Cordial CDMX 1

DMX Cable

Long digital transmission paths require cable types that keep the voltage drop as low as possible. Cordial therefore manufactures CDMX cables according to EIA 485 standard and DMX 512 specification with a conductor cross-section of at least 0.22 mm² (AWG24). A double shielding as required by PLASA and USITT is achieved by the combination of foil and braid shield and also gives the CDMX a high tensile strength. With a baud rate of 250 kHz, this cable can reliably achieve the required impedance between 100 and 120 Ohm and is therefore equally suitable for the transmission of DMX as well as AES / EBU signals.

  • Conductor cross section 0.22 mm²
  • Conductor construction 7 x 0.20 Cu tinned
  • Conductor insulation PE
  • Wire arrangement 1 x 2
  • Pair of screen foil (PT / AL) + cable strand
  • Overall screen braid made of. Cu wires
  • Overall sheath PVC matte
  • Overall diameter 4.5 ± 0.2 mm
  • Weight 30 g / m
  • Conductor resistance 56 Ohm / km
  • Capacity (conductor / conductor) 54 pF / m
  • Capacity (conductor / screen) 110 pF / m
  • Damping 1 MHz 3.2 dB (100 m) / 4 MHz 9.3 dB (100 m) / 10 MHz
  • 14.0 dB (100 m)
  • Wave impedance 1 MHz 111 ohms / 4 MHz 108 ohms / 10 MHz 105 ohms
  • Test voltage (wire / core) 500 V eff
  • Colour: Black

These are other customers' choices:

Customers who looked at this item have bought these:

Cordial CDMX 1
51% bought this exact product
Cordial CDMX 1
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
1,40 € Add to Cart
Sommer Cable Binary 234 DMX
16% bought Sommer Cable Binary 234 DMX 1,90 €
Sommer Cable Binary 234 DMX Blue
8% bought Sommer Cable Binary 234 DMX Blue 1,90 €
Cordial CDMX 234
7% bought Cordial CDMX 234 1,50 €
Sommer Cable Binary 234 AES/EBU MKII GR
3% bought Sommer Cable Binary 234 AES/EBU MKII GR 1,90 €
Our most popular Cables for Digital Signals
70 customer ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.5 / 5.0
  • quality
25 written ratings Read all reviews
Total
quality

Great cable for light installations.

tsiguel, 12.01.2018
Used this cable to cut to length in the theatre DMX lighting setup. The cable is very high quality and have had no issues. As it is such a simple item, cannot see why it should not have the highest rating

Will buy again, recommended.
Helpful · Not helpful · Report review
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
fr Automatically translated (Show original)
frOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total

A low quality DMX cable

Just1, 18.07.2011
It is a cable specific to DMX (impedance of 110 Ohms, that is to say in the standard: between 100 and 120 Ohms), because everyone knows (or should know) that it is not good to use audio cables to transmit digital data for lighting. Moreover, this cable is also suitable for digital audio signals (AES / EBU).
Nothing to report during assembly: it is a cable with 3 stranded conductors, one of which is ground, which is in electrical contact with the ground strap which provides the cable, with the strap, its shielding; the other two are 0.22mm² section, which is identical to the audio cables.
The cable is thin (finer than a CMK 222 audio cable for example, because the plastic sheath is thinner). Beside that, I am a little disappointed with the use (Live) because it is a fairly rigid cable, in which it is easy to elbow very marked, which gives an impression of fragility. But of course we must not forget that it is the DMX cable at the cheapest meter of the Thomann stock, and when you order 400 meters, it plays on the scale! And then it's perfect for installation cable.
Helpful · Not helpful · Report review
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
1,40 €
Incl. VAT; plus 20 € shipping
Free shipping from 298 €
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Quantity discount
Amount Price per piece You save
1 1,40 €
100
1,30 € 7,14 %
Share this product
Your Contacts
PA
Phone: +49-9546-9223-35
FAX: +49-9546-9223-24
free download
All connected!
With the Cableguy you will find your cables easily and com­fort­ably!
Find cables
Download
 
 
 
 
 
test results:
Offers include 24% Greek VAT and are valid as long as stocks last. Shipping costs to Greece are 20 EUR, free shipping on orders above 298 EUR. Please click here for international Shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
Harley Benton Fusion-HSH Roasted Maple Slate Digital ML-2 DPA 4066-OC-A-F10-LH Slate Digital ML-1 IK Multimedia UNO Synth JHS Pedals The Bonsai Hercules Stands HCGS-414B+ Guitar Stand Zynaptiq Intensity Clavia Nord Music Stand V2 Tech 21 DP-3X Solar Guitars S2.6C K&M 17650 Guitar Stand
Recommended
Harley Benton Fusion-HSH Roasted Maple

Electric Guitar Ergonomically shaped mahogany body, "Ultra Flame" flamed maple veneer top, Matching headstock, Bolt-on neck from "roasted" Canadian flamed maple, "Roasted" maple fretboard, Neck shape: Modern C, Clay Dot fretboard inlays, 24 Medium jumbo stainless steel frets, Nu-Bone...

to the product
415 €
(2)
Recommended
Slate Digital ML-2

Small Diaphragm Condenser Microphone For Slate Digital VRS8 Thunderbolt audio interface, similar linear and flat frequency response to the Slate Digital ML-1, Allows microphone placement that is difficult or impossible for a larger microphone, Side mounted pad switch -...

to the product
159 €
Recommended
DPA 4066-OC-A-F10-LH

DPA 4066-OC-A-F10-LH, d:fine CORE 4066 Omni Headset Mic, professional headset microphone with removable and adjustable neck holder for left or right-sided use. Omnidirectional, 20Hz-20kHz with 3dB boost between 8-20kHz, 144dB SPL max.,TA-4F Switchcraft connector for Shure Transmitter . beige, Great...

to the product
719 €
Recommended
Slate Digital ML-1

Large-diaphragm condenser microphone Neutral ML-1 condenser microphone that can be combined with VMS hardware and software, Optional Neutral VMS preamp ensures minimal sound-colouration (not included!), Via VMS plug-in software, you can completely change the sound characteristics even after recording,...

to the product
866 €
Recommended
IK Multimedia UNO Synth

Monophonic analog synthesizer with step sequencer, arpeggiator and effects section Classic setup with 2 VCOs and noise generator, multimode filters, amps, 2 envelopes and LFO, Waveform VCOs Triangle, sawtooth and variable pulse width rectangle, Multimode filter with 12 dB...

to the product
233 €
(1)
Recommended
JHS Pedals The Bonsai

Effect Pedal Overdrive, 9 Tube Screamer Overdrive modes, 5 Classic TS circuits and 2 popular mods, Analogue operation, True bypass, Volume, sustain and tone controls, 9-Way rotary control to select between Tube Screamer modes (OD-1 / TS-808 / TS-9...

to the product
259 €
Recommended
Hercules Stands HCGS-414B+ Guitar Stand

Hercules Stands HCGS-414B +, AGS PLUS Guitar Floor Stand for All Electric Guitars / Electric Basses / Acoustic Guitars/Mandolinen/Banjos and Ukulelne, Auto Grab Holder automatically secures the instrument from falling out, (for standard widths of 40-52 mm) with improved foam...

to the product
44 €
Recommended
Zynaptiq Intensity

Zynaptiq Intensity (ESD); enhancer plugin; innovative algorithm increases detail, clarity, density and loudness of any audio signal; suitable for single tracks, groups, mixbus or mastering; easy to us clearly arranged user interface; additional soft-knee saturating limiter at the output stage;...

to the product
152 €
Recommended
Clavia Nord Music Stand V2

Clavia Nord Music Stand V2 - music stand for Nord C2 Combo Organ, Nord C2D, Nord Electro 3 HP, Nord Electro 4 HP, Nord Electro 5 HP, Nord Electro 6, Nord Piano 88, Nord Piano 2 HA88, Nord Piano 2...

to the product
70 €
Recommended
Tech 21 DP-3X

Preamp for bass dUg Pinnick signature model, Controls: volume, chunk, high, mid, low, comp, drive, Gain switch, Mix button, Chromatic tuner, XLR DI output, TRS input / output, Headphone output, Dimensions (W x D x H): 19.7 x 6.4...

to the product
299 €
(1)
Recommended
Solar Guitars S2.6C

Electric Guitar Body: Mahogany, Neck: Maple, Fretboard: Ebony, Neck profile: C, 24 Super jumbo frets, Graphite nut, Nut width: 43 mm, Scale: 647 mm, Pickups: 2 Duncan Solar humbuckers, Grover 18:1 locking machine heads, Colour: Carbon matte

to the product
711 €
(2)
Recommended
K&M 17650 Guitar Stand

Guitar Stand - Carlos Tall A-frame design, Can be folded flat, Support arms include protective felt pads, Suitable for guitars with nitrocellulose lacquer finishes, Neck lock (Security Lock), Colour: Black, Support depth: 125 mm, Dimensions: 410 x 515 mm,...

to the product
69 €
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.

Please leave a comment. Please enter your e-mail address.