Sivun sisältöön

Microphone Preamp

  • For condenser microphones
  • Extremely low-noise Class A JFet amplifier
  • XLR 3-pin female to XLR 3-pin male
  • 18 dB gain (@3 kOhm load)
  • 4 Coordinated JFets
  • 48 V Phantom power
  • Transfers phantom power to the microphone
  • Myynnissä vuodesta Toukokuu 2018
  • Tuotenumero 439148
  • Myyntierä 1 kappaletta
  • Channels 1
  • Number of microphone inputs 1
  • Instrument input No
  • Tubes No
  • Compressor/Limiter No
  • Equalizer No
  • De-Esser No
  • Phantom power No
  • Phase Reverse No
  • External effect loops No
  • Analogue Outputs XLR
  • Digitale Outputs 0
  • Headphone connection No
  • Level Meter No
  • Design Adaptor
79 €
Kaikki hinnat sis. ALV:n
Varastossa
1

134 Asiakkaiden arviot

4.7 / 5

Käyttö

Ominaisuudet

Ääni

Työnjälki

83 Arvostelut

Z
Pienikokoinen ratkaisu lisätä gainia
Zandeleisson 04.05.2020
Tällä hyvin kompaktilla esivahvistimella saa +18dB gainia. Hiljaisempikin mikrofoni herää eloon. Tässä versiossa phantom-virta kulkee läpi, jolloin konkkamikki saadaan eloon. Todella pienikokoinen. Laitteessa ei ole mitään säätöjä, mutta mikserin gainilla löytyy oikea tulotaso.
Käyttö
Ominaisuudet
Ääni
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
z
Perfect for my needs
zorglub76 08.03.2021
First of all, I don't have a producer's ears. So when I say that there's absolutely no noise when using these preamps, take it with a grain of salt.
I have a specific problem that I tried to solve with the FetHead, and I solved it easily. The problem is that I'm getting some digital noise in my Focusrite Scarlett whenever I turn gain passed 1 o'clock. I don't know if it's a psu, or the nearby laptop or something else, but I couldn't get rid of it.
Now, with the FetHeads, I pre-amplify my mic, and I need just a slight gain from Scarlett, so the noise is gone! The sound is exactly the same as without the FetHead, just louder. I hear no distortion or noise. I'm using Lewitt small diaphragm mics that are especially noiseless, but I hope the others would behave the same.
I'd recommend FetHead as a cheap solution to any gain related problems you might have.
Käyttö
Ominaisuudet
Ääni
Työnjälki
7
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
L
perfect for hydrophone drop rigs
LutherD 16.04.2026
I use these preamps for a very particular purpose. I sometimes record with some DIY self built hydrophones (the gladys hydrophones), and in more quiet environments their output is very low, barely raising above the noise floor. This preamp solves this. Especially handy when I leave the hydrophones overnight with a Zoom F3 drop rig, a recorder where you can't really set the input level. The TritonAudio FetHead Phantom provides a clean and transparent gain and I can hear the signal from the gladys much more clearly, and I have less work in post. These preamps have been on some rather rought and adventurous trips, but they handle that without any problem. I also love the very small formfactor, which is very handy in field recording. I did subtract one point since the logo of one of them came off, but that didn't influence the sound.
Käyttö
Ominaisuudet
Ääni
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
M
Amazing
MB202 18.12.2020
For this price you get a a lot of extra gain with no loss of audio quality (somehow, I get only 15Db, but OK). Very useful to pump up any signal. More importantly, it makes your mics sound better as you don't have to crank up the pre (better to find that the "sweet spot"). Highly commendable.
Käyttö
Ominaisuudet
Ääni
Työnjälki
6
0
Raportoi ongelmasta

Raportoi ongelmasta