Doepfer A-149-2

14

Eurorack module

  • Expansion module for the A-149-1 (Article Nr: 199098)
  • Supplies 8 digital, random voltages
  • Eurorack format
  • Width: 4 HP
  • Depth: 35 mm
  • Power requirement: +40 mA (+ 12V) / -10 mA (-12V)

Note: Must be mounted directly to the left or right of the A-149-1, as an internal connection must be established between both modules. Can not be operated without the A-149-1!

Tillgänglig sedan December 2006
Artikelnummer 199100
försäljningsenhet 1 Styck
Width 4 TE / HP
699 kr
inklusive moms, 99 kr frakt tillkommer
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
Leverans beräknas mellan Måndag, 6.05. och Tisdag, 7.05.
1

14 Kundbetyg

5 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

drift

funktioner

ljud

hantverkskvalitet

5 Recensioner

M
Add some randomness to your rig
Monkeproggs 18.11.2020
This module sends gate/trigger signals at random when connected to Doepfer A-149-1. You feed the A-149-1 with a clock and this module spits out random gates/triggers each clock advance.
" It makes available 8 digital random
voltages (i.e. only low/high states like a gate signal)."
This module doesn't send out any random voltages, it sent out 10V on random outputs.
But it is very useful for triggering gates/filters/notes at random. I use it often to trigger the gates in my Behringer Multiple/gate Switch, thereby allowing modulation through at random. I also use it with a Logic circuit to decrease the probability of a output going high. For instance I have one output from this connected to an AND gate and another from my clock divider 1/13 output to the same AND gate. This example would giva a probability of an event happening 1/13+1/X.
The randomness of the outputs are fairly even and sometimes if feels like it is running through a chain, but for the most part it does the job.
I'm very pleased with this module and would higly recomend it to anyone interested in Generative systems or daring explorers.

The only downside is that it seems that all outputs are more prone to turning high than low so if you just use this as a trigger it will be firing a lot. So perhaps buy a logic module as well.
drift
funktioner
ljud
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
J
Doepfer random voltage extender module.
Jonathan64 11.09.2013
This module cannot be used on it's own, but rather is intended to provide additional facilities for the A-149.1 which generates random voltages (which can be quantised). It provides eight digital outputs each of which switches at random but synchronised to the clock input of the A-149.1. I have found it useful for generating random "note on" and "note off" signals when creating random self-generating musical sequences (Stochastic music). Used in combination with a logic module A-166 a useful range of signals can be generated at different time intervals to make the music more interesting to the ear, rather than all the notes being the same length. There are numerous other uses for randomly generated logic signals in a modular system apart from triggering envelope generators.
1
0
Anmäl recension

Anmäl recension

google translate de
Tyvärr uppstod ett fel. försök igen senare.
Ta
auch gut
T. aus H. 06.06.2016
als Ergänzung zu A-149-1. Die Ausgänge sind Gates und werden durch den Clockinput des A-149-1 angetrieben.
Sehr brauchbar, um damit z.B. 8 Sequencer eines Z8000 anzutreiben.
Die Gates bleiben 'oben', solange sie an sind. Falls man damit zufällig Noten triggern möchte, könnte man das mit einem A-162 dahinter bewerkstelligen.
drift
funktioner
ljud
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension