Customer reviews about Harley Benton Parts Copper Shielding Tape

S

A bit stingy on the quantity!

Stephen662 08.06.2024

A quality thick tape that sticks very well to you guitar cavity and to itself, with conductive adhesive. I reccomend using a tool to flatten it down and eliminate creases and bubbles - do not be tempted to use your fingers! It is incredibly sharp and you will end up with lacerated finger tips - painful and not good for a guitarist!
Now my only complaint is the amount you get. There is not enough to do the cavity of a Strat... let alone the pickguard. You will need two rolls. I think Harley Benton should measure how much it takes to do the typical strat and add on another 0.5 meter for good luck. And then price accordingly. I know you can use 'garden slug tape' but it is rarely as thick as this or as sticky. So, it's a good product but too short on quantity.

3

1

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

s

Good tape, too expensive

sioux33 12.01.2025

The tape is ok, does the job well. A bit difficult to work with becase it is narrow. But it is too expensive. I used almost 3 rolls to shield the inside of my strat. For the pickguard too you would need about 6in total. You can buy these conductive glue tapes easily elsewhere. With 10-15 euros you can get a 10cm wide roll of some meters. Wouldn't buy again.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

TJ

It works but you don’t get a lot of it

Travis John 06.07.2023

The tape has conductive adhesive which is good but you barely get enough of it, there definitely wouldn’t be enough to do a strat or a jazzmaster so you’d probably be better off ordering 2.

2

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

G

Not enough tape

Gasitis 02.05.2024

You get a little amount of copper tape here. It's conductive and does the jobb really well, but there is not enough tape for one guitar, unless you intend to shield only the cavities, in which case it should be enough for a strat style guitar at least. If you want to shiled both the cavities and the pickguard, you're probably gonna need two of these.

3

1

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

UN

It's ok

Unique Nickname 28.01.2025

Tape is very thick and not that nice to work with, also the adhesive is only kinda conductive, if layers are not pushed together thight enough it won't work

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

CN

You need 2, for 1 Strat.

Chris Nikolis 12.08.2025

Less quantity than I needed. I was hoping that one of them would suffice for my Strat-style guitar. You definitely need 2 to get your job done, one’s not enough.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Harley Benton Parts Copper Shielding Tape

304 Customer ratings

You have to be logged in to rate products.

24 Reviews

Served with love!

Harley Benton Parts Copper Shielding Tape

304 Customer ratings

You have to be logged in to rate products.

24 Reviews