Harley Benton GW-Lock

After installing it the stand is great. It holds the guitars well and it closes well when you put the guitar on.
I have 2. One is for my Explorer type guitar (asymetrical head) and the other for a strat copy (asymetrical head). It works well for both guitars. Someone complained that its not good for heads that are not symetrical at the joint. Works well for me. The guitars are held very good.

Now
The stands come without screws and wall adapters. This wouldn't be such a problem if you could use normal size wall screws (wall plug of 6mm(width)x30mm) or 5mmX30mm. Screw length has to be longer than 40mm and it has to be 3mm fi or max 3,5mm fi.
The plastic on the stand where the screw fits through is very deep and you have to find a screw long enough it will get through the plastic and into the wall. Also the hole in the stand is very small so the screw needs to be 3mm or max 3,5mm wide. So you need a long and thin screw.
I finally found a screw that fits after visiting hardware stores.
Horrible experience and waste of money for gas.