These days, new microphones almost always have their roots in the Far East - or so it seems ... drum roll: Please welcome European microphone makers JZ Microphones!
The European company was established 2007 in Riga, the Latvian capital. Founder and mastermind Juris Zarins has developed a host of successful microphones for other companies prior to setting up JZ - including work for Blue Microphones.
Quality and innovation are the company's driving force: All microphones are developed and hand-built in Latvia. Only the best components are being used for these sonic performance machines. JZ don't simply copy existing vintage designs, they develop their products from the ground up - from capsule to electronics. This results in unique products with distinct character.
If you are looking for awesome looking, excellent mics - look no further. And as we handle the distribution now, we can offer these handmade sonic-magic-bullets at extremely reasonable prices to you.
If you have any questions regarding JZ or their products, please don't hesitate to call our studio department - our guys will be happy to give you sound advice on picking the right model! Prepare to be thrilled about these fine mics - and enjoy 3 Years of Thomann Warranty and our 30-Day Money-Back-Guarantee.
Hot Deals:
 |
|
JZ Microphones Vintage 47, Condenser Microphone, Transducer type: electrostatic, Operating principal: pressure gradient, Diaphragms active diameter: 25 mm, Frequency range: 20 Hz to 20 kHz, Polar pattern: cardioid, Output impedance: 50 ohms, Rated load impedance: 1000 ohms, Suggested load impedance: > 500 ohms, Sensitivity at 1000 Hz into 1000 ohms load: 22 mV/Pa, S/N Ratio CCIR 468-3 weighted: 76 dB, S/N Ratio DIN/IEC 651 A-weighted: 87 db-A, Equivalent noise level DIN/IEC A-weighted: 6 dB-A, Maximum SPL for 0.5% THD at 1000 ohm load: 134 dB, Dynamic range of the microphone preamplifier: 128 db, Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V), Current consumption: < 2 mA, Output connector: 3-pin XLR male, gold plated contacts, Signal polarity: positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3 [info]
|
|
EUR |
|
 |
|
JZ Microphones Vintage 67, Condenser Microphone, Transducer type: electrostatic, Operating principal: pressure gradient, Diaphragms active diameter: 25 mm, Frequency range: 20 Hz to 20 kHz, Polar pattern: cardioid, Output impedance: 50 ohms, Rated load impedance: 1000 ohms, Suggested load impedance: > 500 ohms, Sensitivity at 1000 Hz into 1000 ohms load: 22 mV/Pa, S/N Ratio CCIR 468-3 weighted: 76 dB, S/N Ratio DIN/IEC 651 A-weighted: 87 db-A, Equivalent noise level DIN/IEC A-weighted: 6 dB-A, Maximum SPL for 0.5% THD at 1000 ohm load: 134 dB, Dynamic range of the microphone preamplifier: 128 db, Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V), Current consumption: 2 mA, Output connector: 3-pin XLR male, gold plated contacts, Signal polarity: positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3 [info]
|
|
EUR |
|
 |
|
JZ Microphones BH1, Condenser Microphone, Transducer type: electrostatic, Operating principal: pressure gradient, Diaphragms active diameter: 2 x 27 mm, Frequency range: 20 Hz to 20 kHz, Polar pattern: Omni / Cardioid / Figure - 8, Output impedance: 50 ohms, Rated load impedance: >250 ohms, Suggested load impedance: 1000 ohms, Sensitivity at 1000 Hz into 1000 ohms load: 18 mV/Pa, S/N Ratio CCIR 468-3 weighted: 75,5 dB, S/N Ratio DIN/IEC 651 A-weighted: 86,5 db-A, Equivalent noise level DIN/IEC A-weighted: 7,5 dB-A, Maximum SPL for 0.5% THD at 1000 ohm load: 134,5 dB, Dynamic range of the microphone preamplifier: 127 db, Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V, Current consumption: 1,5 mA, Output connector: 3-pin XLR male, gold plated contacts, Signal polarity: positive toward pressure on a frontal diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3, Dimensions: 203 x 51 x 28 mm [info]
|
|
EUR |
|
 |
|
JZ Microphones BH1S, Condenser Microphone, Transducer type: electrostatic, Operating principal: pressure gradient, Diaphragms active diameter: 2 x 27 mm, Frequency range: 20 Hz to 20 kHz, Polar pattern: Omni / Cardioid / Figure - 8, Pad switch: -20db/-10db, Output impedance: 50 ohms, Rated load impedance: >250 ohms, Suggested load impedance: 1000 ohms, Sensitivity at 1000 Hz into 1000 ohms load: 18 mV/Pa, S/N Ratio CCIR 468-3 weighted: 75,5 dB, S/N Ratio DIN/IEC 651 A-weighted: 86,5 db-A, Equivalent noise level DIN/IEC A-weighted: 7,5 dB-A, Maximum SPL for 0.5% THD at 1000 ohm load: 134,5 dB, Dynamic range of the microphone preamplifier: 127 db, Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V, Current consumption: 1,5 mA, Output connector: 3-pin XLR male, gold plated contacts, Signal polarity: positive toward pressure on a frontal diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3, Dimensions: 203 x 51 x 28 mm [info]
|
|
EUR |
|
 |
|
JZ Microphones BH2, Condenser Microphone, Transducer type: electrostatic, Operating principal: pressure gradient, Diaphragms active diameter: 27 mm, Frequency range: 20 Hz to 20 kHz, Polar pattern: Cardioid, Output impedance: 50 ohms, Rated load impedance: >100 ohms, Suggested load impedance: >250 ohms, Sensitivity at 1000 Hz into 1000 ohms load: 21 mV/Pa, S/N Ratio CCIR 468-3 weighted: 76,5 dB, S/N Ratio DIN/IEC 651 A-weighted: 87,5 db-A, Equivalent noise level DIN/IEC A-weighted: 6,5 dB-A, Maximum SPL for 0.5% THD at 1000 ohm load: 134,5 dB, Dynamic range of the microphone preamplifier: 128 db, Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V, Current consumption: 1,5 mA, Output connector: 3-pin XLR male, gold plated contacts, Signal polarity: positive toward pressure on a frontal diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3, Dimensions: 203 x 51 x 28 [info]
|
|
EUR |
|
 |
|
JZ Microphones BH3, Condenser Microphone, Transducer type: electrostatic, Operating principal: pressure gradient, Diaphragms active diameter: 27 mm, Frequency range: 20 Hz to 20 kHz, Polar pattern: Cardioid, Output impedance: 50 ohms, Rated load impedance: >100 ohms, Suggested load impedance: >250 ohms, Sensitivity at 1000 Hz into 1000 ohms load: 21 mV/Pa, S/N Ratio CCIR 468-3 weighted: 76,5 dB, S/N Ratio DIN/IEC 651 A-weighted: 87,5 db-A, Equivalent noise level DIN/IEC A-weighted: 6,5 dB-A, Maximum SPL for 0.5% THD at 1000 ohm load: 134,5 dB, Dynamic range of the microphone preamplifier: 128 db, Pad: -5dB / -10dB, Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V, Current consumption: 1,5 mA, Output connector: 3-pin XLR male, gold plated contacts, Signal polarity: positive toward pressure on a frontal diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3, Dimensions: 203 x 51 x 28 [info]
|
|
EUR |
|
 |
|
JZ Microphones BH-SPK - accessories kit for JZ BH series, includes elastic shockmount and revolutionary pop filter with a curved cone-shape grille to reduce blasts and blows. [info]
|
|
EUR |
|
 |
|
JZ Microphones BT-201/1, small diaphragm Condenser Microphone, Transducer type: electrostatic, Operating principal: pressure gradient, Diaphragms active diameter: 13 mm, Frequency range: 20 Hz to 20 kHz, Polar pattern: cardioid, Output impedance: 50 ohms, Rated load impedance: 1000 ohms, Suggested load impedance: >250 ohms, Sensitivity at 1000 Hz into 1000 ohms load: 11 mV/Pa, S/N Ratio CCIR 468-3 weighted: 71 dB, S/N Ratio DIN/IEC 651 A-weighted: 82 db-A, Equivalent noise level DIN/IEC A-weighted: 12 dB-A, Maximum SPL for 0.5% THD at 1000 ohm load: 140 dB, Dynamic range of the microphone preamplifier: 128 db, Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V), Current consumption: < 2 mA, Output connector: 3-pin XLR male, gold plated contacts, Signal polarity: positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2relatively to pin #3, Dimensions: 161,5 lenght x 24 mm diameter, weight together with magneticly attached head: 140 g [info]
|
|
EUR |
|
 |
|
JZ Microphones BT-201/1S Matched Pair, 2 small diaphragm Condenser Microphone, Transducer type: electrostatic, Operating principal: pressure gradient, Diaphragms active diameter: 13 mm, Frequency range: 20 Hz to 20 kHz, Polar pattern: cardioid, Output impedance: 50 ohms, Rated load impedance: 1000 ohms, Suggested load impedance: >250 ohms, Sensitivity at 1000 Hz into 1000 ohms load: 11 mV/Pa, S/N Ratio CCIR 468-3 weighted: 71 dB, S/N Ratio DIN/IEC 651 A-weighted: 82 db-A, Equivalent noise level DIN/IEC A-weighted: 12 dB-A, Maximum SPL for 0.5% THD at 1000 Ohms load: 140 dB, Dynamic range of the microphone preamplifier: 128 db, Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V), Current consumption: < 2 mA, Output connector: 3-pin XLR male, gold plated contacts, Signal polarity: positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2relatively to pin #3, Dimensions: 161,5 lenght x 24 mm diameter, weight together with magneticly attached head: 140 g [info]
|
|
EUR |
|
 |
|
JZ Microphones BT-201/3 Small Diaphragm Condenser Microphone - electrostatic pressure gradient, transducer, 13mm diaphragm, 20Hz-20kHz, omni/cardioid (-20dB), 50 Ohms output impedance, 1000 Ohms rated load impedance (>250 Ohms suggested), 11mV/Pa (1000Hz into 1000 Ohms), 71dB S/N ratio (CCIR 468-3 weighted), 82dB-A (DIN/IEC 651 A-weighted), 12dB-A equivalent noise level (DIN/IEC A-weighted), 140dB max SPL (0.5% THD at 1000 Ohms), 128dB preamp dynamic range. Requires +48V phantom power (+/-4V) on XLR pins 2 & 3 (current consumption: < 2 mA), gold plated contacts. Dimensions: 161.5 x 24mm diameter. Weight together with magnetically attached head: 140g [info]
|
|
EUR |
|
 |
|
JZ Microphones BT-201/3S Matched Pair - 2 small diaphragm Condenser Microphone, Transducer type: electrostatic, Operating principal: pressure gradient, Diaphragms active diameter: 13 mm, Frequency range: 20 Hz to 20 kHz, Polar pattern: Omni, Cardioid, Cardioid -20dB, Output impedance: 50 ohms, Rated load impedance: 1000 ohms, Suggested load impedance: >250 ohms, Sensitivity at 1000 Hz into 1000 ohms load: 11 mV/Pa, S/N Ratio CCIR 468-3 weighted: 71 dB, S/N Ratio DIN/IEC 651 A-weighted: 82 db-A, Equivalent noise level DIN/IEC A-weighted: 12 dB-A, Maximum SPL for 0.5% THD at 1000 Ohms load: 140 dB, Dynamic range of the microphone preamplifier: 128 db, Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V), Current consumption: < 2 mA, Output connector: 3-pin XLR male, gold plated contacts, Signal polarity: positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2relatively to pin #3, Dimensions: 161,5 lenght x 24 mm diameter, weight together with magneticly attached head: 140 g [info]
|
|
EUR |
|
 |
|
JZ Microphones BT-301, Mid-Size Condenser Microphone, Transducer type:electrostatic condenser, Operating principal: pressure gradient, Diaphragms active diameter: 21mm, Frequency range: 20 Hz to 20 kHz, Polar pattern: Cardioid, Output impedance: 50 ohms, Rated load impedance: 1000 ohms, Suggested load impedance: >500 ohms, Sensitivity at 1000 Hz into 1000 ohms load: 33mV/Pa, S/N Ratio CCIR 468-3 weighted: 76 dB, S/N Ratio DIN/IEC 651 A-weighted: 87 db-A, Equivalent noise level DIN/IEC A-weighted: 5,5 dB-A, Maximum SPL for 0.5% THD at 1000 ohm load: 133,5 dB, Dynamic range of the microphone preamplifier: 128 db, Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V), Current consumption: < 2 mA, Output connector: 3-pin XLR male, gold plated contacts, Signal polarity: positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3 [info]
|
|
EUR |
|
 |
|
JZ Microphones JZ-PF, universal pop filter for use with any microphone. specific industrial design keeps the frequencies unaffected. The compact shape and unique waveform of the mesh reduces unwanted reverberations, and kills the pops and blows effectively. 45 cm long gooseneck for easy positioning and ergonomic attachment to attach the pop filter to a mic stand fast and easily. [info]
|
|
EUR |
|
 |
|
JZ Microphones JZI-7, shock-mount for JZ BT201 and BT301 series microphones, recommended for any pencil type microphone which has similar thickness (24mm) [info]
|
|
EUR |
|
|
|
New in our Hot Deals Hall of Fame
Get Your Free Copy of our Hot Deals Catalogue!
Your Feedback
Help us to adapt our website to suit your needs!
How do you rate this page?
|
|
