Roland Rubix44

Omdat ik thuis 4 sporen tegelijk op wilde nemen EN een goede interface voor Reason wilde (met lage latency) heb ik deze Rubix 44 gekocht.
Met de Roland ASIO driver (Windows 10) werkt dit vlekkeloos.
Lage latency en 4 sporen tegelijk opnemen.

Direct monitoring is ideaal als je over een bestaande opname wilt spelen. Dan ben je helemaal van de latency af (voor terugluisteren).

4 uitgangen is ook ideaal, zodat we de clicktrack van Reason naar een derde kanaal kunnen sturen (alleen voor de monitor mix).
Compressoren (instelbaar als limiter of compressor) zijn handig om al aan de hardware kant te hebben.
De input leds zijn ook handig om oversturing te zien tijdens het opnemen.
Ik heb geen last van brommen etc. ook niet live.
De koptelefoon uitgang is (meer dan) voldoende voor een 80 Ohm koptelefoon en geeft een goed geluid.
Enig minpunt(je) wat ik kan bedenken is dat de kleine draaiknoppen een beetje stroef gaan.
Geen groot probleem verder.
Al met al een prima aankoop, zeker voor de prijs.

Roland created a sturdy (metal and high grade plastics), stable and very compatible audio interface. It works on Windows 10(with ASIO drivers from Roland), Linux (plug-n-play) and my Android phone.
Latency is lowest on my Linux RT kernel, for Windows I probably need to find the best trade-off between buffer size vs latency and very high on my Android phone (approx 300ms), but that is to be expected. Monitoring works great, both direct and with signal back via PC, although latency can become an issue.
The interface does not need any sound setup from the computer, everything is configurable from the front panel, except for the compressor modes (switch at the back of the unit). The leds are useful and practical enough for monitoring peaks, although there are only 3 modes leds off/green/red. Knobs are sturdy. Only gripe is that the on/off switch is at the back of the unit, I'd rather have it at the front or integrated in the volume knob..
The midi setup is also working and a nice addition for cable management, as I only need one USB cable to connect to the workstation.
I use it to record voice (with 48v powered condenser mic's) and guitar (both direct and via amp head with XLR and/or Line-out connection). Low/no noise on interface. I've also used the interface to rip some old cassettes and vinyl to a digital format.
The limiter/compressor is a nice feature although I really need to test out the different settings with my guitars connected. Compressor 1 according to the manual is for guitar/drum and comp2 for voice, need to check the effects on both.
I haven't tested the loop function or the analog outputs yet.

Using it for about a year.

Pros
* The hardware design and illumination is nice
* The controls is for people who prefer buttons and knobs over the software control
* The body is solid.
* Used it to record guiitar and bass guitar (including of mic preamps usage) in studio, the sound quality are excellent,
* The software control are very minimal

Cons
* The latency with acceptable buffer size (I use USB steaming mode 5 ) is bad, about ~22/30ms, which is not acceptable for monitoring while playing via DAW. So i use direct monitoring.

I bought the Roland Rubix over the Scarlett 4i4 because it has a build in compressor that "might just safe you" when you need it.

Overall the unit is rock solid. I love the way it looks. Preamps are good... but.. don't crank them. They def. get noisy over 75%. So if you want to use it with a sm7b a CloudLifter would be a must, and even then you are probably better of with a Presonus unit.

Drivers etc work well. I run it at 10ms in Reaper most of the time so that is fine as well. Monitoring on the unit is latency free and easy to use. You can also loop between out and inputs which can be useful.

Groundlift is a nice to have as well.