Roadworx 4120B

27

Keyboard Stand

  • For 4 keyboards
  • 4 Support levels freely adjustable in height and inclination
  • With hand wheels
  • Interior width: 120 cm
  • Holder length: 69.5 cm (level 1), 45 cm (levels 2, 3 and 4)
  • Max. load capacity: 10 kg
  • Max. load capacity on lowest level: 35 kg
  • Total height: 139 cm
  • Weight: 16 kg
  • Colour: Black
Produkt dostępny od Luty 2023
Numer artykułu 547968
Jednostka sprzedaży 1 szt.
Keyboard Supports 4
Dostępny B-Stock od 499 zł
555 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Czwartek, 9.05. and Piątek, 10.05.
1

27 Oceny klientów

4.5 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

stabilność

montaż

wykończenie

20 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
C
Great
Cadian 17.11.2023
Very sturdy stand lots of space for synths, only issue is the brackets that come with it cannot be taken off without dismantling. However the jaspers brackets fit perfectly and they can be put on without disassembling. I found it easy to build but the instructions could be much better. For the price point definitely 5 stars
stabilność
wykończenie
montaż
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
l
Excellent
lhckr 28.02.2023
This stand is a godsend for the price and the quality construction, fairly easy to mount and very stable at full load. It finally consolidated my setup in one place.
stabilność
wykończenie
montaż
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
Not stable at all. Very little adjustment.
Martin9392 08.01.2024
Complex to set up and has a tendency to rotate under the slightest pressure. I have a M Audio Keystation 88 which barely fits widthways. A Korg Krome a Roland Gaia and a Modal Cobalt8X. The latter is relatively heavy and has a curved front to the underside. The only way possible to keeep this on the Roadworx 4120B is to put velcro strips on the supports and under the keyboard. otherwise it slips off immediately. That in itself is more of an issue with the Modal but this stand won't hold it without assistance.

Secondly I can put this on and tighten the 4 wheels for this row. (2 on the bar and 2 on the supports) as tight as I can and I have strong hands and in 10 minutes the Modal will be pointing downwards. The poles and supports may be strong in themselves but the brackets are next to useless.

Finally you cannot set this and reach synth controls. One of the sets of support is much longer. however 80% of that length goes back behind the pole. In fact the front part of this pair of supports is shorter than the others. Unfortunately you have to use this on the bottom rung as it is too deep to go anywhere else unless you want two metal rods sticking into your wall.

I found a half solution and that was to invert the long poles so they stick a long way forward and use velcro to hold on my keystation. Its not a deep keyboard but just too wide to fit between the poles on the normal brackets. The downside to this is with all the weight forward - the inadequate brackets let it constantly tilt forward especially if I play above pianissimo.

If you have a selection of small light keyboards - this would do the job (maybe). if you have anything substantial - look elsewhere.
stabilność
wykończenie
montaż
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
S
Ja, aber ...
Stoffi 12.05.2023
Grundsätzlich ist das Produkt in Ordnung. Ist es "einmal" zusammengeschraubt, steht es wirklich bocksteif da. Sehr stabil. Der Zusammenbau gestaltet sich allerdings nicht ganz einfach, da die "Anleitung" nur ein paar Zeichnungen und Detailansichten enthält, sich aber über die Reihenfolge des Zusammenbaus ausschweigt. Also hat man gleich eine Denksportaufgabe mitgekauft. Besonders mühsam ist dabei, dass die Verwendung der beiliegenden Schrauben nicht bezeichnet ist. Die von anderen Käufern geschätzten 2 Stunden für den Aufbau halte ich für eine gute Schätzung.
Das "aber" bezieht sich auf die Abstände und die Keyboardaufleger. Diese können nur in der Neigung und horizontal verstellt werden. Ein Verschieben in der Tiefe ist nicht möglich. Die Keyboards stehen dann zwar so, dass man die Tasten erreicht, aber nicht die Schalter, Regler und Pots eines analogen Synths. Ich wollte einen Prophet 5 auf der untersten Ebene verstauen. Das ist an sich kein Problem. Es gibt aber keine Möglichkeit sinnvoll an die Regler heranzukommen. Mit Herumschrauben ist es dann eher aus.
Daher muss ich leider (zum ersten Mal!) was zurückschicken.
stabilność
wykończenie
montaż
5
1
Zgłoś nadużycie

Zgłoś nadużycie