Starta 360°
2Port Node
- Converts network data to DMX
- Synchronously outputs two DMX universes
- Can be configured remotely via any grandMA3 console or an onPC workstation
- All grandMA3 xPort Nodes (with the exception of the DIN-Rail versions) are also available as onPC versions, which allow activating parameters for onPC workstations
- MA-Net3, MANet2, sACN and Art-Net compatible
- Fully RDM compatible
- 3.9" Colour display on the front enables easy configuration and provides a quick overview
- In order to guarantee a highly reliable and stable data exchange, all grandMA3 xPort nodes are equipped with a powerful processor and a 1,000 Mbit/s network interface
- Parameter: None
- Parameters Mode2: None
- 1x Power Twist TR1
- 1x etherCON/RJ45
- 2x DMX512-A Out (5-pin XLR female)
- 1x USB 2.0 (type A)
- Input voltage: 100 - 240 V / 50/60 Hz
- Power: Max. 15 VA
- Dimensions (W x D x H): 207 x 184 x 43 mm
- Weight: approx. 2 kg
Note: Please note that this Node is only an extension for already existing MA3 systems. This Node alone does not activate DMX channels in the software. An MA3 console or an onPC Node (e.g. article no. 469458 - not included) is always required for operation.
Tillgänglig sedan
December 2019
Artikelnummer
480796
försäljningsenhet
1 Styck
Type
Ethernet-Interface
Type of construction
Desktop
Connection for PC/Ethernet
RJ45
Universes (Outputs)
2
DMX-Output
5-pole XLR female
DMX-Input
through Output
RDM-capable
Yes
Internal memory
No
Visa variationer för denna produkt
