na skladě a může být obratem odeslán.

Informace o expedici
Odešleme pravděpodobně do Úterý, 7.05.
1

171 Hodnocení zákazníků

4.7 / 5

Musíte být přihlášeni, pokud chcete hodnotit produkty.

Upozornění: Abychom zabránili tomu, že se budou hodnocení zakládat informacích z doslechu, polovičních pravdách nebo skryté reklamě, dovolujeme na našich stránkách hodnotit pouze skutečným uživatelům, kteří u nás vybavení také koupili.

Po přihlášení najdete také v zákaznickém centru v sekci "Hodnotit produkty" všechny produkty, které můžete hodnotit.

Zpracování

59 Recenze

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
MM
The only decent MIDI plug I could find
Mike MK 06.04.2020
I'm using these connectors for making my own MIDI cables in my quite specific studio setup.

Pros:
- excellent price to quality ratio
- sturdy with proper strain relief
- metal casing
- easy to solder
- fit well in all MIDI sockets

Cons: none

I've been using these for quite some years now. Some users might find it irrelevant but I like how these plugs slide into all MIDI sockets on all of my devices, while I hade some ready made cables that had to be plugged in and out with decent force.

While not a con, I'd like to see more variants of this connector, e.g. 90 degrees angle, etc.
Zpracování
1
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
A
High quality connector
Anonymní 12.03.2014
I use this one for an old Philcorda which has an 5 pin audio output. I also used cheaper ones but i really prefer this one. First of all the metal case is really stable and solid. Then the cable relief and rubber break protection is also very solid. At least the connection pins inside are very easy to solder. The solder almost sticks to the pins. This is a mess with the cheap ones. Espacially becaus there are five of the pin connectors and they´re very small. So if you want a long live, easy to solder connctor invest the more bucks ans go for the neutrik! I only used it for audioconnections. Don´t know how it works for Midi.
Zpracování
2
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
A
Easy to solder
AdrianoGominho 13.02.2021
Using these to make my own midi cables. These are easy to solder and seem sufficiently robust to withstand frequent handling.

The fitting between the metal case and the plastic core is very tight. On one connector the case was slightly ovalized, not that this could be visible to the naked eye, but enough to prevent the plastic core to slide to its position. A gentle press on the metal opening with a suitable sized drill was enough to sort this out, but if I had not the proper tools I would be stuck with an unusable item.
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
P
good
Pjanoz 22.10.2018
Its very nice quality but Ive had some where the rubber protection cracked.
Zpracování
1
0
Ohlásit hodnocení

Ohlásit hodnocení