Göldo 500K log Mini Pot

331

Pot for Electric Guitar or Bass

  • Manufacturer designation: E500M
  • Small size
  • Housing diameter: 16.5 mm
  • Resistance: 500 kOhm
  • Resistance curve: logarithmic
  • Axle: coarsely fluted slotted axle (18 teeth for imported guitars & potentiometer knobs)
  • Thread diameter: 8 mm
  • Thread length: 10 mm
katalógusunkba bekerült: Április 2006
Termékszám 192488
mennyiségi egység 1 darab
Design Tone
Resistance Value 500 kOhms
Characteristic Curve Logarithmic
Thread Length 10,0 mm
Tandem Poti No
Push/Push No
Solderless No
shaft type grooved
1 222 ft
ÁFÁ-val, plusz 6 900 ft szállítási költség
Mennyiségi kedvezmény
Darabár Megtakarítás Mennyiség
1 222 ft 1
1 149 ft 6,0% 4
1 099 ft 10,1% 8
1 049 ft 14,2% 12
Azonnal szállítható
Azonnal szállítható

A termék raktáron van és azonnal szállítható

Szállítással kapcsolatos tájékoztató
Szállítás megközelítőleg Csütörtök, 2.05. és Péntek, 3.05. közt.
1

331 Ügyfelek értékelései

4.6 / 5

A termékek értékeléséhez kérjük, jelentkezz be.

Megjegyzés: Mivel szeretnénk megakadályozni, hogy az értékelések szóbeszéden, hiányos ismereteken alapuljanak, vagy rejtett reklámok legyenek, csak valós ügyfeleink számára tesszük lehetővé értékelések írását, akik valóban tőlünk vásárolták meg a terméket.

A bejelentkezést követően az ügyfélközpontban, a "Termékek értékelése" menüpont alatt megtalálsz minden terméket, amelyet lehetőséged van értékelni.

kivitelezés

102 Vélemények

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
S
Don't let the low price put you off
Sinest 12.09.2020
I used these on a Aria Pro II L5 style hollowbody guitar, to replace the old scratchy pots , 1 of which was completely dead so I had no sound on the neck pickup.
I wanted full size pots, but they did not fit on that particular guitar because of the small F-holes.
On the multimeter they measured from 485K to 530K which I think is great. I've seen CTS pots that are way worse off spec than these.
The taper also is nice and gradual.
They dont feel too loose like CTS but neither too stiff and slow to turn like Alphas. Just make sure you don't cook them with the soldering gun, then the soft feeling will go away and the pot might be ruined completely.
The shaft, axle and nuts could be made out of brass or something more sturdy, but they work fine anyway, just do not overtighten them.
For metric-mini-pots, that is my choice and I recommend them.
kivitelezés
0
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
P
Alright
Perwanie 01.05.2018
So these potmeters are good, easly to place and work smoothly.


Pros:
Cheap
Quality
Smooth running
Clear tone
Easy to assemble
Nice grip

Cons
The tone compared to fender pots are not as deep, but on the listening ear theres not too much difirence.
kivitelezés
0
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
D
Nice mini pot
DominikZ 17.08.2015
The operation is very smooth and slightly on the light side (which some will like and some won't). There is no unwanted noise from operation out of the box, but we'll see how it will hold up in the long run. It is a small body size pot, so it will fit in tighter spaces than a larger size pot. All in all, you can't really expect much more from a potentiometer :)
kivitelezés
0
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
A
Pots for my Hohner
Anonim 29.12.2014
I use this pot for my Hohner G2T. The electronics pocket is quite small so i choose the small pot shape. I replaced the original tone and volume pot with it. The pot is very easy to solder, both the contacts and the back of the pot. The pot works fine and is adjusted with a smooth feel. It does not produce any crackle sounds. It appears to be sturdy so i hope it has a good long term durability. I was more or less expecting the small pot shape not to produce enough friction whilst being turned due to the small face but it works just as fine as a big one.
kivitelezés
0
1
Jelentem!

Jelentem!