Millenium Rackstand 6U

150

Rack Stand 6 U

  • Thread for M5 screws
  • Dimensions (W x H x D): 48 x 29.5 x 35.5 cm
  • Including 12 screws
  • Colour: Black
K dostání od Září 2018
Číslo produktu 442737
Prodejní jednotka 1 ks
usable height in U 6 U
Material Steel
Wheels No
Type Tabletop Stand
Height min. 295 mm
Height max. 295 mm
Special Design No
Weight 1,8 kg
Zobrazit víc
317 Kč
Cena vč. DPH nezahrnuje poštovné 295 Kč
Na skladě
Na skladě

Tento produkt je na skladě a může být obratem odeslán.

Informace o expedici
Odešleme pravděpodobně do Sobota, 4.05.
1

150 Hodnocení zákazníků

4 / 5

Musíte být přihlášeni, pokud chcete hodnotit produkty.

Upozornění: Abychom zabránili tomu, že se budou hodnocení zakládat informacích z doslechu, polovičních pravdách nebo skryté reklamě, dovolujeme na našich stránkách hodnotit pouze skutečným uživatelům, kteří u nás vybavení také koupili.

Po přihlášení najdete také v zákaznickém centru v sekci "Hodnotit produkty" všechny produkty, které můžete hodnotit.

Stabilita

Zpracování

105 Recenze

I
Na moje dva rack moduly stačí i když na jeden virtual analog a jeden semimodular to prostê sedlo .
Inte-lect 20.08.2022
Jeden můj rack synth je vysoký modul a druhý je zase nižšíší , tudíš jsem musel vypustit horní kulatinu a ten vêčí dát nahoru na otvory výše ,
Přesto sedly do krajnich variant pro šrouby jenom přečnívá. A i do lišt sedl jelikož ty k tomu vyšímu synthu dodané mêly oválné otvory
a ten menší s otvory na jeden šroůb vlezl přesnê dolů , nemusel jsem nic vrtat a ten dole to pevnê drží pohromadê ten nahoře v oválných ani nelítá a to jsoů oba na oreginal dodaných šroůbech a ještê je mezi nimi mezera pro midi kabel zepředu . Nic nebylo třeba vrtat a zbyla mi ta kulatina . v pohodê se to dá bez ní i přenášet . a kdyby byl problém upravil bych ji tak že bych ji dal do středu mezi ty moduly ale stačilo utáhnoůt šroůby dostatečňe a hotovo
+ nej cena za pomêrnê bêžné řešení ale variabilita pro mnoho lišt
+ pevnêjší než vypadá
- šrouby bych bral delší kvuli tomu že by se lepe propracovávaly disingové zlepšováky .
Zpracování
Stabilita
0
0
Ohlásit hodnocení

Ohlásit hodnocení

P
Millenium Rackstand 6U
Pažba 13.04.2022
Slouží ve studiu jako stolní rack pro zvukové karty, bez chyby.
Zpracování
Stabilita
0
1
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
L
Feels almos like a scam
Liukke 07.02.2022
I feel very bad giving a harsh review on a Thomann owned brand but...this rack is awful.
First things first...it comes with half of needed screws, only 12, despite saying just "Includes screws" in the description.

If you check carefully one of the photos it shows the "only" 12 screws, it feels like one of those cheap scams because another package of M5 screws costs 3.90€ and of course you end up with MORE than needed.

So if you plan to put serious equipment on that rack (which requires all 4 screws per module) then either buy something else of consider the extra cost.
I thought I was in Germany where things are usually fair but looks like I ended up in a classic American scam...my bad.

Second huge problem, the quality just sucks.
Feels like they coated the paint without caring for the screw threads, which simply don't work.
My whole right side of the rack was a pain in the butt to fix, the screws simply didn't fit in, I had to manually tap the holes with a sharper and specific screw so that it fits...in the meantime I ended up with stripped screws while trying to use the freaking product as intended.

Damn, after almost a decade of doing purchases on Thomann this is the first time I feel embarrassed for them, how can they sell this :/
Zpracování
Stabilita
3
3
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
EK
Works fine, but bring your own screws
Emlyn K Helicopter 07.01.2023
Pros (with caveats):

Construction is solid - heavy duty 3.5mm steel nicely finished with rugged black powder-coating (but see * below). This thing will house a hefty unit on it's top row and not wobble.

30 degree angle great for desktop use (but see ** below).

Cons (with work-arounds):

*As noted in other reviews, the screw-holes must be tapped before use. I used one of the supplied screws to carefully go in and out of each hole - no problems after that. The supplied screws are useless - too soft and WAY too short. On my range of rack gear the thickness of the rack ears goes from 2mm to 6mm, so on even the middle-thickness units the screw only goes into the thread half-way. Thats a recipe for breaking things! Luckily for me I had a bag of spare (longer, harder) screws. For the sake of a couple more Euros they really should give you decent screws, and 24 of them!

**Note that the lowest two or three slots are restricted due to the 30 degree rack - it's not possible to mount anything longer than 12cm on the 2nd row without hitting the legs. But its fine for mounting shallower units - I've put a Behringer Model D (with rack ears) at the bottom and it fits just fine - plus spare room underneath to slide in an old RX-17 drum machine.

Also note that the thin top crossbar obscures the top-most slot. But that isn't a problem if you've already put one or two units in lower down - those plus the main bottom crossbar are all thats needed to make the rack sturdy.

Despite the cons, I'm ordering another one of these (12u this time) as its solid, the angle is just right and its SO cheap!
Zpracování
Stabilita
0
0
Ohlásit hodnocení

Ohlásit hodnocení