Behringer FCB1010

Nagyon jó ár / érték arányú kapcsolópedál. Strapabíró és csak elsőre tűnik nehéznek a programozása. Két segítség a használatához:

Programozás pedálokról (YouTube):
Behringer FCB1010 Full Tutorial / Video Manual

Programozás FCB1010 Manager programmal (YouTube):
FCB1010 Manager Tutorial -FCB1010 Editor for Mac & PC

A kezelésre azért adtam ****-ot, mert ha mindkét MIDI csatlakozó be van dugva (MIDI In és MIDI Out), akkor a kijelzőn a "88" felirat villog bekapcsolás után! Ez egy firmware hibajelenség. A háttérben ezt az MMSI-bemeneti porton keresztül érkező ActiveSense üzenetek okozzák az FCB1010 indításakor: bekapcsoláskor az FCB1010 RAM tesztet hajt végre, amelyet zavarnak a bejövő MIDI üzenetek.

Ezt a hibát az alábbiak szerint küszöböltem ki: Vagy csak az egyik vagy csak a másik kábel legyen a készülékhez csatlakoztatva! Tehát a MIDI In csatlakozót csak (!) a Manager szoftverből való felprogramozás során (FCB1010 SysEx Rcv pedál) kell használni. Az FCB1010 éles használat során pedig csak (!) a MIDI Out kábelt kell csatlakoztatni! A villogás így nem jelentkezik. Összegezve: a két kábelt Ne használjuk egyszerre!
Gyakori programozáskor ez kényelmetlen. Ha viszont ritkán van szükség az FCB1010 Manager szoftverre, akkor ennek nincs nagy jelentősége.
Az FCB1010 Manager szoftver különben nagyon kényelmes és villámgyorsan (pedál nyomogatás nélkül) használható.

Bought in Octber 2021, eprom has 2.5.0 version. Using it to control ableton live performances at home for my cat.
Well build and quite heavy. To connect it to computer you need to buy a midi interface, I am using simple "doremidi" just like "Thomann Midi USB 1x1" which you can buy here too.
There are plenty of reviews of this device on youtube and also here on Thomann and I don't want to repeat it all, just point out what was not clear for me after these riviews before buying it.
It works perfectly with Ableton, each switch (except Exp pedals) can send cCCs and PCs and a Note and all at the same time which allows you to control much more than one device (if you really need it). Someone on youtube told that Ableton prefers midi notes over CCs. Actually both are possible but I switched to notes just to have same commands as my Launchkey MINI has. Programming FCB itself is a nightmare so I strongly recommend using a dedicated sofware. There are few of them and all have good youtube tutorisals, its up to you wchich to chose. If you know what a midi is and what you actually want to configure it will not take you more than a day so don't be scared by complexity of a manual.
Switch 1 and 2 at the rear panel are the exits to switch presets of your amp via standard jack cable, they are no designed to connect additional pedals etc., but you can actually expand your FCB by connecting additional midi controller (any and not only a pedal) to MIDI IN and instruct FCB to merge incoming signals from its own signals ant send them all thru midi OUT.
Switches are pretty tight and quiet, much better than round metallic click clack buttons cheap pedals have. But there is a lack of feedback so I am not sure which moment exactly the pedal is pressed.
Sadly UP and DOWN buttons are not programmable, they are not sending any midi comands at all. Probably next UNO chip will have this option, they have it on a wish list according to their website. I would love to use it to switch scenes.
That's all for the less than a month use. Due to low price I round up my rating to 5 stars. If you need it it's worth buying it. Thnk you Thomann.

I definitely recommend this product. It is insanely flexibility (basically can do everything) and has great value for money.
There are a few things, however, which I think the average user should be aware of:
1. This devices has no graphical user interface.
2. This device has hardly any limitation as to what you can make each key press do.
3. The combined conclusion from the above two bullets is: you need to actually program the thing - using it's hardware to do so. Remember setting the time in your old watch, where you need to press and hold several buttons in a specific order to get things right? so just like that, but with far more options, and with many more buttons.
I had to watch a 45min YouTube video that explains how to program the thing. As the instruction manual is simply not up-to-par, I recommend you do the same :
you learned the principals, it's quite easy to get going with, and the added value of this extreme flexibility is very much present. You can literally program any switch to shoot any MIDI signal(s) of many types and on many channels. I can't imagine something it can't do.

Also, and regardless, my specific unit produces a certain "hum" when it is on. Not a deal breaker, but could be better off without it. Might be a grounding issue.

Bottom line:
- HUGE value for money. You can do SO MUCH with it...
- VERY LONG learning curve. Expect to spend at least a few hours until you get the hang of it. I am a professional programmer with embedded systems experience and it took me about 4 hours to get it right.