Doepfer A-160 Clock Divider
Clock DividerThe A-160 module is a frequency divider for digital clock signals (clock divider), in order to have lower frequencies (especially for the control of rhythmic sequences) in the system. The clock signal applied to the trigger input may be, e.g. From an LFO, from the MIDI SYNC, or from the MIDI CV Interface (Gate).
At the outputs, the clock signals (half clock frequency to 1/64 clock frequency) are available. The A-160 also has a reset input. If a reset signal is fed to this, all outputs are set to zero and held to zero as long as the level is high.
In particular, the Clock Divider can also be used in conjunction with the Clock Sequencer A-161 to provide periodic switching sequences with a length of 1 to max. 8.
The A-160 is also predestined to connect to the clock and reset output of the A-190 MIDI interface.