Doepfer A-189-1

Voltage Controlled Bit Modifier Module

  • 16 modes (addition, subtraction, multiplication or division)
  • Manual controller or via CV input (BC - number of shifted bits or SR - sampling rate)
  • Power requirement /: +50 mA (+ 12V) / -20 mA (-12V)
  • Width: 8 HP / 40.3 mm
  • Depth: 60 mm (measured from the back of the front panel)
No JavaScript? No Audio Samples! :-(

Sound samples

 
0:00
  • Demo 1
  • Demo 2
  • Demo 3
  • Demo 4

Further information

Reverb Ne

These are other customers' choices:

Customers who looked at this item have bought these:

Doepfer A-189-1
35% bought this exact product
Doepfer A-189-1
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
99 € Add to Cart
Doepfer A-199 Spring Reverb Module
17% bought Doepfer A-199 Spring Reverb Module 119 €
Mutable Instruments Rings
13% bought Mutable Instruments Rings 299 €
Xaoc Devices Kamieniec
7% bought Xaoc Devices Kamieniec 245 €
Dreadbox Echo
7% bought Dreadbox Echo 99 €
Our most popular Effect Modules
14 customer ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.7 / 5.0
  • handling
  • features
  • sound
  • quality
7 written ratings Read all reviews
Total

Multi-functional tool for audio and cv

30.03.2015
I've been putting this module to quite some uses, ranging from normal audio-destruction to CV-arpeggiators.

For audio, the 16 different algorithms create very different tonal colorations, which can be very well used to fatten up your sound when (filtered and) mixed with the original signal.

Used with LFO's it can create interesting patterns which change dynamically by controlling the cv inputs.

Put a noise through this module and control the cv inputs with A/D envelopes to quickly create hard snares, hihats and crashes (pairs good with the wiard noisering) and end off with a clamping vca.

Combine this module in mode 10/11 with a sample&hold and the A-183 offset generator in a feedback routing to make an continuously changing pattern. Add a voltage controlled switch in the feedback path for adding a reset/start-position option.
Helpful · Not helpful · Report review
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
features
sound
quality

A-189-1

Wasp Burgh, 08.04.2018
This bit modifier is cool module. It has 16 functions which effect the signal with cv control over it. I like bit crushing LFO's with it making them steppy waves. Plus it works nice on audio signals. I would recommend it if your looking for bit crusher then this will do the job. small hp helps for those smaller cases.
Helpful · Not helpful · Report review
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Doepfer A-189-1
(14)
Doepfer A-189-1

Voltage Controlled Bit Modifier Module 16 modes (addition, subtraction, multiplication or division), Manual controller or via CV input (BC - number of shifted bits or SR - sampling rate), Power...

  • Reverb: Ne
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-124 Wasp Filter SE
(34)
Doepfer A-124 Wasp Filter SE

Wasp Filter Special edition, Special 12 dB multimode filter, Circuit technology of the "EDP Wasp", Black front, Yellow pot caps, Width: 8 HP, Depth: 45 mm, Power requirements: +30 mA (+12 V)/-10 mA...

  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-110-1
(62)
Doepfer A-110-1
to the product
139 €

Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillator. The A-110-1 produces frequencies in a range of about 8 octaves, of which four waveforms are available...

  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-138s Mini Stereo Mixer
(7)
Doepfer A-138s Mini Stereo Mixer

Mini Stereo Mixer 4-in-2 mix module in Eurorack format, Four inputs with attenuator and pan control, plus two 3.5 mm mini jack outputs, Width: 8 HP, Depth: 30 mm, Power requirements: +10 mA (+12 V)...

  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-160-2 Clock Divider II
(12)
Doepfer A-160-2 Clock Divider II

Frequency divider For clock/trigger/gate signals, Width: 4 TE/ 4 HP / 20 mm

  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-100 LC1 Low Cost Case
(5)
Doepfer A-100 LC1 Low Cost Case
to the product
119 €

Case for Eurorack Modules Integrated power supply A-100SSB: +12 V / 380 mA, -12 V / 380 mA, To 48 TE shortened A-100LC3 version, Built-in bus board with 8 module slots, Casing made of raw wood -...

  • Module: No
  • Empty Rack, Or Housing: Yes
  • Basic System: No
  • Accessories: No
Doepfer A-180-2 Multiples
(60)
Doepfer A-180-2 Multiples

Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...

  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-180-3 Dual Buffered Multiple
(11)
Doepfer A-180-3 Dual Buffered Multiple

Synthesizer module Double buffered 1-in-3 multiple, For buffering and duplication of CV and audio signals, Width: 4 TE / 4HP / 20.0 mm

  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-119
(37)
Doepfer A-119

External Input / Envelope FollowerModule A-119 is used to integrate external audio signals into the system A-100, and includes the components pre-amplifiers, envelope follower and a comparator. The...

  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-132-3
(23)
Doepfer A-132-3

VCA Switchable characteristic between linear and exponential, Audio and CV signals can thus be optimally processed, Width: 8 HP, Depth: 50 mm, Power requirements: +30 mA (+12 V)/-30 mA (-12 V)

  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-140
(55)
Doepfer A-140

ADSR Envelope Generator The module A-140 is a envelope generator and since it delivers control voltages, belongs to the modulation-modules. As soon as the ADSR is triggered at gate-input, it...

  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-138b
(52)
Doepfer A-138b

Mixer with Logarithmic Potentiometers Primarily suitable for audio signals, Width: 8 HP, Depth: 35 mm, Power requirements: +10 mA (+12 V) / -10 mA (-12 V)

  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
99 €
Incl. VAT; plus 20 € shipping
Free shipping from 298 €
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share this product
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
Offers include 24% Greek VAT and are valid as long as stocks last. Shipping costs to Greece are 20 EUR, free shipping on orders above 298 EUR. Please click here for international Shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
Harley Benton Fusion-HSH Roasted Maple Slate Digital ML-2 DPA 4066-OC-A-F10-LH Slate Digital ML-1 IK Multimedia UNO Synth JHS Pedals The Bonsai Hercules Stands HCGS-414B+ Guitar Stand Zynaptiq Intensity Clavia Nord Music Stand V2 Tech 21 DP-3X Solar Guitars S2.6C K&M 17650 Guitar Stand
Recommended
Harley Benton Fusion-HSH Roasted Maple

Electric Guitar Ergonomically shaped mahogany body, "Ultra Flame" flamed maple veneer top, Matching headstock, Bolt-on neck from "roasted" Canadian flamed maple, "Roasted" maple fretboard, Neck shape: Modern C, Clay Dot fretboard inlays, 24 Medium jumbo stainless steel frets, Nu-Bone...

to the product
415 €
(2)
Recommended
Slate Digital ML-2

Small Diaphragm Condenser Microphone For Slate Digital VRS8 Thunderbolt audio interface, similar linear and flat frequency response to the Slate Digital ML-1, Allows microphone placement that is difficult or impossible for a larger microphone, Side mounted pad switch -...

to the product
159 €
Recommended
DPA 4066-OC-A-F10-LH

DPA 4066-OC-A-F10-LH, d:fine CORE 4066 Omni Headset Mic, professional headset microphone with removable and adjustable neck holder for left or right-sided use. Omnidirectional, 20Hz-20kHz with 3dB boost between 8-20kHz, 144dB SPL max.,TA-4F Switchcraft connector for Shure Transmitter . beige, Great...

to the product
719 €
Recommended
Slate Digital ML-1

Large-diaphragm condenser microphone Neutral ML-1 condenser microphone that can be combined with VMS hardware and software, Optional Neutral VMS preamp ensures minimal sound-colouration (not included!), Via VMS plug-in software, you can completely change the sound characteristics even after recording,...

to the product
866 €
Recommended
IK Multimedia UNO Synth

Monophonic analog synthesizer with step sequencer, arpeggiator and effects section Classic setup with 2 VCOs and noise generator, multimode filters, amps, 2 envelopes and LFO, Waveform VCOs Triangle, sawtooth and variable pulse width rectangle, Multimode filter with 12 dB...

to the product
233 €
(1)
Recommended
JHS Pedals The Bonsai

Effect Pedal Overdrive, 9 Tube Screamer Overdrive modes, 5 Classic TS circuits and 2 popular mods, Analogue operation, True bypass, Volume, sustain and tone controls, 9-Way rotary control to select between Tube Screamer modes (OD-1 / TS-808 / TS-9...

to the product
259 €
Recommended
Hercules Stands HCGS-414B+ Guitar Stand

Hercules Stands HCGS-414B +, AGS PLUS Guitar Floor Stand for All Electric Guitars / Electric Basses / Acoustic Guitars/Mandolinen/Banjos and Ukulelne, Auto Grab Holder automatically secures the instrument from falling out, (for standard widths of 40-52 mm) with improved foam...

to the product
44 €
Recommended
Zynaptiq Intensity

Zynaptiq Intensity (ESD); enhancer plugin; innovative algorithm increases detail, clarity, density and loudness of any audio signal; suitable for single tracks, groups, mixbus or mastering; easy to us clearly arranged user interface; additional soft-knee saturating limiter at the output stage;...

to the product
152 €
Recommended
Clavia Nord Music Stand V2

Clavia Nord Music Stand V2 - music stand for Nord C2 Combo Organ, Nord C2D, Nord Electro 3 HP, Nord Electro 4 HP, Nord Electro 5 HP, Nord Electro 6, Nord Piano 88, Nord Piano 2 HA88, Nord Piano 2...

to the product
70 €
Recommended
Tech 21 DP-3X

Preamp for bass dUg Pinnick signature model, Controls: volume, chunk, high, mid, low, comp, drive, Gain switch, Mix button, Chromatic tuner, XLR DI output, TRS input / output, Headphone output, Dimensions (W x D x H): 19.7 x 6.4...

to the product
299 €
(1)
Recommended
Solar Guitars S2.6C

Electric Guitar Body: Mahogany, Neck: Maple, Fretboard: Ebony, Neck profile: C, 24 Super jumbo frets, Graphite nut, Nut width: 43 mm, Scale: 647 mm, Pickups: 2 Duncan Solar humbuckers, Grover 18:1 locking machine heads, Colour: Carbon matte

to the product
711 €
(2)
Recommended
K&M 17650 Guitar Stand

Guitar Stand - Carlos Tall A-frame design, Can be folded flat, Support arms include protective felt pads, Suitable for guitars with nitrocellulose lacquer finishes, Neck lock (Security Lock), Colour: Black, Support depth: 125 mm, Dimensions: 410 x 515 mm,...

to the product
69 €
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.

Please leave a comment. Please enter your e-mail address.