Doepfer A-188-1C Vintage Edition

to the product

148 €

Brigade Device modules Vintage Edition, For BBD circuits with 2048 stages, For the A-100 modular system, Black front panel, Width: 14 TE / HP, Depth: 60 mm, Power requirement: +80mA (+12V) / -60mA...

• Reverb: Ne
• Module: Yes
• Delay: Yes
• Multieffect: No
• Empty Rack, Or Housing: No
• Misc. Effects: No
• Basic System: No
• Width: 16 TE / HP
• Accessories: No

to the product

85 €

Wasp Filter Special edition, Special 12 dB multimode filter, Circuit technology of the "EDP Wasp", Black front, Yellow pot caps, Width: 8 HP, Depth: 45 mm, Power requirements: +30 mA (+12 V)/-10 mA...

• Width: 8 TE / HP
• Module: Yes
• Empty Rack, Or Housing: No
• Basic System: No
• Accessories: No

to the product

75 €

Mini Stereo Mixer 4-in-2 mix module in Eurorack format, Four inputs with attenuator and pan control, plus two 3.5 mm mini jack outputs, Width: 8 HP, Depth: 30 mm, Power requirements: +10 mA (+12 V)...

• Modul Type: Stereo
• Module: Yes
• Width: 8 TE / HP
• Empty Rack, Or Housing: No
• Basic System: No
• Accessories: No

to the product

99 €

Frequency Divider For clock/trigger/gate signals, Width: 4 TE/ 4 HP / 20 mm

• Width: 4 TE / HP
• Module: Yes
• Empty Rack, Or Housing: No
• Basic System: No
• Accessories: No

to the product

69 €

External Input / Envelope Follower Module A-119 is used to integrate external audio signals into the system A-100, and includes the components pre-amplifiers, envelope follower and a comparator....

• Width: 8 TE / HP
• Module: Yes
• Empty Rack, Or Housing: No
• Basic System: No
• Accessories: No

to the product

35 €

Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...

• Width: 2 TE / HP
• Module: Yes
• Empty Rack, Or Housing: No
• Basic System: No
• Accessories: No

to the product

49 €

Synthesizer module Double buffered 1-in-3 multiple, For buffering and duplication of CV and audio signals, Width: 4 TE / 4HP / 20.0 mm

• Width: 4 TE / HP
• Module: Yes
• Empty Rack, Or Housing: No
• Basic System: No
• Accessories: No

to the product

66 €

Morphing Controller Module A-144 is a control voltage module, which is primarily used in combination with the voltage-controlled mixer (A-135). It generates four mutually offset triangular output...

• Width: 8 TE / HP
• Module: Yes
• Empty Rack, Or Housing: No
• Basic System: No
• Accessories: No

to the product

295 €

Analog-/ Trigger Sequencer 2 Switch rows with 8 steps each, Eurorack format, Width: 50 HP, Depth: 40 mm, Power requirement: +80 mA (+ 12 V) / -20 mA (-12 V), Optional expander module: Article Nr...

• Width: 50 TE / HP
• Module: Yes
• Empty Rack, Or Housing: No
• Basic System: No
• Accessories: No

to the product

65 €

Euro Rack Module Dual Sample & Hold, Two separate sample/hold circuits, Euro rack format, Power requirements: +20 mA (+12V) / -20 mA (-12V), Width: 4 HP / 20.0 mm, Depth: 30 mm (measured from the...

• Width: 4 TE / HP
• Module: Yes
• Empty Rack, Or Housing: No
• Basic System: No
• Accessories: No

to the product

75 €

ADSR Envelope Generator The module A-140 is a envelope generator and since it delivers control voltages, belongs to the modulation-modules. As soon as the ADSR is triggered at gate-input, it...

• Width: 8 TE / HP
• Module: Yes
• Empty Rack, Or Housing: No
• Basic System: No
• Accessories: No

to the product

119 €

Wave Multiplier A-137 is a voltage-controlled wave form multiplier (wave multiplier). The fundamental idea of ​​a wave multiplier is the multiplication of the waveform of an incoming audio...

• Width: 14 TE / HP
• Module: Yes
• Empty Rack, Or Housing: No
• Basic System: No
• Accessories: No