Tube Amp Manufactur Amp-Switch 4/2 V3

5

Switch

  • For up to 4 guitar amplifiers and 2 x 2 cabinets at one signal source
  • Direct 1:1 sound comparison of the connected amplifiers and cabinets without signal distortion
  • Passive switching with relay
  • Suitable for all amplifiers - tube and transistor
  • 4 Amp inputs: 6.3 mm jack plug
  • 4 Amp speaker outputs: 6.3 mm jack
  • 4 Speaker outputs (2 x 2): 6.3 mm jack
  • Remote output
  • Integrated 230 V power supply
  • Format: 19" / 1 U
  • Dimensions (W x H x D): 480 x 45 x 120 mm
  • Weight: 1.5 kg
Produkt dostępny od Wrzesień 2019
Numer artykułu 469167
Jednostka sprzedaży 1 szt.
2 333 zł
darmowa wysyłka, zawiera podatek VAT.
Dostępny za 11-14 tygodnie
Dostępny za 11-14 tygodnie

Produkt będzie za niedługo dostępny i natychmiastowo gotowy do wysyłk.

Informacje dotyczące wysyłki
1

5 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

obsługa

właściwości

dźwięk

wykończenie

4 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
O
Must have gear for home studio with more than 2 guitar amps
Oujee 06.04.2021
Excellent price for they value. Brings good sound quality and just works well. Compared to more expensive equipment on market this is most of the cases enough for basic users. Can have up to 4 amps (transistor and tube, this can be selected from back), up to 4 speakers, 2 at one input mode (this has 2 input modes). I have this setup with 4 tube amps, UA OX and 2nd basic power soak to provide fail safe solution for accidental speaker B selection.
obsługa
właściwości
dźwięk
wykończenie
3
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
Eo
Die Lösung für mehrere Amps
Edge of Forever 15.05.2020
Ich suchte nach einem Ampswitcher um meine Röhrenamps ohne ständig die Verkabelung ändern zu müssen in meinem Homestudio benutzen und Aufnehmen zu können.

Ich betreibe an einem der beiden Boxenausgänge ein TwoNotes Torpedo Reload an welches eine weitere Box angeschlossen ist. So, dass ich auch jederzeit bei geringer Lautstärke Aufnehmen/Spielen kann wenn nötig. Damit ist es für mich nun möglich endlich ohne große Verkabelungsorgien den Amp zu nutzen den ich gerade benötige. Am anderen Boxenausgang hängt eine weitere Box zur Pflege guter nachbarschaftlicher Beziehungen ^^

Die Verarbeitung des Gerätes ist sehr gut. Es macht einen sehr wertigen Eindruck. Das Gerät erfüllt meine Erwartungen vollends!
Es sind keinerlei Veränderungen im Sound feststellbar - also PERFEKT!

Einziges Manko - so es denn eines ist (!): wenn man die Funktion nutzt das Gerät selbst als Eingangsinputverteiler von der Gitarre zu den Amps aus zu nutzen pfeift es, wenn kein Kabel im Input des Gerätes eingesteckt wurde. Interessanterweise pfeift es aber nicht wenn man ein Kabel angeschlossen hat, dieses selbst jedoch nicht in der Gitarre steckt. Ob das eine Fehlfunktion ist kann ich nicht beurteilen. Denn ich nutze an meinen Amps sowieso die 4-Kabel Methode mit meinem Helix LT und somit immer direkt den Input der Amps. (Es fiel mir nur beim Ausprobieren sämtlicher Funktionen des Amp-Switch 4/2 V2 auf.)

Ich würde den Tube Amp Manufactur Amp-Switch 4/2 V2 jederzeit sofort wieder kaufen.
obsługa
właściwości
dźwięk
wykończenie
5
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate fr
Wystąpił błąd. Proszę spróbować później.
C
Un must have en studio!
Chtifleur 30.03.2021
Disposant de plusieurs têtes d'amplis guitare et de plusieurs baffles, la fainéantise de décâbler / recâbler / déplacer les baffles / les têtes / tout mon bordel à chaque fois que je veux changer de tête d'ampli ou de HP m'ont poussé à acheter ce superbe switch rackable.

Utilisation simple, sans accrocs - Le casing est solide, les boutons aussi, et aucune altération du son. Le petit clic lors du changement / choix d'ampli est rassurant, signe que des relais dignes de ce nom habitent ce bel outil.

Gain de temps considérable en studio, pour faire un choix rapide entre plusieurs amplis / baffles en pré-prod.
obsługa
właściwości
dźwięk
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
D
Kein Kabel umstecken mehr.
DieterL 27.12.2021
Damit sind auch mögliche Fehlerquellen beseitigt. Funktioniert perfekt.
obsługa
właściwości
dźwięk
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie