K&M 18826 Equipment Stand

()

Aloita 360°

Näytä käännös

Support Stand

For mixer, monitor, keyboard or amplifier
Scissors construction
Compensating parquet saver for stabilising the stand on uneven surfaces
Front rubber pads are axially movable to adapt to the size of the device
Height adjustable from 595 to 1015 mm
Pad width adjustable from 250 to 840 mm
Support depth: 350 mm
Material: Steel
Maximum load capacity: 50 kg
Size folded: 395 x 105 x 595 mm
Weight: 5.6 kg
Colour: Black

30 päivän palautusoikeus

Myynnissä vuodesta Toukokuu 2018
Tuotenumero 438145
Myyntierä 1 kappaletta
Load Capacity in kg 50,0 kg
Height 595 mm – 1015 mm
Keyboard Supports 1

122 €

Kaikki hinnat sis. ALV:n

Myyntisijoitus

kategoriassa Mikseritelineet

Bundlet ja tarjoukset

K&M 18826 Equipment Stand Bundle

182 €

Näitä ostavat asiakkaat, jotka ovat tutkineet tätä tuotetta.

75%

Ostettu

Täsmälleen tämä tuote

122 €

Ostettu

Fun Generation Universal Stand

K&M 18952 Stacker BK for 18950

55 €

76 Asiakkaiden arviot

5 66 Asiakkaat 4 8 Asiakkaat 3 2 Asiakkaat 2 0 Asiakkaat 1 0 Asiakkaat

4.8 / 5

Käsittely

Vakaus

Työnjälki

Arvosteluohjeet

48 Arvostelut

Näytä käännös

Näytä alkuperäinen

Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.

Holds up a Soundcraft Ghost

Boggs 10.07.2020

Use this as the mixer stand for my 24ch Soundcraft Ghost LE. The overall durability and quality of this stand is excellent. The handling could be slightly better in the sense that there is no real way to move the stand with whatever heavy item you have on it without feeling like you may be applying torsion or pressure to the stand, however, you probably shouldn't be doing that anyways. You can certainly put both hands under neath the main support bar to lift and nudge for slight adjustments but other than that remove your item first.

The stability is great and having a fairly heavy 24 track desk on it only sways slightly if the desk is not optimally positioned so it's centre of mass rests on the supports.

I've given it four stars in stability purely because the leg supports could come out a little further/be a little longer than the top supports plus there's no way to compensate for a slightly uneven floor, though in my studio the uneven concrete beneath my carpet hasn't ever made me feel uncomfortable with my items on it.

It's cheaper than an Argosy and certainly fulfils the same purpose, do recommend.

Raportoi ongelmasta

Uskotko, että tämä arvostelu on epätarkka tai hyväksymätön jostain syystä? Ole hyvä ja kirjoita syy tekstikenttään ja – jos mahdollista – anna mukaan sähköpostiosoitteesi mahdollisia kysymyksiämme varten.

Näytä käännös

Näytä alkuperäinen

Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.

Portable amp stand

YarneH 11.11.2020

We use this in the studio to hold up guitar amplifiers to eye level in the control room while the cab is in the live room.
It holds even the heavier amps quite well, although a little bit wobbly, I can put an expensive heavy amp on the stand quite confidently.
The knob system is a bit annoying, you have to turn quite a while before there's any movement possible, but then there's about half a turn left before the knob is completely out.

All in all, quite happy with this, made life in the studio a little easier.

Raportoi ongelmasta

Näytä käännös

Näytä alkuperäinen

Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.

Great keyboard stand

Kikodasneves 24.08.2020

I had been looking for a keyboard stand for a while. I have a yamaha p125 which is a narrow and quite tall keyboard. No brands other than k&m have decent minimum heights to play these kinds of tall keyboards at piano height. All the other brands I read about were around 65 cm minimum height which is in my opinion not low enough. This one (and most other k&m stands) go to a minimum of 60cm which I find perfect.

I had the k&m omega pro before this one but didn't find it stable enough (it's very stable, but for 150€, which was a little overbudget for me, I was expecting absolute perfection) so I sent it back and got this one. They are however quite similar in terms of stability, not perfect but very good for these kinds of narrow digital pianos. I was satisfied enough for the 100€. If your keyboard is deeper, it should be even more stable.

Quality wise, great as all k&m products are. Easy to carry and assemble. Could be a tad heavier for the extra stability, but it's great nonetheless.

Raportoi ongelmasta

Näytä käännös

Näytä alkuperäinen

Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.

Perfect for me

Aleksandra2 31.12.2025

I got the stand more than three months ago, and so far it has been fantastic. The stand is very strong and stable, I got it for my appartment, but I wanted it to be something that can fold down and be transported easily. I have a relatively old stage piano that is quite heavy (RD-500, 25KG) which I use mostly as a midi master keyboard, and this stand is perfect for it. Almost the entire width of the keyboard is completely solid, only the edges that fall outside the width of the stand can rock a little if you hammer the lowest or highest register, but realistically it will not move at all. When it is folded up, it is incredibly tiny and relatively light. It is far superior to any double braced X-stand, both in it's ability to fold up and in it's stability. The workmanship is excellent, it feels like it will last for a very long time. All in all I'm very happy with the stand, and I recommend it.

Raportoi ongelmasta

Lue kaikki arvostelut

K&M 18826 Equipment Stand

Support Stand

Näitä ostavat asiakkaat, jotka ovat tutkineet tätä tuotetta.

76 Asiakkaiden arviot

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

48 Arvostelut

Smart Navigator

Paras mahdollinen ostokokemus!

K&M 18826 Equipment Stand

Support Stand

Näitä ostavat asiakkaat, jotka ovat tutkineet tätä tuotetta.

Lisävarusteet ja yhteensopivat tuotteet

76 Asiakkaiden arviot

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

48 Arvostelut

Vertaile vaihtoehtoa

Smart Navigator