Hicon HI-J35T02

70 Hodnocení zákazníků

4.3 / 5

Musíte být přihlášeni, pokud chcete hodnotit produkty.

Upozornění: Abychom zabránili tomu, že se budou hodnocení zakládat informacích z doslechu, polovičních pravdách nebo skryté reklamě, dovolujeme na našich stránkách hodnotit pouze skutečným uživatelům, kteří u nás vybavení také koupili.

Po přihlášení najdete také v zákaznickém centru v sekci "Hodnotit produkty" všechny produkty, které můžete hodnotit.

Zpracování

34 Recenze

Hicon HI-J35T02
161 Kč
Cena vč. DPH nezahrnuje poštovné 295 Kč
Na skladě
Na skladě

Tento produkt je na skladě a může být obratem odeslán.

Informace o expedici
Dodání přibližně v rozmezí Středa, 29.05.Čtvrtek, 30.05.
1
google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
M
Small and fiddly, but otherwise perfect
Matt.S 20.03.2020
Great quality connector for replacing the jack on headphones that include a microphone. Keep in mind when soldering that you'll need a pretty small tip to avoid melting the plastic. Also the sleeve for the cable is pretty big, a lot of modern headphones have ridiculously thin cables. So factor that in... Otherwise, great product.
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
FF
Good quality and robust
Frank Flanagan 25.10.2021
Takes a decent size cable if you discard the rubber boot and replace it with thin heatshrink, which also probably provides better strain relief. I am using a bunch of these with 6.15 mm diameter cable.

You do need a fine soldering iron tip and ideally a decent wattage iron so the connector is only heated for a couple of seconds.
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
TS
okey...
Tom S 03.04.2018
I used this jack to repair my earbuds.

I soldered the jack to my earbuds only i forgot to put the jack end on the cable before hand. So I had to desolder it the problem with that was that the plastic started to melt and 2 solder joints connected because of that.

Pro's
It's what it says it is

con's
weak design
Very large
1 chance to get it right
expensive
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
A
Good jack, noiseless
Anonymní 26.09.2016
I bought the HICON HI-J35T02 Jack and I'm using it for my headphones in my home studio. I used a lot of 3,5 mm jacks but this one's the best in therms of sound. It's easy to attach to the cable and it doesn't have any noise. This Jack is awesome for the gold-plated connector which a perfect, noiseless sound. I didn't had any problems, it works great!
I recomand it to all the musicians looking for a perfect, noiseless and fine sound!
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
A
Great jack but hard to solder
Anonymní 25.11.2016
I bought this jack to build a detachable cable for a DIY headset mod with a Superlux HD330.
The jack works great and has a tight fight.
There is only one bad thing about it. Soldering the 4 pin 3,5mm jacks is hard, but its not the problem of this exact product.

Pro: Great build quality and tight fit in the socket
Con: Hard to solder, but you will have this problem with all the 4 Pin 3.5mm Jacks
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
H
Reliable
Hieronymus 21.02.2019
good for portable balanced analog transport
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

Hicon HI-J35T02