ABM 6210 Webster Nut SC Style

144

Topkam voor Single Cut-Gitaren

  • Verstelbare messing Topkam
  • Breedte: 42,80 mm
  • Diepte: 4,90 mm
  • Snaar-afstand: 7,00 mm
  • Made in Germany
Leverbaar sinds Juli 2010
artikelnummer 250642
verkoopseenheid 1 stuk
Width in mm 43 mm
Unmachined No
Instrument LP-Style
€ 24,90
Incl. btw plus € 5,90 verzending
direct leverbaar
direct leverbaar

Dit product is op voorraad en kan direct verzonden worden.

Informatie over de verzending
Levering ongeveer tussen Dinsdag, 14.05. en Woensdag, 15.05.
1

144 Klantenbeoordelingen

4.3 / 5

U moet ingelogd zijn om producten te evalueren.

Note: Om te voorkomen dat evaluaties gebaseerd zijn op roddel, geruchten of heimelijke advertentie staan wij op onze website alleen evaluaties toe van daadwerkelijke gebruikers die het geevalueerde product bij ons gekocht hebben.

Na inloggen vindt u alle producten die u kunt evalueren ook onder “Product evalueren” in uw klantencentrum.

afwerking

86 Recensies

A
Not only for SC guitars
Anoniem 03.11.2016
Fits my jackson JS11 perfectly. Only it was not as high as the original. It's a good thing you can lower or raise the screws to adjust string height.

Glueing metal on wood was no problem with some universal super glue from a good quality brand.

No rattling noises, Can't really notice any difference in tuning stability or other functions yet (replaced because original plastic nut broke)

One negative point : In comparison to other nuts this is kind of expensive
afwerking
0
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
P
For me it works great
PaulPp 06.04.2021
I have it in my (Korean) epiphone the dot guitar with .10 gauge stings. It's a very high quality product, very well made. It's depth do not exactly fits my guitar neck, I think the neck is 43mm. But that's not a real problem.
It enhances sustain noticeably and it's easy to set it. It will take you some time to set the individual height properly but when you're done with that your setup will be great. I did use a caliper to set it with precision and the result is amazing. Do not set all the strings at the same height. If you want to take the full advantage of the product be thorough and precise. String gauge, neck radius and relief are very important. First set the relief, then the nut height, and then the action for better results. Captain obvious here!
It does change the quality of the sound not only sustain wise (a Lot!) but also tone wise (a little). It can slightly open the high frequencies, not in a bad way. You will hardly notice the tone difference when you play through an amp.
I will definitely buy another one
afwerking
2
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
GL
Great quality but needs adjustments.
Göran L. 16.05.2014
I thought that this was replacement for a standard nut. The qaulity and the craftmanship is flawless and the sound from the brass nut is pretty cool. It ads sustain and the instrument gets a more bell-like tone.

I bought this for a restoration of a old Hamer Special and needed a new nut because the old one was long gone. Since I don't have the proper tools or skill to make a nut from scratch I choose to try this one out because you can easily change the height of each string with a small screwdriver.

I works ok for trying the guitar out and for light playing but if you play to hard the string will drop out of the very shallow slot and get out of position and out of tune.

To avoid this you have to file the slots deeper and for that you need the proper tools.

It´s a great thing to play around with but you'll probably do better with a standard nut from bone or solid brass.

If you have an instrument with no angle over the nut it will probably work just fine.
afwerking
6
1
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
P
Well made
Pkxyz 11.10.2020
The nut was a bit of a hassle to install, because the slot was ever so slightly too tight. Setup was easy, and the installation increased sustain greatly.
afwerking
1
0
Evaluatie melden

Evaluatie melden