Behringer 150 Ring Mod/Noise/S&H/LFO

61

Eurorack Module

  • Analogue ring modulator
  • Noise generator with two outputs for white noise and pink noise
  • Sample & hold unit with clock out, external clock in and fader for clock rate and lag time
  • Analogue LFO with 5 waveforms
  • Fader for frequency and delay time
  • Three frequency ranges selectable (0.03 - 30Hz)
  • CV and trigger input and 2 signal outputs
  • Current consumption: 60mA (+12V) / 50mA (-12V)
  • Width: 16 HP
  • Depth: 44 mm
Tillgänglig sedan Juli 2020
Artikelnummer 488454
försäljningsenhet 1 Styck
Width 16 TE / HP
B-Stock från 675 kr tillgänglig
715 kr
inklusive moms, 99 kr frakt tillkommer
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
Leverans beräknas mellan Måndag, 6.05. och Tisdag, 7.05.
1

61 Kundbetyg

4.7 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

drift

funktioner

ljud

hantverkskvalitet

35 Recensioner

b
Not perfect but good replica of original module.
bergman61 30.04.2021
First impression: Good craftmanship. Finish is nice, it looks good in my rack!
Sliders and switches are small, which is rather obvious, this being a replica of a significally larger original. How long will the sliders last? Time will tell.
Now to the functions: Not much to say about ring mod and noise. It works as expected. The LFO frequency is voltage controlled, which is fine. The Trigger in has nothing to do with sync though, as someone has already mentioned. A trigger just sets the output amplitude to zero, from which it returns to max output after the selected delay time. This is typically used to add vibrato on sustained notes. (Or some other modulation.)
The S&H section looks good to begin with, and it does work well too. BUT, this is an analog circuit, which means there will be a ”droop”, a drop in output level with time. I measured this droop to 0,2 V per minute, translating to 1 semitone per 25 seconds. This is probably not a problem in most situations. Just be aware that this S&H is not good for sustained notes. As a comparison the S&H of the Twin Wawes VCO/LFO, which is a digital module, has a zero droop.

Conclusion: If you like the esthetics of the old Roland System 100m (and who doesn’t?), and you like to hang on to your cash as long as possible, then this might be for you.
drift
funktioner
ljud
hantverkskvalitet
1
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
M
A multitool for your Eurorack
Monkeproggs 01.10.2020
This great little module has a lot of features to spice up your sound.
White noise 2 3.5mm outs, White noise 2 3.5mm outs, a Ringmodulator, A Sample and hold and an LFO.
The ringmodulator works great and the inputs are internally wired to LFO and Noice if nothing is inserted to the input jacks. It sounds good, not super metallic (but it can sound metallic) I'd say it sounds more "earthy" and real.
The S/H is fantastic. Also internally wired but switchable between noise, LFO and External. This also features a internal clock that you can use to drive other gear if you want. It has a clock in and sliders for tempo and Lag (Slide between sampled voltages).
Now to the best piece, The LFO. This little thing doesn't look like much but it packs a lot of features.
Firstly it har a Frequency input so you can control the frequency of the LFO via CV (try controlling it with another lfo for super fun wierdness). It has a trigger in, a reset in and 2 outputs (one inverted phase). It has a setting for 3 speeds (Low Medium and Fast) and a x10 amplifier for the signal. And I love it to bits. It's great and sounds great. Even if using it as a sound.
Yes the sliders are small (especially when there is 300 wires hanging from it, but the handle well and feel great.
drift
funktioner
ljud
hantverkskvalitet
5
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
a
Behringer 150
acerimmer 19.03.2022
As all of the Behringer System 100 modules, this one is no exception.
Build quality is great, ease of use is good and overall performance is excellent. I have all of the system 100 modules in my setup and all have been well built. Price point is good, especially from Thomann.
If you are looking at modular (and this is my first time with modular) I could recommend these modules. I know there are so many available selections out there and it is hard to chose but from a price point, these are a good value to start with.
Enjoy!
drift
funktioner
ljud
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
MH
Fantastic multipurpose module!
Mr. Harold 13.09.2020
Simply fantastic! You get 4 modules in one, which saves a lot of space on your rack. I especially like the sample and hold section, which lets you use both external and internal signals (no patching required). The S&H has its own internal clock too, which is really awesome. The LFO is nice too, it can go quite slow on the lowest settings, has 5 waveforms and an additional inverted output. The noise generators and ring modulator are alright; basic, but what else do you need? Nice to have two outputs for each noise type, too.

The module itself looks gorgeous. I love the System 100m aesthetic, the color is classy, the S&H clock and LFO have nice green diodes indicating the speed/frequency, and the four sliders emanate bright red light constantly. Looks great, works great, the price is great, no complains at all. I absolutely love it!
drift
funktioner
ljud
hantverkskvalitet
2
0
Anmäl recension

Anmäl recension