Waveshaper, Distortion Modules
18 results. Displaying items 1–18.
The prices shown include VAT. Free Shipping Over 298 €
Compare Added (Remove)
No results were found :-(
One of your filters is filtering so well, that no products were found!
One of your filters is filtering so well, that no products were found!
You can remove your filters and start again or use the previous filter you selected.
Dreadbox Dystopia; Eurorack module; noise generator, Bitcrusher filter; Bitcrusher 1sec to 8kHz; parallel dual filter (12dB LP/HP); noise bypass when external signal is pluged in; 4 LEDs for level control; power consumption: 56mA (+12V) / 67mA (-12V); width: 10 HP;...
Eurorack module Distortion Module with Plasma Technology by Gamechanger Audio, Input Level, Wet / Dry Mix, Voltage and Voltage CV controls, Treble / bass equalizer, EQ bypass switch, Additional overtones via octave up / down switch, CV Inputs for...
- Distortion Module with Plasma Technology by Gamechanger Audio
- Input Level, Wet / Dry Mix, Voltage and Voltage CV controls
- Treble / bass equalizer
Wave multiplier and sub-octave generator module Classic diode design that adds odd harmonics by folding the incoming signal, generating up to 4 square waves spaced one octave apart, Width: 12 HP, Depth: 42 mm, Power requirement: +60 mA (+12...
- Classic diode design that adds odd harmonics by folding the incoming signal, generating up to 4 square waves spaced one octave apart
- Width: 12 HP
- Depth: 42 mm
Intellijel Bifold; Eurorack module; dual Wavefolder with Crossfader; offers a "buchla-Style" and a "Serge-Style" Wavefolding channel, each with CV input and attenuator; Crossfader with CV input and attenuator; can be used as a Ringmodulator or Noise-Generator; internal feedback routing and...
Wave multiplier A-137-1 is a voltage controlled waveform multiplier. The basic idea of a wave multiplier is to multiply the waveform of an incoming audio signal (e.g. triangle/sinus/sawtooth of a VCO) within one period. This creates additional harmonics in...
- Input Level to adjust different input levels for the optimal effect of the module
- Multiples: Number of curve multiplications, manual setting
- Harmonics: Adding additional harmonics by an effect similar to the resonance of filters, manual adjustment
Eurorack Module 2 Identical overdrive circuits in one module, Gain and Drive controls, Gain and Drive are CV controllable, Three different overdrive tones selectable, Power requirement: 58 mA (+12 V) / 58 mA (-12 V), Width: 10 TE, Depth:...
- 2 Identical overdrive circuits in one module
- Gain and Drive controls
- Gain and Drive are CV controllable
Erica Synths Fusion VCA / Waveshaper / Ringmodulator; Eurorack module; two audio inputs with Input Fader control; two manual Bias controls for the vacuum tubes and different effects on the audio signal; two Bias CV inputs with attenuators; "Direct" switch...
Voltage Controlled Bit Modifier Module 16 modes (addition, subtraction, multiplication or division), Manual controller or via CV input (BC - number of shifted bits or SR - sampling rate), Power requirement /: +50 mA (+ 12V) / -20 mA...
- 16 modes (addition, subtraction, multiplication or division)
- Manual controller or via CV input (BC - number of shifted bits or SR - sampling rate)
- Power requirement /: +50 mA (+ 12V) / -20 mA (-12V)
Joranalogue Audio Design Fold 6; Eurorack module; analog Wavefolder; contains a parallel and serial Wavefolder circuit with 6 stages; manual controls for Fold, Shape and Symmetry; connections: two signal inputs, CV inputs for Fold and Shape, signal outputs for the...
Eurorack Module Voltage controllable dual wave-folder, Two independent channels with adjustable wave-folding intensity, 2 CV inputs per channel (1x with bipolar attenuator), Chop output can switch between both output signals without crackling, Current consumption: 65 mA (+12 V) /...
- Voltage controllable dual wave-folder
- Two independent channels with adjustable wave-folding intensity
- 2 CV inputs per channel (1x with bipolar attenuator)
Klavis Flexshaper; Eurorack module; CV-controlled voltage mapper and waveshaper; suitable for CV and audio signals; works as Limiter, Distortion, Clipper, Waveshaper, Frequency Multiplier, Inverter, shaping-tool for envelope and LFO voltages and more; the input signal is modified at 5 defined...
Erica Synths Pico Drive; Eurorack module; combined Overdrive and Wavefolder; manual controls for Drive and Gain; Gain CV input with attenuator; Drive CV input; output signal limiter; power consumption: 29mA (+12V) / 29mA (-12V); width: 3 HP; depth: 35mm
Distortion / Waveshaper The A-136 is a distortion and wavehaping module with extensive adjustment parameters. The input signal (audio- or control voltage), is first divided inside the module into 3 separate signal paths, which are mixed together at the...
- Positive component of the signal with adjustable clipping threshold (also externally); and gain / roll-off (+/-)
- Negative component of the signal with adjustable clipping threshold (also externally); and gain / roll-off (+/-)
- Original signal with adjustable gain / roll-off (+/-)
Befaco Sampling Modulator; Eurorack module; multi-function module for modifying CV and audio signals; can be used as VCO, trigger generator, complex Sample & Hold, waveshaper, down-sampler, 8-step sequencer and more; internal VCO with Rate and Fine tuning controls; 8 switches...
Waveform Processor The A-116 module provides voltage-controlled, dynamic waveform modification of audio signals. It can produce new waveforms from the standard, basic forms; with such changes also having the option of being modulated. The signal first of...
- Width: 8 HP / 40.3 mm
- Depth: 40 mm (measured from the rear side of the front panel)
- Power requirement: +20 mA (+ 12V) / -20 mA (-12V)
Sinus Converter / VC Crossfader Eurorack module, Combines two functions in one module: triangle to sine converter as well as voltage-controlled crossfader, Power requirement: +30 mA (+ 12V) / -30 mA (-12V), Width: 4 HP
- Eurorack module
- Combines two functions in one module: triangle to sine converter as well as voltage-controlled crossfader
- Power requirement: +30 mA (+ 12V) / -30 mA (-12V)
Eurorack module Waveshaper and distortion in one module, Both units can be used separately or connected in series, CV inputs for shape and distortion intensity, Hard and soft clipping selectable, Audio input & output for shaper and distortion, Shaper...
- Waveshaper and distortion in one module
- Both units can be used separately or connected in series
- CV inputs for shape and distortion intensity
ADDAC 611 Gotharman's VC Tube Filter; Eurorack module; Tube-Multimode-Filter; manual controls for Cutoff, Resonance, Drive and Wet/Dry; build-in 3-channel mixer with level controls and feedback-loop; CV inputs for Drive, Mix, Cutoff and Resonance (each with attenuverters); adjustable Mix-Out; Bandpass, Lowpass...
* The prices shown include VAT. and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in EUR.
Feedback Found an error or want to give us feedback about this page?
We're looking forward to hearing from you and aim to solve any problems as soon as we can.
© 1996–2021 Thomann GmbH Thomann loves you, because you rock!