Doepfer A-145-4

27

Eurorack Module

  • Fourfold LFO
  • Per channel frequency control and output for triangle and square waveforms
  • Two frequency ranges per channel selectable via jumper (0.002 Hz - 50 Hz)
  • Current consumption: 30 mA (+12 V) / 30 mA (-12 V)
  • Width: 4 HP
  • Depth: 30 mm
Tillgänglig sedan Juni 2019
Artikelnummer 467576
försäljningsenhet 1 Styck
Width 4 TE / HP
965 kr
inklusive moms, 99 kr frakt tillkommer
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
Leverans beräknas mellan Tisdag, 7.05. och Onsdag, 8.05.
1

27 Kundbetyg

4.7 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

drift

funktioner

hantverkskvalitet

19 Recensioner

b
Good design, bad build.
bergman61 30.04.2021
I liked the idea of having four independent LFOs in a small form factor. And my experience so far of Doepfer’s small pots have been very positive. I have the Mini stereo mixer and the Clock multiplier - a total of nine pots with the small rubberized knobs - and they all have a very smooth travel. Not so this module! The pots are just as hard to turn as the older modules. This may not be a problem for you, but it turned me off totally.
Also the front panel was bent and could not be attached to the rails in my rack without warping them a bit. (Seriously, Doepfer...!) The jacks were also not perfectly in line, and one of them was sticking out outside the panel. I could not mount another module next to it without leaving a gap. Really bad QC!
The circuit design is simple but it works. LFO outputs are ok. The LEDs are a bit of a struggle though. As with all diods, these are not lit until the voltage reaches around one volt, so there is quite a big ”gap” where there is no indication at all. This can be compensated for in a circuit design, but as said this is a simple design.

Conclusion: If you can put up with the lacking quality in details, as mentioned, and you really want four independent LFOs in 4 HP, then this might be a good choise.
drift
funktioner
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
J
Does what it does
Joesh 18.11.2021
A nice simple LFO which does exactly what LFOs do, for a reasonable price and not too much space in your rack either. The A-145-4 certainly is useful as either a four LFOs or even as Triggers (or both at the same time too).

For the rest, it's a Doepfer, which means good quality product, sturdy knobs and the usual plain look. Otherwise, if you want more control (meaning CV attenuators or whatever), you'll need to put a bit more money towards a more sophisticated module.
drift
funktioner
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
tt
Cool little LFO!
the t.daniele 24.07.2021
4 LFOs at a very low price and small hp.

Perfect!
drift
funktioner
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
s
4 invisible hands
startrec 10.05.2022
Does what it says on the tin, no cv in but that was obvious. I’d have preferred 1 extra hp in width in order to pad the jacks, but I get the point of max function/hp
drift
funktioner
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

Passande från YouTube