Doepfer A-149-1 quantized/stored random.CV
1–2 of 5 feedback textLäs alla recensioner
buchla style voltages
ett plus får dessutom 149-1 för att man kan cv-styra "n" och "d" mängden i deras respektiva outputs. riktigt fint!
den undre sektionen kan dessutom med fördel användas som en slags random sample and hold!
It is two units in one. The first, Quantised Random Voltages, can generate random octave or semitone ranges. Each of these is available from its own output. You can select the range of these manually, and then extend that using control voltage.
The second, Stored Random Voltages, generates 256 pitches (I think quarter tones). Again there are two outputs here. The first gives you a fixed even probability distribution of note pitch and is not alterable. The second lets you manually concentrate the probability either side of the mid-point. So you could have far more low notes, far more high notes, or (with the control in the middle) even probability across the range of notes generated.
The Fixed probability output is not CV controllable, while the variable probability output is.
The A-149-1 has a partner unit, the A-149-2. This generates 8 random gate signals, and could be used to trigger sequences, envelopes, or anything else which responds to a gate signal at its input.
While I find the A-149 very useful units own, I am planning to purchase an A-156 (again from Thomann!). This is a scale quantiser, which has two separate sections. The first section can take voltage on its input and output semitones. So for instance, a slow LFO sweep could be transformed into into a range of distinct notes that rise and fall with the LFO speed. The second section constrains input voltages in different ways. You can restrict notes to play arpeggios based on specific chords, or a particular key. This second option is controllable with CV.
The A-156 seems a natural partner to the A-149, and will extend the A-149's potential even further.
Doepfer A-149-1 quantized/stored random.CV
Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillator. The A-110-1 produces frequencies in a range of about 8 octaves, of which four waveforms are available...
Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...
ADSR Envelope Generator The module A-140 is a envelope generator and since it delivers control voltages, belongs to the modulation-modules. As soon as the ADSR is triggered at gate-input, it...
Module Dual linear/exponential, VCA
Doepfer A-111-2; High End VCO II / VCLFO; Width: 14 HP, Current: +70mA (+12V) / -50mA (-12V)
Wasp Filter Special edition, Black front, Yellow knobs
Doepfer A-199 Spring Reverb Module - electronically simulated by means of 3 spiral springs. Spring reverb systems have a very characteristic sound that is based on the (insufficient) mechanical...
Mixer ModuleModule A-138 is a four-channel mixer that can be used for mixing control voltages as well as for mixing audio signals. A separate attenuator is available for each of the four inputs. In...
External Input / Envelope FollowerModule A-119 is used to integrate external audio signals into the system A-100, and includes the components pre-amplifiers, envelope follower and a comparator. The...
Doepfer A-180-3 Dual Buffered Multiples, dual buffered 1-in-3 multiple to copying/buffering of control and audio signals, Width: 4 TE / 4HP / 20.0 mm
Quad ADSRThe module contains 4 independent ADSR envelope generators. Each sub-module has the controls Attack, Decay, Sustain and Release. With the 3-stage range switch, the desired time range can be...
Voltage Controlled Delayed Low Frequency Oscillator Module consists of a voltage-controlled low frequency oscillator (LFO) and a voltage controlled amplifier (VCA), Switchable to Polarizer / Ring...
LFO Modulation Generator The module A-145 (LFO) is a low frequency oscillator, which generates periodic control signals in a wide frequency range. Five wave forms are available: saw tooth, inverted...
Noise/Random Voltage Generator Module A-118 is a noise and random voltage generator. It produces the following signals: white noise, coloured noise, and random voltage. White and coloured noise can...
Frequency divider For clock/trigger/gate signals, Width: 4 TE/ 4 HP / 20 mm
Doepfer A-135-1 QVCA / VC Mixer, Quad Linear VCA / Voltage Controlled Mixer, Inputs: 4 x Signal in, 4 x CV In, Output: Signal Out, 4 x Single Out, Dimensions: 18 TE / 18 HP / 90.3 mm (Width) x 45 mm...
Filter 12 dB Multi-mode filter, in which the circuit of the SEM module is used, Width: 8HP 40.3 mm, Depth: 55 mm (measured from the rear of the front panel), Power requirements: +30 MA (+ 12V) /...
Analog and Trigger Sequencer for Modular System A-100 The following functions are available for the two analog rows (rotary knobs): 8 Rotary potentiometers, Scale (stepless knob) on the lower...
Wasp Filter Module A-124 is a special 12 dB multimode filter using the "strange" filter circuit of the "EDP Wasp" (an analog synthesizer with black/yellow case built end of the seventies,...
Quad Sequential Switch
Priset i SEK är ungefärligt.
SEK price – guideline price only
|Tillgänglig sedan||december 2006|
|i denna kategori||Rank 267|
|på thomann.de||Rank 48337|