Millenium RW-2001

214 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.1 / 5.0
  • stability
  • quality
18 written ratings
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
Awesome Rack
Kitapci, 02.10.2014
I use this to mount a Behringer Xenyx 2442fx (located in the top adjustable angle rack) with rack gear such as headphone amplifiers, gates, reverb, ect along the bottom rack. This comes with plenty of places to mount rack equipment and is especially useful if you have a lot of them. My band uses our own small set up for band rehearsal but being the drumming it was a bit awkward having the mixer in accessible reach to change any monitor mixes on the fly, luckily with this I was able to bring the mixer and the outboard gear much closer when at the drums and push it neatly away when band practice had finished.

I can also see this being very useful in a home studio set up that lacks a patch bay as it is much easier to move this around and get to the back of equipment than in a usual cabinet of rack equipment.

However there is an issue with this style rack, since its not a cabinet all of the cabling is on show so unless you have velcro cable ties it can look a bit messy and can often run over cables on the ground when moving around if you're not looking.
Another issue isn't with the product but rather with the manufacturer; it doesn't come with any instructions which does mean you have to figure it out as you go, but even with that it only took around 5-10 minutes to build.

Over all its a great product and very good price point.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
Great for the price; just update the assembly drawing!
Hogar, 31.10.2017
This is a fantastic product for this price!
The only thing is that the assembly drawing is confusing, and that they packed the wrong tool (1 inbus/hex tool was wrong size). The drawing shows that all 4 wheels have brake mechanism, when in fact only 2 have those (which is OK, but it does not help assembling). Also, the drawing shows that 6 of the screws are "butterfly" type, but they are NOT provided in the package (only plain inbus/hex screws). The product photos on Thomann site are true to the package.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
Disappointing purchase
Derek J., 12.11.2013
Screw holes in the top section of the rack were unevenly placed resulting in racks that were lopsided 0mm on the left and 4mm! on the right. One of the rack spaces was unusable. Had to experiment with the placement of my various rack units (1U, 2U, 3U) to get them into the rack. Very frustrating. I understand this is a cheaply priced unit. but misaligned screw holes is totally unacceptable. Minor observation - when assembled the using didn't sit flatly on the floor - one of the wheels had to be adjusted substantially to stop the unit rocking.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
Nice sturdy rack for the 'space conscious' studio
18.07.2016
Having not a huge area for use of a studio, I bought one of these to get as much racked as possible but also keeping it fairly 'mobile'.

I use this with a Yamaha MG166 mixer and separate 1U headphone amp fitted to the top tiltable section and underneath a very heavy power amp, tray and rack power supply.

It is very solidly built, nice smooth and lockable wheels to move it around on.

For a small studio, this is great and I succeeded in getting a majority if not all of the mess of cables off the floor or trailing between units and now all self contained on this rack stand. Due to it being not an enclosed frame, it still allows you to swivel round and change the cables with ease.

In a way I prefer this frame to the other designs where the lower rack is front mounted, as this rack allows me to sit in front of the tilted mixer, with the lower units set back far enough not to bash your knees against.

Just 2 star lost in quality as not all of the rack hole threads are as clean and well cut as they could have been, but overall very nice rack stand.

Highly recommended
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
Cheap, robust, and perfect for my needs
niallgmac, 22.01.2015
I bought this to mount my mixer in a small home studio, and to mount some outbuard gear underneath. This fits the bill perfectly, and the wheels mean I can easily drag it arounf the room with me. Dies exactly what it says on the tin.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
Exactly as advertised
04.09.2016
The rack is exactly as advertised. It is sturdy enough for the task and easy to assemble. Manufacturing quality seems to be good. Better than you might expect for the (very reasonable) price. There are a couple of very minor points. The lower part of the rack (the none angled part) is a tight fit for my 19" shelf, and the supplied assembly instructions show "butterfly" type bolts for some of the connections although standard cap screws are provided. The pictures of the item on the actual web site show the normal cap screws though, so a VERY minor point. All in all I can recommend this product without reservation
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
Millenium RW-2001 - no screw thread at all.
ilm-nick, 14.11.2017
It was impossible to screw this rack trolley together, because in one hole is lack of screw thread. No feedback from thomann.de about this item till now. Only possible way to bring this stand together is screwing rack format instrument, original part instead, in lower space of Millenium RW-2001.
After some conversation, Thomann gave to me completely new rack, instead of the not usable part of previous rack. I did not expect this great attitude. This new rack is usable as required. Thank You very much to Thomann team.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
I've turned this into a workstation
Black Swan Studio, France, 02.01.2019
It houses my Akai sampler and, with a little innovative thinking, it now also holds a keyboard, a computer and various other odd items.

Very strong and stable.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
Cost effective rack unit - has some flaws
Moogieman, 14.07.2017
You can mount quite a lot of rack equipment in this so I've found it very useful in my home studio, where I'm not bothered about protecting the equipemt or too bothered about cabling etc.

However, some of the screw sockets are defective, or it was the bolts it came with that didn't fit properely and tapped into the threads, renedering them unusable. There are therefore a couple of U that I can't use unless I drill through the screw holes and then just use a nut to fasten the bolt - not ideal.

I've also found the frame containing the screw holes extends quite far into the space where the rack unit sits. Hence, a 6U, deep unit was incredibly difficult to mount as some screw heads sticking out of the body didn't clear the rack frame. I haven't had a problem before with this unit in flight cases etc.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
excellent addition to the (project) studio
samsmiles, 06.07.2018
This rolling rack has been an excellent addition to my project studio, allowing me to raise my mixer up to a height where it can be tweaked more like an instrument. I've had no problems with the rack-sizes or stability (naturally, fitting it with some gear helps with stability).


One odd thing; I found that one of the allen keys/wrenches supplied was the wrong size for the screws it came with (luckily I had the right size handy).

Overall, I think this is a great piece of equipment for the price.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
Great product
Duksos, 12.02.2019
Thanks a lot
For shipping this out to me it arrived perfectly
It?s great for my mixer
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
Strong and Sturdy Rack
The Dragon, 14.03.2018
Use:
I purchased this 19 inch rack to organise and store audio equipment in my studio.

Pros:
This product is strong and sturdy with up to 20U of space for equipment. It is portable with good quality castor wheels, which lock the unit in place. The angle of the top section can be adjusted which is a nice feature. Also it's easy to assemble.

Cons:
Couldn't find any complaints or faults.

Conclusions:
Great storage solution for 19 inch rack equipment. Great price for 20U worth of storage. Sturdy, functional and looks good in my studio.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
Good quality and design
Alexis S, 24.05.2015
It does not feel cheap or flimsy, is easy to assemble and use. The sizing of the lower rack was I think a little under because a drawer I bought separately did not fit, and other units fit barely. Overall, good item, would buy again.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
mixed emotions
21.06.2016
It works as intended and, for the price, it's quite sturdy. One major problem I've personally had is that many of my 19" instruments did not fit in it properly cos this rack is rather on the narrow side of things. I've had to unscrew the frame completely in order to rack up my gear and in some cases the gear just wont fit. Check your measurments cos even if 19" width is a standard for the brackets, the inside chassis of some gear might be too wide for this rack.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
Very good
William953, 27.05.2013
It is a very good rackmount stand/trolley and is easy to move on wheels and then great to have stationary as it has wheel locks, however it would be good if you could adjust the overal height of the frame up or down, overall an excellent buy for the price :) very happy with my purchase.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
Clever!
Alexios, 05.12.2013
A very smart choice for a home station, which helps keeping equipment and cable ware neat. Absolutely satisfied.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
Great for the price
neverwind, 27.07.2017
It's a great stand, easy to assemble and seems quite reliable. I've put a lot of stuff on it already and can't be more happy with it.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
gb Automatically translated (Show original)
gbOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
stability
quality
Great!
10.05.2015
I use the top of this to hold my eurorack mixer, and my axe-fx. The rack spacing is perfect for this and could fit one more 1u unit :) Will definitely buy another!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report

Millenium RW-2001

51 €
Including VAT; Excluding 20 € shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-35
FAX: +49-9546-9223-24
Phone: +49-9546-9223-30
FAX: +49-9546-922328
Phone: +49-9546-9223-20
FAX: +49-9546-9223-24
(1)
Recently Viewed
Rode Wireless GO

Rode Wireless GO; Digital Wireless Microphone System; ultra-compact and lightweight set of transmitter and receiver; series III 2.4 GHz digital transmission; clip-on transmitter TX with built-in microphone (omni capsule); maximum SPL: 100 dB; Frequency Range: 50 Hz – 20 kHz...

(1)
Recently Viewed
IK Multimedia UNO Drum

IK Multimedia UNO Drum; analog/PCM drum machine; 6 true analog voices for kick, snares, claps, and hi-hats; 12 PCM voices with 54 samples; freely layer analog & PCM sounds with 11-voice polyphony; editable drum sound parameters like level, tune, decay...

Recently Viewed
Native Instruments Komplete Audio 6 MK2

6-Channel Audio Interface 24-Bit / 192 kHz, 2 Mic/Line/Instrument Combo Inputs: XLR/jack 6.3 mm, 2 Line inputs: 6.3 mm Jack, 4 Line outputs: 6.3 mm Jack DC-coupled, S/PDIF input coaxial, MIDI input and output, 2 Stereo headphone outputs: 6.3...

(3)
Recently Viewed
TC Electronic Polytune 3 Noir

TC Electronic Polytune 3 Noir; Effects Pedal for Electric Guitar; compact polyphonic tuner/buffer, tuner in effectpedal size, Bonafide buffer circuitry preserves your tone through long cable runs and multiple effects, polyphonic tuning - tune all strings simultaneously, fast chromatic tuner...

Recently Viewed
K&M 21427

K&M 21427, professional carrying case for 6 microphone stands, includes castors for easy and comfortable transport, case made of extremely durable 1680D nylon fabric, all seams hand-stitched in high quality, padded carrying handles and a durable zipper, castors included, dimensions:...

Recently Viewed
RCF Art 312 MK III

RCF Art 312 MK III - full range passive speaker, 12"/1", 300W, 90x70° 12" woofer and 1" driver with 1.5" Mylar diaphragm, 8ohm, 127dB max, Speaker Twist in/out, plastic housing, pole mount adapter, 4 x M10-Flying points and 3 handles,...

(1)
Recently Viewed
Jazzlab saXholder PRO

Saxophone holder For Baritone, Tenor, Alto, and Soprano saxophones, Transfers the weight evenly across both shoulders, No load on the cervical vertebrae, Can be adjusted quickly with one hand, Space-saving: Smaller than a sheet of paper when folded, Comfortable...

(2)
Recently Viewed
Harley Benton Custom Line Thunder 99

Guitar Power Amplifier in Pedal Format Compact power amp pedal for electric guitar, For direct connection to any preamp, pedal or effects unit, Power: 2 x 50W to 4 ohms, For 4 - 16 ohm speakers, Master volume controller,...

Recently Viewed
J. Rockett Audio Designs The Dude V2

Effect pedal for electric guitar Overdrive, Delivers classic D-Style ODS sounds and feel, Less aggressive volume controller than previous version, True bypass, Controls for Level, Ratio, Treble and Deep, Bypass footswitch, Input / Output: 6.3mm mono jacks, Metal housing,...

Recently Viewed
K&M 21316 Select

K&M 21316 Select, large carrying case for speaker and hand crank stands, case made of extremely durable 1680D nylon fabric, all seams hand-stitched in high quality, padded carrying handles and a durable zipper, dimensions: 1200 mm, weight: 2,1kg, colour: black

Recently Viewed
Jazzlab saXholder PRO XL

Saxophone holder For Baritone, Tenor, Alto, and Soprano saxophones, Transfers the weight evenly across both shoulders, No load on the cervical vertebrae, Can be adjusted quickly with one hand, Space-saving: Smaller than a sheet of paper when folded, Comfortable...

(1)
Recently Viewed
the t.bone free2b

the t.bone free2b, microphone wireless system, 2.4 GHz wireless plug-on microphone system for dynamic mics, without phantom power, plug-n-play XLR transmitter & receiver, 2.4 GHz band, 32 bit / 48 kHz hi-resolution audio quality, 6 channels, transmission range up to...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.