Doepfer A-100 LC1 Low Cost Case

Case for Eurorack Modules

  • Integrated power supply A-100SSB: +12 V / 380 mA, -12 V / 380 mA
  • 48 HP version of the A-100LC3
  • Built-in bus board with 8 module slots
  • Casing made of raw wood - subsequent painting possible by the user
  • Dimensions (W x D x H): 262 x 158 x 154 mm
  • Internal dimensions: 1x 48 HP x 3 RU
  • IEC socket on the back
  • Incl. Power cord

Further Information

System Eurorack
Width 48 TE / HP
Hight 3 U
Power Supply Yes
Formfactor Case

These are other customers' choices:

Customers who looked at this item have bought these:

Doepfer A-100 LC1 Low Cost Case
41% bought this exact product
Doepfer A-100 LC1 Low Cost Case
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
121 € Add to Basket
Doepfer A-100LC3 Low Cost Case
12% bought Doepfer A-100LC3 Low Cost Case 188 €
Doepfer A-100MC BK
8% bought Doepfer A-100MC BK 111 €
Doepfer A-100 LC6 Case 6HE PSU3
8% bought Doepfer A-100 LC6 Case 6HE PSU3 299 €
Tiptop Audio Happy Ending Kit Silver EU
5% bought Tiptop Audio Happy Ending Kit Silver EU 149 €
Our most popular Eurorack housings
8 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.4 / 5.0
  • features
  • quality
6 written ratings Read all reviews
Total
features
quality

Almost perfect, but really good for its price

Korkri, 14.06.2018
This is a really basic modular case, power is not huge but it's way enough for a case of that size.
Only two drawbacks:
-The modules get sometimes stuck as the space between the two rails is a little bit too big, but this not such a big problem.
- The PSU brick is attached on the right side of the case, in line with the AC cord connector. It is a bit a pity as it prevents the installation of deep modules on the right side. If they would have put the brick on the back inside next to the PCB it would have been perfect.
They also could have used shrouded header connector for the PSU for the careless ones that could connect their modules the wrong way but if you are used to it, it is not a big deal :D
I would buy that case again, only reason I'd see to separate with it would be to get a bigger one.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
features
quality

Great bang for buck small eurorack case

foetsie, 28.12.2018
Great value small case. Built sturdy with built in power supply, does the job but when using several more power consuming units maybe a little insufficient.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Doepfer A-100 LC1 Low Cost Case
(8)
Doepfer A-100 LC1 Low Cost Case
to the product
121 €

Case for Eurorack Modules Integrated power supply A-100SSB: +12 V / 380 mA, -12 V / 380 mA, 48 HP version of the A-100LC3, Built-in bus board with 8 module slots, Casing made of raw wood -...

  • System: Eurorack
  • Width: 48 TE / HP
  • Module: No
  • Hight: 3 U
  • Empty Rack, Or Housing: Yes
  • Power Supply: Yes
  • Basic System: No
  • Accessories: No
  • Power Supply Specifications: +12V/380 mA, -12V/380mA, +5V/100mA, +12V und +5V dürfen max 380mA betragen
  • Formfactor: Case
Doepfer A-138s Mini Stereo Mixer
(12)
Doepfer A-138s Mini Stereo Mixer

Mini Stereo Mixer 4-in-2 mix module in Eurorack format, Four inputs with attenuator and pan control, plus two 3.5 mm mini jack outputs, Width: 8 HP, Depth: 30 mm, Power requirements: +10 mA (+12 V)...

  • Modul Type: Stereo
  • Module: Yes
  • Width: 8 TE / HP
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-124 Wasp Filter SE
(37)
Doepfer A-124 Wasp Filter SE

Wasp Filter Special edition, Special 12 dB multimode filter, Circuit technology of the "EDP Wasp", Black front, Yellow pot caps, Width: 8 HP, Depth: 45 mm, Power requirements: +30 mA (+12 V)/-10 mA...

  • Width: 8 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-160-2 Clock Divider II
(14)
Doepfer A-160-2 Clock Divider II

Frequency divider For clock/trigger/gate signals, Width: 4 TE/ 4 HP / 20 mm

  • Width: 4 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-180-2 Multiples
(66)
Doepfer A-180-2 Multiples

Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width:...

  • Width: 2 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-119
(39)
Doepfer A-119

External Input / Envelope FollowerModule A-119 is used to integrate external audio signals into the system A-100, and includes the components pre-amplifiers, envelope follower and a comparator. The...

  • Width: 8 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-198 (Module + Manual)
(4)
Doepfer A-198 (Module + Manual)
to the product
211 €

Trautonium Controller Consists of Doepfer A-198 Module and Ribbon Controller, Ribbon Controller: Generates a control voltage for the pitch of the oscillators by touching the position sensor,...

  • Width: 8 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-180-3 Dual Buffered Multiple
(13)
Doepfer A-180-3 Dual Buffered Multiple

Synthesizer module Double buffered 1-in-3 multiple, For buffering and duplication of CV and audio signals, Width: 4 TE / 4HP / 20.0 mm

  • Width: 4 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-140
(56)
Doepfer A-140

ADSR Envelope Generator The module A-140 is a envelope generator and since it delivers control voltages, belongs to the modulation-modules. As soon as the ADSR is triggered at gate-input, it...

  • Width: 8 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-118 Noise/Random
(48)
Doepfer A-118 Noise/Random

Noise/Random Voltage Generator Module A-118 is a noise and random voltage generator. It produces the following signals: white noise, coloured noise, and random voltage. White and coloured noise can...

  • Width: 8 TE / HE
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
Doepfer A-110-1
(64)
Doepfer A-110-1
to the product
139 €

Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillator. The A-110-1 produces frequencies in a range of about 8 octaves, of which four waveforms are available...

  • Analog: Yes
  • Digital: No
  • Module: Yes
  • Width: 10 TE / HP
  • Empty Rack, Or Housing: No
  • variants: Doepfer
  • Basic System: No
  • Accessories: No
Doepfer A-148 Dual Sample And Hold
(32)
Doepfer A-148 Dual Sample And Hold

Euro Rack Module Dual Sample & Hold, Two separate sample/hold circuits, Euro rack format, Power requirements: +20 mA (+12V) / -20 mA (-12V), Width: 4 HP / 20.0 mm, Depth: 30 mm (measured from the...

  • Width: 4 TE / HP
  • Module: Yes
  • Empty Rack, Or Housing: No
  • Basic System: No
  • Accessories: No
121 €
Incl. VAT; plus 20 € shipping
Free shipping over 298 €
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
Offers include 24% Greek VAT and are valid as long as stocks last. Shipping costs to Greece are 20 EUR, free shipping on orders above 298 EUR. Please click here for international Shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
Recently Viewed
Rode Rodecaster Pro

Rode Rodecaster Pro; Podcast Production Studio; designed for podcasts; 4 x XLR microphone inputs with 48V phantom power; 8 programmable sound effects pads for jingles and FX; instant mix minus for phone or app calls; 3.5mm TRRS cable, USB and...

to the product
655 €
Recently Viewed
Millenium SD-120 B StudioDesk

Recording Workstation Compact work table for small studios, suitable for recording and composition, Countertop, top shelf and keyboard shelf made of plastic-coated MDF board, Base made of powder-coated metal (colour: Black), Integrated 19" rack with 2x 4U, 2 Headphone...

to the product
186 €
Recently Viewed
Alesis Turbo Mesh Kit

Alesis Turbo Mesh Kit, E-Drum Set for beginners and semi-professionals, tom and snare pad with mesh heads, Turbo drum Module with 120 sounds, 10 drum kits, 30 Play-Along tracks, training and metronome functions, CD/MP3 aux input for drum playalong, USB/MIDI...

to the product
299 €
(2)
Recently Viewed
Audio-Technica ATH-M50 XBT

Headphones Closed, Circumaural, 45 mm Driver with neodymium magnet system and CCAW voice coils, 90° Swiveling earcups, Control buttons on the headphones, Bluetooth Version 5.0, Up to 40 hours of operation, Frequency range: 15 - 28,000 Hz, Impedance: 38...

to the product
199 €
Recently Viewed
Tech 21 Fly Rig PL 1 Paul Landers Sign

Multi-Effect for Electric Guitar Paul Lander's (Rammstein) Signature Model, 2-Channel SansAmp Fly Rig section, Active 3-band EQ in the "Fire" channel with switchable mids, Bite switch, 2-Band EQ and compressor in the "water" channel, Switchable dual mode boost, Optionally...

to the product
399 €
Recently Viewed
Fender SQ Bullet Tele LRL Red SPKL

Electric Guitar Body: Alder, Neck: Maple, Neck profile: C, Fretboard: Indian Laurel, Scale: 648 mm, Nut width: 42 mm, 21 Medium frets, Pickups: 2 single coils, Vintage style bridge, Colour: Red Sparkle

to the product
176 €
(3)
Recently Viewed
Presonus Atom

USB Pad Controller Flexible controller for production and performance, Perfect integration with Presonus Studio One, compatible with any DAW, Triggering virtual instruments, triggering drum samples and loops, 16 Stop and pressure dynamic RGB pads, Polyphonic aftertouch, 8 Pad benches,...

to the product
139 €
Recently Viewed
Fun Generation Concorde S

Fun Generation Concorde S, cartridge with spherical stylus, suitable for scratching, made by Ortofon, recommended tracking force: 4 g, nominal output voltage: 5 mV, frequency range: 20 - 18.000 Hz (+/- 2 dB), cartridge weight: 18,5 g, colour: steel grey...

to the product
50 €
Recently Viewed
Decksaver NI Kontrol S4 MK3

Dust Cover Suitable for NI Kontrol S4 MK3, Protects against dust, dirt, liquids and impacts during transport, Material: Polycarbonate, Dimensions (L x W x H): 54.5 x 33.5 x 3.4 cm, Weight: 0.76 kg, Milky transparent surface Note: ...

to the product
49 €
(1)
Recently Viewed
FabFilter Pro-Q 3

Equalizer Plugin (Download) High-quality EQ for all tasks with up to 24 bands, Surround support up to 7.1.2 Dolby Atmos with intelligent speaker selection, Dynamic EQ mode, Adjustable per filter band L / R or M / S mode,...

to the product
152 €
Recently Viewed
Magma Carry Lite DJ-Case XXL

Carrying Case Suitable for Pioneer XDJ-RR, Roland DJ-505 and NI Kontrol S4 MK3, Solid construction of laminated MDF material, Anodized aluminium moldings, Metal butterfly locks (can be optionally secured with a small padlock), 5 mm Thick foam rubber lining,...

to the product
95 €
Recently Viewed
Millenium SD-180 B StudioDesk

Recording Workstation Spacious work table for recording and production studios, Countertop, top shelf for monitor speakers, keyboard pull-out shelf and bottom plate made of plastic-coated MDF board, Powder-coated metal legs (colour: Black), Integrated 19" racks with 2x 4U, Dimensions...

to the product
311 €
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.

Please leave a comment. Please enter your e-mail address.