Neutrik NTP3 RC

319

Mini Jack

  • 3.5 mm Angle - Jack male
  • Stereo
  • With 2-piece housing
  • Screw nozzle
  • Original Neutrik strain relief
  • Suitable for cables from 2.0 to 4.5 mm diameter
  • Nickel housing
  • Nickel contacts
Tillgänglig sedan Mars 2004
Artikelnummer 167467
försäljningsenhet 1 Styck
Build In No
Type TRS (stereo/sym.)
angled Yes
Plug Jack 3,5 mm TRS male angled
52 kr
inklusive moms, 99 kr frakt tillkommer
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
Leverans beräknas mellan Måndag, 6.05. och Tisdag, 7.05.
1

319 Kundbetyg

4.7 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

hantverkskvalitet

131 Recensioner

m
The only really good one.
mansaxel 09.09.2020
We all hate/love the 3,5mm plug standard. Mostly dislike, actually. This connector makes life easier. As all Neutriks, the strain relief is good, it solders well, but here we're not treated to an abundance of wiggle room inside, and thicker cables are out of the question. I've had good results from lubricating cable that is really on the limit of what can fit before trying to insert it in the backshell. The threads also do well with some lube, just a little bit. I've used special conduit lubricant, but others would work too, as long as they don't destroy the cable.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

Z
Very tricky to solder
ZebraJoh 15.01.2020
It's so small that you need the hands of a five-year-old to handle it.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
S
Finally pro quality 3,5mm plug
Slobodan 06.02.2017
This is from my experience one of the very few 3,5mm plugs suitable for pro stage use. I use it for wired IEM and have a full confidence in it's construction.

The quality of the tip is standard from Neutrik, and it has strain relief that actualy does the job. For me this is really important feature for every pro audio cable.

This plug is really small and can be little tricky for soldering, almost impossible if your cable is over 4mm thick - it won't fit the strain relief. Due to that "only" 4 stars overall. But once completed, I believe it's indestructible
hantverkskvalitet
1
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
FM
Expected more from Neutrik
Funeral Musician 22.01.2023
I purchased a few of these plugs because I wanted to shorten the cables on some of my headphones. Unfortunately, as I was putting the strain relief on the cut-off cable before soldering, the strain relief tore right at the molding line (please note that the diameter of the headphone cable did not exceed the maximum diameter specified by Neutrik on their website). There was also a large and unsightly molding mark on the strain relief, which could have been easily removed at the factory. I had to use a razor blade to cut it off flush. Finally, even though each metal part of the plug looked very high quality, when I screwed them all together, there were large gaps between them, and the entire assembly rattled when shaken. I had expected a lot more from Neutrik... Curiously, when I looked at the packaging the plugs had come in, on some of them it said “Made in Liechtenstein”, and on others — “Designed in Liechtenstein”. Does it mean that the manufacturing facilities have been moved elsewhere? It might have been a coincidence, but all of the “Made in Liechtenstein” plugs appeared to fit together a bit better than the “Designed in Liechtenstein” ones. I managed to finish the task using one of the better plugs, but I still had to glue it together with instant adhesive to prevent the unsightly gaps between the metal parts. I will not buy these plugs in the future.
hantverkskvalitet
1
0
Anmäl recension

Anmäl recension