Harley Benton PJ-74 VW Vintage Series

I just catched the hype and I was tempting to try PJ combination. So I decided bought this one. This bass is very cool looking but realy needs some touch... Let me explain. You will pay for quite chep instrument but you will expect a lot... maybe too much.
I am skilled musician (not technicaly, but I have good experience with guitars and basses) and i needed freted bass for my homestdudio recordings (got on Vintage ICON fretless).

CONS:
* the first thing I regretted was the fact that the frets were sharp and poorly cleaned on the edges of the fingerboard, it is 1st touch and you feel FU*K, I did't expected it
* the secound thing - also neck - it is bit wider, I mean a lot comapring to VINTAGE or some Squiers. You can see the pitch distance between strings is wider

After this knowledge I was decided to return the bass right over...
I started looking for VINTAGE basses which I alway liked, but no PJ. I almoast ordered JB but at the same time I started to think that I would clean up the fret ends and buy new pickups... So I did it.
The frets are now fine plus I aplied 3 times lemon oil on thirsty-dryied blackwood fingerboard. I throw out the Roswell shi*s and bouht EMG GZR Alnico5 P-Bass + ceramic/steel J (the EMG GZR PJ set is widely sold out). With these PUs youll get complete electronics (pots and wires etc.) - but for double prize. These pickups costs same like the bass itself.

PROS:
* low prize
* good upgrade platform - there is big space under pickguard for upgrade even active pups/electronics
* looks very nice

FINAL VERDICT:
After upgrade it is good versatile instrument with interesting sound. For recording it is fine, I wouldn't gig with that, because of wide neck (and flatter radius). For the prize of bass and new pickups you can have Vintage JB or PB - better crafted instruments, but the Wilkinson pickups cant stand against EMG.
If you don't want to upgrade, you stil get fine looking bass with quite good (usable) sound and some roughness around neck.

BEFORE upg - 3 STARS
AFTER upg - 4 STARS

I've been a (bad :) ) guitarist for the past 15 years and always felt tempted to start learning a bass guitar. My plan was to use this bass mainly for home practising and experimenting with the bass or maybe smallish jam session with friends or in the pub.
I did quite a lot of research - my top priority was playability over looks. This was my pick based on the reviews here and some youtube videos as all of them claim very good value for the money (so my expectation was quite high).
The bass arrived in good packaging and out of the box it looked very well. The finish is very good for the money. Nice color of the body and matching headstock, neck with a great wood texture and satin finish. The frets are nicely done and there are no sharp edges. There are small flaws around the truss rod hole and the place where the neck joins the body. The pickguard has some very small flaws around the edges. It is covered with a thin film, which can be removed and the looks and feel of it will greatly improve. All in all I am just nitpicking here - the finish is really good and I wouldn't be bothered by it for instruments costing twice the money of this one.
From playability perspective the bass is amazing and very well setup out of the box. Bass arrived almost in tune. The intonation (through saddles on the bridge) is well setup and the intonation across the fretboard is good (checked with a tuner), the neck is straight. The same applies to the action (though I adjusted it to my taste). The bridge, nut and tuners feel cheap (you can actually find them to be low cost parts on aliexpress), but do their job. I had some issues with rattles in the bridge, but that got resolved by playing with it a bit. The pickups work fine and give a nice tone (nothing really fancy, but works well). Again, amazing value for the money - the bass is perfectly playable.
All in all I am very satisfied and happy with this purchase - I've been playing the bass every day for the past month and I am still enjoying it (and haven't found any more serious flaws yet). Just like the others I don't understand what kind of magic HB does in order to deliver that good bass for the money.

Ok, it's not a vintage Fender Precision but for the money, this bass is certainly pretty close. I bought this model on reviews I found online, with a view to modifying it.

Certainly, the tuners are not brilliant and the electronics could benefit from shielding - some copper tape will sort this out. The pickups are fine to be getting on with especially the split pickup - very gutsy. For that matter, the single coil bridge pickup is no more noisy than a Fender counterpart; single coils are noisy unless they're hum-cancelling - but, you knew that especially if you've ever owned a 'jazz' bass.

The fret job on this particular instrument is again 'ok' but there are one or two rough fret ends that slipped through QC - but, nothing that a once-over with a fret file won't sort out. I had to set the bass up - a small turn of the truss rod and adjustment on the bridge for string height - done.

The general quality of the bass is great and it 'feels' like a pricier instrument. I had returned an HB JB75 because at around 5kg, it was just too heavy although again, a superb instrument and cheaper than the one I'm reviewing. In an ideal world, I would swap the neck as I really loved the profile of the JB75's, however, this instrument has a great neck too, but the profile is obviously, 'Precision' spec. It still plays like a dream after my set up. Who knows, it may be on the mod list later on. For now, it's really the tuners that I intend to replace with Wilkinson's - cheap and efficient. I'm happy with the stock Roswell pickups - they do the job and the bass sounds great recorded.

The neck pocket is really tight and aesthetically, the bass looks great with the cream finish (off white) and red tort scratchplate - classic combination. Again, in an ideal world, I'd love this bass in fiesta red who knows, another mod?

I can't say I'm too impressed with the D'Addario EXL .045 - .100 roundwound string set either and to be honest, with the amount of grime on my fingers, I'm not entirely convinced that they're genuine but again - the strings will be replaced with ones I like.

In conclusion, the main thing here is value for money and a really useable instrument that I would happily gig. I'm not even going to hide the name on the headstock; Harley Benton are making some very good basses at least, this one and the JB75 NA, that I've played.

UPDATE - I ditched the Roswell pickups in the end and replace the neck p/up with one taken from my 90's MIJ Fender Precision and the bridge p/up from my Squier Jazz - what a difference! The original Roswell p/ups were fine but now the bass sounds even better! I also replaced the strings with some unidentified round wounds I had lying around as I wasn't keen on the D'Addario's this bass came with. I also replaced the plastic nut with a bone one and oiled the fretboard with linseed oil. Now it even smells like a much more expensive instrument (plays and sounds like one too)! I have still to replace the tuners and will probably use lightweight ones rather than the Wilkinson's I intended maybe Hipshot or similar.