Doepfer A-180-9

21

Multicore Module

  • Ideal for connecting multiple systems or housings
  • Up to 14 signals can be transmitted via common network cables (RJ45)
  • Width: 2 x 4 HP
  • Depth: 25 mm
  • Power requirement: +0 mA (+12 V) / -0 mA (-12 V)
  • Compatible with Intellijel Octalink 1U (Article Nr. 461580), not included
  • Scope of delivery: 2 modules and 2 network cables with a length of 0.5 m
K dostání od Březen 2018
Číslo produktu 435481
Prodejní jednotka 1 ks
Width 4 TE / HP
Tools 1
2 990 Kč
Cena vč. DPH nezahrnuje poštovné 295 Kč
Na skladě
Na skladě

Tento produkt je na skladě a může být obratem odeslán.

Informace o expedici
Odešleme pravděpodobně do Sobota, 4.05.
1

21 Hodnocení zákazníků

4.8 / 5

Musíte být přihlášeni, pokud chcete hodnotit produkty.

Upozornění: Abychom zabránili tomu, že se budou hodnocení zakládat informacích z doslechu, polovičních pravdách nebo skryté reklamě, dovolujeme na našich stránkách hodnotit pouze skutečným uživatelům, kteří u nás vybavení také koupili.

Po přihlášení najdete také v zákaznickém centru v sekci "Hodnotit produkty" všechny produkty, které můžete hodnotit.

Ovládání

Vlastnosti

Zpracování

18 Recenze

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
v
Neat & effective solution to carry CV and Audio
vovali 09.07.2019
I used the A-180-9 to carry CV signals between two euroracks 6 meters apart, and it worked perfectly.
Then I tested two A-180-9 carrying stereo audio signals from a patchbay (with amps, instruments, & effects), to a mixer, a tape recorder and A/D interface, all gathered 10 meters apart from that patch bay.
So Mixer, recorder and A/D were connected to one A-180-9 with short mono cables, then the two ethernet cable (well shielded, good quality CAT 6) went across the battlefield to the other A-180-9 close to the patchbay. Good signal, no interferences, no crosstalk.
I managed just two cheap long cables on the floor instead of 14 expensive ones. For this price is ace.
Ovládání
Vlastnosti
Zpracování
5
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
jn
Great modular utility
james n 22.11.2022
Fantastic for reducing cable spagetti between different cases. It takes some testing of how to divide/pair the cables setting between audio and control voltage cables as there can be significant "leakeage" and ghost interference. But all in all I love these modules (I have 6 of them)
Ovládání
Vlastnosti
Zpracování
1
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
x
a very useful tool
xavierxeon 06.05.2021
I have the 2 modules of the multicore on opposite ends of one 178 HP rack, so I do not need to have a lot of cables going across the rack. The 2 CAT6 cables connecting the multicores run behind the rack (3 meters, not the short ones supplied with the units).

It really helps clean up cable clutter and thus have more space for my hands to actually turn knobs on the modules.

Downsides are, that there is a light crosstalk between the channels (which you only here if you connect a cable from an unused channel to a mixer and crank up the volume) and that the cables going in / out of the multicore are bunched up really tight together.
Ovládání
Vlastnosti
Zpracování
3
1
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
M
Helps bring sanity to wiring mess
Mibix 21.01.2022
nice for helping to limit the cables between cabinets. great for CV. have to be careful with audio. there can be some crosstalk. using cat8 cables helps but does not completely eliminate crosstalk.
Ovládání
Vlastnosti
Zpracování
1
0
Ohlásit hodnocení

Ohlásit hodnocení