TritonAudio FetHead

Watching

Microphone Preamp

  • For dynamic and ribbon microphones
  • Extremely low-noise Class A JFet amplifier
  • 27 dB gain (@3 kOhm load)
  • XLR 3-pin female to XLR 3-pin male
  • 4 Coordinated JFets

Note: Requires 24 - 48 V phantom power and does NOT transfer phantom power to the microphone.

Further Information

Channels 1
Number of microphone inputs 1
Instrument input No
Tubes No
Compressor/Limiter No
Equalizer No
De-Esser No
Phantom power No
Phase Reverse No
External effect loops No
Analogue Outputs XLR
Digitale Outputs 0
Headphone connection No
Level Meter No

These are other customers' choices:

Customers who looked at this item have bought these:

TritonAudio FetHead
64% bought this exact product
TritonAudio FetHead
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
69 € Add to Basket
Thomann FetAmp
9% bought Thomann FetAmp 61 €
Klark Teknik Mic Booster CT1
8% bought Klark Teknik Mic Booster CT1 22,90 €
TritonAudio FetHead Phantom
5% bought TritonAudio FetHead Phantom 79 €
TritonAudio FetHead Germanium
2% bought TritonAudio FetHead Germanium 89 €
Our most popular Preamps
485 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 /5
  • handling
  • features
  • sound
  • quality
Total
handling
features
sound
quality
It turns my SM7B into a Beast
Gunso, 28.01.2021
Title pretty much sums it up.
The gain boost makes a night & day difference on my Shure SM7B.

Comparing it with the same mic but without the FetHead, I'd have to keep my microphone gain on my Scarlett 2i2 on max. volume just to get the same amount of gain that I'd get at around 35-40% with the FetHead on the same interface.

If you have a Shure SM7B and you're looking for that extra gain, I can't recommend the FetHead enough. It's a must have.

Although keep in mind that you can't plug it into the interface, you have to plug it into the microphone directly, otherwise you'll have a lot of noise. Not sure if it's a FetHead thing or a Scarlett thing.
Also, not sure if worth mentioning but since the SM7B is a dynamic microphone, you'll have to turn on Phantom Power on your interface after putting on the FetHead.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
features
sound
quality
Simplifies dynamic microphones with possible noisey interfaces
No Nayme, 17.11.2020
I use the triton FetHead with an RE320 - and a scarlett 2i2 - for online teaching (covid means teaching from home). Tried it with a 421, and a 57, and a beyerdynamic mkii, which all respond well.

Really simple to use, plug and play.

Nice clear clean gain boost once phantom power is on

No change to tone detected, but I haven't gotten Forensic with it, the boost in gain means less gain on the preamp, so no noise from lots of gain on the interface, and seems clean with long cable runs - haven't gone beyond 10m cable/run - but I'd trust it, and try it with a longer run, if the need arose.

It's plain and simple, - no features, no buttons or dials or switches,
feels sturdy - not sure how it'd take a knock while in the microphone, (if it took a knock looks like it could damage itself or the microphone) but once it's unplugged it transports easily - very small, could fit in a pocket or a pouch on a backpack, very easily and seems like you could drive over it without any issues.

Very happy I bought it, immediately made me want to buy another - perhaps the germanium one.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
features
sound
quality
A must-have for dynamic and ribbon mics
UrosR, 27.12.2020
I use it with all my dynamic and ribbon mics. On some interfaces, especially on scarlett (I use 2i2 2nd gen), I can hear the difference between two SM7B mics, of which only one is attached to a FetHead.

It makes me feel secure knowing that expensive ribbon mics are protected from phantom power, which I did accidentally turn on in the past :(

You can't go wrong with it. There are no buttons. I plug it into my mic, attach an XLR cable and it works.

Some mixers don't allow you to turn on phantom power for each mic input separately. FetHeads make it very easy if you're using a combination of dynamic and condenser mics. Using FetHeads, mics sound better with phantom power.

These are 4 advantages of a FetHead. So far, I haven't found a single disadvantage. In my opinion, this is a must-have item for dynamic and ribbon mics. Of course, you could buy a more expensive alternative, but there is no cheaper one.

If you spend a lot of money on a studio mic, why not add a FetHead which so many recommend?
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
features
sound
quality
Worth the money
gazoneill, 05.04.2021
I needed this to operate my Shure Sm7B mic. Having used a CloudLifter before, I wasn't sure if the Fethead would be any good. Honestly, it does sound great - and you can get a massive gain boost without any interference. There is a little hiss when you really crank it though, which I know isn't an issue with the CloudLifter.

My advise:
Fethead = does the job. Smaller, more compact. Cheaper alternative but not as clean as the CloudLifter in my opinion. It depends on what you're recording, really! Both will work just fine.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
69 €
Including VAT; Excluding 20 € shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times

Dispatch expected by Friday, 23.04.

Share This Product
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
Online Guides
Mic Preamps
Mic Preamps
Microphone preamps, are analogue devices that will remain important even as most other equipment is superseded by digital alternatives.
 
 
 
 
 
Downloads
Downloads
 
 
 
 
 
test results:
* The prices shown include VAT. and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in EUR.
11
(11)
Recently Viewed
Audient iD4 MKII

USB-C Audio Interface 24 bit / 44.1 - 96 kHz, ADC dynamic range: 121 dB, DAC dynamic range: 126 dB, @Class A Audient console microphone preamplifier, Mic Gain 58 dB,

Recently Viewed
Roli Lumi 1 Snapcase Black

Roli Lumi 1 Snapcase Black; sturdy and magnetic cover around the LUMI Keys for a slim and seamless fit; protects the LUMI Keys during transport and storage; easily folds into a stand for mobile devices; dimensions (W x D x…

Recently Viewed
Focal Alpha 50 Evo

Focal Alpha 50 Evo; active studio monitor; tweeter: 1" inverted aluminium dome tweeter 20W (Class D); woofer: 5" carbon fibre cone 30W (Class D); frequency range: 45 - 22000Hz (+/- 3dB); max. SPL: 101dB (peak @ 1m); Inputs: 1x Jack…

Recently Viewed
Alesis Nitro Expansion Pack

Expansion set for Alesis Nitro Mesh Kit Consist of 1x 10" One-Zone Pad and 1x 08" ON zones Tom Pad, Includes necessary rack clips, cymbal holder, L-rods and cables

Recently Viewed
Precision Devices PD.121/2 8 Ohms

Precision Devices PD.121/2 8 Ohms - 12" Speaker, Power Rating: 300W RMS, Impedance: 8 Ohms, Frequency Response: 100Hz - 6kHz, Sensitivity: 99 dB (1W1m), Weight: 9.2 kg

Recently Viewed
Patona Premium Akku V-Mount 95Wh

Patona Premium Akku V-Mount 95Wh BP-95W; V-mount battery with USB output; capacity: 95 Wh / 6600 mAh; voltage: 14.4 V; USB output: 5 V / 2.1 A; mount: V-Mount; 4-stage LED charge level indicator; eight cells; maximum discharge current: 10…

Recently Viewed
Warm Audio WA-MBA

Warm Audio WA-MBA; professional broadcast microphone boom; easy-to-operate clamping hinges; hidden cable management system;, Connectors with 3/8" and 5/8" thread, suitable for all common microphone mounts; integrated table clamp; Colour: black; Weight: 2.5 kg

1
(1)
Recently Viewed
Harley Benton AirBorne Go

Harley Benton AirBorne Go, hd modeling desktop guitar amplifier with built-in 2,4ghz wireless instrument system, bluetooth 4,2 dual mode connectivity, airborne go app for advanced tone editing, drum machine & rechargeable battery function, great features for wireless practice & play-along…

1
(1)
Recently Viewed
L.R.Baggs Voiceprint DI

Impulse Response di pedal for acoustic guitar Voiceprint DI measures the acoustic response of your guitar by leveraging the processing power of your iPhone® to accurately capture your guitar’s one-of-a-kind voice., Notch filter, Anti-feedback function, Phase circuit, Serial FX…

Recently Viewed
MOTU UltraLite mk5

USB 2.0 Audio Interface With USB C connector, ESS Sabre32 Ultra DAC technology, 24 Bit / 44.1 - 192 kHz, Precise level meters for all analogue inputs/outputs with high-resolution OLED display, 2 Microphone / line / Hi-Z inputs via…

Recently Viewed
Soundboks Backpack

Soundboks Backpack; fit all generations of Soundboks speakers; ergonomic comfortable design; easy to use and safe attachment of the speaker; made of stainless steel, nylon straps and foam pads; dimension (WxHxD): 510 x 430 x 220 mm; weight: 2,9kg; colour:…

Recently Viewed
Electro Harmonix Ripped Speaker Fuzz

Electro Harmonix Ripped Speaker Fuzz; Effects Pedal for Electric Guitar & Bass; low Fuzz settings emulate Vintage Lo-Fi Distortion Sounds created by a Razor Blade applied to a Speaker Cone, a loose Tube or a faulty channel on a Recording…

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.