Millenium RW-2001

19" Carriage with Rollers

  • Solid 12U construction with adjustable 8U bottom
  • Load bearing capacity up to 35 kg
  • Height: 120 - 140 cm
  • Width: 65 cm
  • Depth: 60 cm
  • Weight: 7.8 kg
  • Colour: Black

Note: Delivered unassembled.

Further Information

usable height in U 20 U
Material Steel
Wheels Yes

These are other customers' choices:

Customers who looked at this item have bought these:

Millenium RW-2001
46% bought this exact product
Millenium RW-2001
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
51 € Add to Basket
Millenium Rackstand 6U
8% bought Millenium Rackstand 6U 12,40 €
Millenium Rackstand 12U
7% bought Millenium Rackstand 12U 16,50 €
StudioRTA Producer Cart
5% bought StudioRTA Producer Cart 119 €
Millenium Steel Box 6
4% bought Millenium Steel Box 6 35 €
Our most popular 19'' Studio Racks
226 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.1 /5
  • stability
  • quality
Total
stability
quality
Awesome Rack
Kitapci, 02.10.2014
I use this to mount a Behringer Xenyx 2442fx (located in the top adjustable angle rack) with rack gear such as headphone amplifiers, gates, reverb, ect along the bottom rack. This comes with plenty of places to mount rack equipment and is especially useful if you have a lot of them. My band uses our own small set up for band rehearsal but being the drumming it was a bit awkward having the mixer in accessible reach to change any monitor mixes on the fly, luckily with this I was able to bring the mixer and the outboard gear much closer when at the drums and push it neatly away when band practice had finished.

I can also see this being very useful in a home studio set up that lacks a patch bay as it is much easier to move this around and get to the back of equipment than in a usual cabinet of rack equipment.

However there is an issue with this style rack, since its not a cabinet all of the cabling is on show so unless you have velcro cable ties it can look a bit messy and can often run over cables on the ground when moving around if you're not looking.
Another issue isn't with the product but rather with the manufacturer; it doesn't come with any instructions which does mean you have to figure it out as you go, but even with that it only took around 5-10 minutes to build.

Over all its a great product and very good price point.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
stability
quality
Great for the price; just update the assembly drawing!
Hogar, 31.10.2017
This is a fantastic product for this price!
The only thing is that the assembly drawing is confusing, and that they packed the wrong tool (1 inbus/hex tool was wrong size). The drawing shows that all 4 wheels have brake mechanism, when in fact only 2 have those (which is OK, but it does not help assembling). Also, the drawing shows that 6 of the screws are "butterfly" type, but they are NOT provided in the package (only plain inbus/hex screws). The product photos on Thomann site are true to the package.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
stability
quality
Disappointing purchase
Derek J., 12.11.2013
Screw holes in the top section of the rack were unevenly placed resulting in racks that were lopsided 0mm on the left and 4mm! on the right. One of the rack spaces was unusable. Had to experiment with the placement of my various rack units (1U, 2U, 3U) to get them into the rack. Very frustrating. I understand this is a cheaply priced unit. but misaligned screw holes is totally unacceptable. Minor observation - when assembled the using didn't sit flatly on the floor - one of the wheels had to be adjusted substantially to stop the unit rocking.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
stability
quality
Nice sturdy rack for the 'space conscious' studio
18.07.2016
Having not a huge area for use of a studio, I bought one of these to get as much racked as possible but also keeping it fairly 'mobile'.

I use this with a Yamaha MG166 mixer and separate 1U headphone amp fitted to the top tiltable section and underneath a very heavy power amp, tray and rack power supply.

It is very solidly built, nice smooth and lockable wheels to move it around on.

For a small studio, this is great and I succeeded in getting a majority if not all of the mess of cables off the floor or trailing between units and now all self contained on this rack stand. Due to it being not an enclosed frame, it still allows you to swivel round and change the cables with ease.

In a way I prefer this frame to the other designs where the lower rack is front mounted, as this rack allows me to sit in front of the tilted mixer, with the lower units set back far enough not to bash your knees against.

Just 2 star lost in quality as not all of the rack hole threads are as clean and well cut as they could have been, but overall very nice rack stand.

Highly recommended
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
51 €
Including VAT; Excluding 20 € shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-35
FAX: +49-9546-9223-24
Phone: +49-9546-9223-30
FAX: +49-9546-922328
Phone: +49-9546-9223-20
FAX: +49-9546-9223-24
Online Guides
Racks & Cases
Racks & Cases
If you take good care of your equipment, your pack it up carefully - and this means getting a proper case!
 
 
 
 
 
 
 
 
 
 
test results:
Offers include VAT and are valid as long as stocks last. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
(1)
Recently Viewed
Toontrack EZbass

Toontrack EZbass (ESD); virtual bass guitar; extensively produced bass software / plugin with 2 basses, based on samples of an Alembic 5-String bass and a 5-string Fender Jazz Bass; sub bass with two synthesized sine tones add both fullness and...

(4)
Recently Viewed
Behringer CAT

Analogue Synthesiser VCO 1 with 4 miscible waveforms (sawtooth, triangle, pulse and suboctave), Pulse width modulation and two adjustable modulation sources, VCO 2 with 3 mixable waveforms (sawtooth triangle and suboctave) and two adjustable modulation sources, Low pass filter...

Recently Viewed
Adam T8V

Adam T8V; Active Nearfield Monitor; 8" Woofer; 1.9" U-ART Accelerated Ribbon Tweeter; 2x Class-D Amp: 70 Watts RMS Woofer, 20 Watts RMS Tweeter; Frequency Range: 33 Hz - 25 kHz; Crossover Frequency: 2.6 kHz; max. SPL: 118 dB (1m /...

(3)
Recently Viewed
iZotope Music Maker's Bundle

iZotope Music Maker's Bundle (ESD); Plugin-Bundle; contains eight essential tools for audio editing and creative music production; consists of BreakTweaker Exp, Stutter Edit, Trash 2, Iris 2, Elements Suite (Nectar Elements, Neutron Elements, Ozone Elements und RX Elements); supported formats...

Recently Viewed
K&M 80310

K&M 80310 disinfectant stand with bracket; bottle holder dimensions: 102 x 91 mm; base diameter: 275 mm; drip cup can be removed for cleaning; with bracket to fix the disinfectant bottle ; round base; weight: 3,6 kg; colour: pure white;...

Recently Viewed
Rode Wireless GO White

Rode Wireless GO White; Digital Wireless Microphone System; ultra-compact and lightweight set of transmitter and receiver; series III 2.4 GHz digital transmission; clip-on transmitter TX with built-in microphone (omni capsule); maximum SPL: 100 dB; Frequency Range: 50 Hz – 20...

Recently Viewed
Rockstand RS 20866 6 E-Guitar Stand

Multi-Guitar Stand For up to 6 electric guitars and / or electric basses, The electric guitar holder can be turned to hold V-style guitars, Can be folded up and folded compactly, Dimensions when set-up (L x W x H):...

(1)
Recently Viewed
Presonus ioStation 24c

Audio Interface and Controller 2 x 2 USB 2.0 (USB C) recording interface with 24-bit / 192 kHz, 2 x Mic / Line / Instrument XLR combo input jacks, 2 x Line output 6.3 mm jack symmetrical, Stereo headphone...

Recently Viewed
Rode Lavalier GO White

Rode Lavalier GO White; Lavalier Microphone; pairs perfectly with Røde Wireless GO (item 463781); works with most other devices with a 3.5mm TRS microphone input; compatible with most laptops, DSLR cameras, mobile recorders etc.; broadcast grade omnidirectional condensor capsule; Frequency...

(1)
Recently Viewed
Mackie CR3-X

Multimedia Monitors Equipped with a 3" woofer and a 0.75" tweeter, Power: 50 W, Frequency range: 80 - 20,000 Hz (-3 dB), Housing: MDF, Power supply: 100 - 240 V AC, 50/60 Hz, Dimensions (W x H x D):...

(1)
Recently Viewed
Behringer Eurorack Go

Behringer Eurorack Go; Eurorack case; two rows with 140 HP each, build-in busboard with 32 headers for Eurorack modules;, vertical positioning possible via integrated tilt stand; 96 sliding nuts (M3) pre-installed; maximum module depth: 40mm (lower row), 62mm (upper row);...

(2)
Recently Viewed
Presonus Quantum 2626

Thunderbolt 3 Audio Interface 192 Sampling rate, 24-Bit resolution, 8 Microphone amplifiers with up to 60dB gain, 2 Combo input sockets (mic / instrument) and 6x mic / line inputs, 8 x 6.35 mm TRS line outputs, galvanically coupled,...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.