Behringer NX3000D

Start 360°

Vis oversættelse

2-Channel Class-D Amplifier with DSP

Power: 2x 900 W at 4 Ωs, 2x 1500 W at 2 Ωs
Inputs: 6.3 Mm jack and XLR
Outputs: Speaker Twist
DSP features: Delay, crossover (3 filter types, slope up to 48 dB/octave), equalizer (8 parametric, 2 dynamic), security settings
Format: 19" / 2 RU
Case depth: 231 mm
Weight: 3.6 kg

30 30 dages-Money Back garanti

3 3 års Thomann garanti

Fås siden September 2018

Artikelnummer 448418

salgsenhed 1 stk

Power (4 Ohms) per Channel 900 W

Channels 2

Rack Units 2 U

Amp Class Class D

2 Ohm stable Yes

DSP/Crossover Yes

Convection cooling No

Width in mm 483 mm

Depth in mm 231 mm

Height in mm 88 mm

Weight 3,6 kg

Bridged Mode 1

Input XLR 1

Jack Input 6,3 sym. 1

Parallel Input 1

Link Out No

Output Speaker Twist 1

Vis mere

3.399 kr

Alle priser inkl. moms

Gratis levering. Forventet mellem torsdag, 2.05. og fredag, 3.05.

Salgsrang

i Forstærkere

Kunder som så på dette produkt købte dette

59 Kundebedømmelser

5 37 Kunder 4 15 Kunder 3 7 Kunder 2 0 Kunder 1 0 Kunder

4.5 / 5

betjening

features

lyd

forarbejdning

Retningslinjer for anmeldelser

44 Anmeldelser

A iNuke 3000DSP in new case.

Troels Olesen 16.12.2018

The Beheringer NX3000D seems to be exactly the same as my old iNuke 3000DSP, with at small number of changes.

The USB interface is moved to the back, and The case has been changed to a black finish, with metal front. It feels a bit more professionel than the old iNuke amps.

A internal change that i have noticed however, is that the NX series seems to have temperature monitoring, and unfortunately this puts the amplifier in protection mode if temperature is below 0 degree Celsius, making this not as versatile as the old iNuke, that could handle almost any condition.

My only complaint about this amplifier is the same as with the iNukes, the build in FAN is not low-noise, its not bad for stage use, but its annoying for use in small rooms when the music is low. This can however be fixed by changing the FAN, like i have done in my older iNuke amplifiers.

But overall a good follow up to the iNuke series amplifiers.

betjening

features

lyd

forarbejdning

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Lightweight in Kg, Heavyweight in Sound Quality

UK Beachboys 24.05.2020

I've never paid attention to the negative press Behringer used to receive and simply made my own mind up. I have 2 X X32, lots of P16 mixers so when I needed some amps for a new system I spotted these. Initially the draw was the weight, but then I noticed the digital version, and for the small increase in cost went with a couple of these - blind. My intention was to do the crossover in the X32, but once I had them in the rack, I tried the laptop programming of the crossover functions and decided that this would make the rack more versatile for multiple uses, so I just feed these amps with a L+R and leave them to do the crossover functions. Works perfectly. I'm never careful with equipment - my use of every product is heavy handed and I often break 'rules' and these appear quite happy to accept accidental no load, or simple power up by just turning on. They just work. No excessive temperatures, no annoying features. The fans are quite loud, if that's an issue, and I wish they had the choice of XLR and jack, as in some of the Thomann own brands - as you can use these for loopthroughs. On these amps I had to make up cables to do this, but it's a small point. The absolutely best feature of course is the weight - as in they weigh so little. I have a Thomann 2400 amp in the same rack. It weighs more than the two Behringers combined, plus some! The LCD screens on the front are quite narrow angle, so reading them from above or the sides can be tricky - you need to be face on to really see the detail - if like me you wear varifocal glasses, it's difficult to read without squatting down, but that's a minor point. I'll certainly buy more of these.

betjening

features

lyd

forarbejdning

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Perfect for bass transducers on my simulator rig.

Twinny 31.03.2020

Using this to drive 2x Buttkicker LFE's on my simulator. I returned a recently purchased NU1000D that I purchased from another online retailer as this was just released within the return window for not much more money.

The amp has plenty of overhead if you're not driving the LFE's at their max and this DSP version has loads of features to make sure you can get the best sound out of your setup without fear of not having enough power or damaging your equipment. Specifically bought the DSP version as the built in filters and crossovers mean I can have the granularity I need to control the audio being pushed to the transducers, which is essential when they are being used to replicate specific effects in racing or flying simulators.

Only two downsides which are more of an unfortunate design choice then an actua downside, doesn't really detract from the value:

1. Some of the DSP features are only useable through the USB interface meaning you have to have a computer connected to it for really fine tuning. You can save the patches and recall them without the PC after you have made them. Onboard menu is perfectly funtional but better off using the software when setting it up.

2. The fans are LOUD. No change here from the previous model. This is the only reason I knocked a star off quality because this thing looks and sounds great otherwise.

Will be picking up a few more of these as I acquire more transducers.

betjening

features

lyd

forarbejdning

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

fake power

Jurcek 15.05.2020

RMS power measured is only a half of declared - 440W on 4 ohm.
I think that this exagerrating with declerated output power is present in all Behringer's digital amps.
Very noisy ventilators.
Software ( DSP ) is ok - the same one is used in Lab Grupen PDX3000.
Worth the money - but nothing more !

betjening

features

lyd

forarbejdning

Anmeld bedømmelse

Læs alle anmeldelser

Behringer NX3000D

2-Channel Class-D Amplifier with DSP

Kunder som så på dette produkt købte dette

59 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

44 Anmeldelser

Smart Navigator

Artikel historik

Handl og betal sikkert

Dine fordele

Service

Serveret med kærlighed!

Behringer NX3000D

2-Channel Class-D Amplifier with DSP

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

59 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

44 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator