Blackmagic Design HyperDeck Studio HD Mini

Broadcast Deck

• For recording and playback of H.264, ProRes or DNxHD files in SD/HD formats up to 1080p/60 on SD/UHS-II cards or external USB drives
• 3G-SDI inputs and outputs
• HDMI output
• Dual SD card slots allow card swapping while recording is in progress
• Integrated clock and time code generators
• Front panel controls
• Acts like a webcam when connected to a computer via the USB port
• Can be used with any video software

Connections:

• 1 SDI video input
• 1 SDI video output
• SDI rates: 270 Mbit, 1.5 G, 3 G
• 1 HDMI video output
• Time code connections: 1 BNC input, 1 BNC output
• Reference connections: 1 BNC input, 1 BNC output
• Tri-sync or black burst
• SDI audio inputs and outputs: 16 embedded audio channels
• HDMI audio outputs: 8 embedded audio channels
• Remote control: 1 RS-422 input
• Computer interface: 1 USB-C-3.0 (up to 5 Gb/s) for recording to external drives, webcam output, software configuration and updates
• Video sampling frequency: 4:2:2 YUV
• Colour accuracy: 10 bit
• Colour spaces: Rec. 601, Rec. 709, Rec. 2020
• HDR support: Hybrid Log-Gamma, ST2084 300, ST2084 500, ST2084 800, ST2084 1000, ST2084 2000, ST2084 4000, ST2084
• Multirate support: automatic detection of SD and HD
• 2 SD card slots
• 1 USB-C 3.0 expansion port for external recording in SD, HD and 2K DCI
• Media type: UHS-I and UHS-II SD cards
• Storage media format: formats media in ExFAT (Windows/Mac) or HFS+ (Mac) file systems
• Supported codecs: ProRes HQ QuickTime, ProRes 422 QuickTime, ProRes LT QuickTime, ProRes Proxy QuickTime for all formats up to 1080p/60.
• DNxHD 220x, DNxHD 220x MXF, DNxHD 145, DNxHD 145 MXF, DNxHD 45, DNxHD 45 MXF for 720p and 1080p HD formats up to 60 fps
• H.264 SDI 4:2:2 10 bit, H.264 High 4:2:0 8 bit, H.264 Medium 4:2:0 8 bit and H.264 Low 4:2:0 8 bit for all progressive scan formats up to 1080p/60
• Built-in control panel: 8 buttons for transport and unit control with seek controller and 2.2" colour display
• External control: RS-422 deck control, SDI start/stop, timecode run
• Blackmagic HyperDeck Ethernet Protocol included Supports remote file uploads via FTP
• Software included: Blackmagic OS, Blackmagic HyperDeck Setup
• Product software upgrades loaded at start-up or via Blackmagic
• HyperDeck Setup via USB port
• Compatible operating systems: Mac Catalina 10.15, Mac Big Sur 11.1 or higher, Windows 10, 64 bit
• 1 integrated AC power supply for 100-240 V, 50/60 Hz
• 1x 12V DC power supply unit with 5.5mm barrel connector for external power supply or battery operation ( power cable not included)
• Dimensions: 140 x 177 x 44.2 mm (1 height unit, one third rack width)
• Weight: 820 g