Tovább az oldal tartalmához

Flightcase for Controller

  • For Behringer x-Touch
  • Material: 7 mm phenolic resin-coated Multiplex
  • Aluminium edge: 25 x 25 mm
  • Foam padding in the lower and upper part
  • With slide-out tray for notebook
  • Space for cables inside
  • Device can be operated in the case
  • Two spring-loaded butterfly latches
  • One high-quality case handle made of artificial leather
  • Cable duct approx. 10 cm
  • Eight rounded steel ball corners
  • Four rubber feet
  • Exterior dimensions (W x D x H): 57 x 49 x 20 cm
  • Weight: Approx. 9.1 kg
  • Weight with x-touch: Approx. 13.6 kg
  • Made in Germany
  • katalógusunkba bekerült: Június 2016
  • Termékszám 389371
  • mennyiségi egység 1 darab
  • made for Behringer
  • Type Case
  • Material 7 mm Plywood
  • Wheels No
  • Dockhouse No
  • Colour Brown/Alu
  • Weight 9,1 kg
  • External Width 570 mm
  • External Depth 490 mm
  • External Height 200 mm
103 500 ft
Minden ár ÁFÁ-val
Azonnal szállítható
Azonnal szállítható

A termék raktáron van és azonnal szállítható

Szállítással kapcsolatos tájékoztató
1

36 Ügyfelek értékelései

4.8 / 5

A termékek értékeléséhez kérjük, jelentkezz be.

Megjegyzés: Mivel szeretnénk megakadályozni, hogy az értékelések szóbeszéden, hiányos ismereteken alapuljanak, vagy rejtett reklámok legyenek, csak valós ügyfeleink számára tesszük lehetővé értékelések írását, akik valóban tőlünk vásárolták meg a terméket.

A bejelentkezést követően az ügyfélközpontban, a "Termékek értékelése" menüpont alatt megtalálsz minden terméket, amelyet lehetőséged van értékelni.

stabilitás

kezelhetőség

kivitelezés

25 Vélemények

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
S
Rock solid
Simonwindisch 12.07.2018
Heavy, solid, the XTouch is a perfect, snug fit. There is also enough room behind the XTouch to store cables.
The handle is comfy, but doesn't fold down, so it doesn't stack as well when you're loading up the car.
Plenty of room on the slidy shelf that goes above the X-Touch for a big laptop. Would be good if it had a clip for the power cable that disappears down the back if you take the laptop away, but that would probably be asking for too much! There isn't enough room inside the closed box for the laptop though, that would have to be stored separately.
It's extremely strong and would protect the contents from most impacts.
stabilitás
kezelhetőség
kivitelezés
5
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
M
GREAT UNIT
MIKEDEE 30.06.2021
BUILT TOUGH TO PROTECT X TOUCH, CONVENIENT WAY TO HAVE LAPTOP AND X TOUCH VISIBLE AND USEABLE
stabilitás
kezelhetőség
kivitelezés
0
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
D
Fantastic Case, Great Price
DJUnreal 23.08.2022
I bought this for my X-Touch, as I sometimes need to travel with it. It fits perfectly - snug enough to stop it sliding around, but not overly tight. The laptop shelf slides out far enough to give full access to the controller if you use it inside the case, and there's room to pack a couple of ethernet cables in the back along with the power cable for transport - very important if you're trying to make sure you don't forget those vital cables! The construction is excellent, very solid, and it feels like it will handle plenty of abuse without any problems at all.
stabilitás
kezelhetőség
kivitelezés
0
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
DS
So Glad Someone Makes This!
Dallas Sound Guys 17.02.2023
I needed secure protection for my Behringer XTouch and this is the perfect answer. Not only does it hold the XTouch snuggly but it has a sliding top which is ideal for a laptop. Anytime I post a video or photo with this in the background, someone asks where I got it. Thank you!
stabilitás
kezelhetőség
kivitelezés
0
0
Jelentem!

Jelentem!