B
safety first
i use this case to carry a bunch of harps, a shure 520 dx, a marshall switch pedal and various papers. the internal foam is quite easy to shape with a long blade. the whole case is strong and very good to take care of your stuff.
0
0
Zgłoś nadużycie
MA
Suitable for wireless microphone storage case.
I ordered this case for wireless microphone storage. Considering the square form inside, six handhelds, six belt packs, and batteries can be stored.
In fact, I was worried that the space would be too poor after square foaming. However, after a little reinforcement, it became a satisfactory case.
The other reason for choosing this case is largely because. The width does not exceed the size of the 19-inch rack case, so it is advantageous to store it. The fact that the size of the case is standardized is a great advantage for equipment movement and loading.
If you have any problems, I would like to have a rubber ball for anti-slip on the bottom of the case and I want to eliminate the ball corner. It does not matter when you use them one by one. However, if you put two or more pieces together, they will slide. Using rubber feet and flat corners will solve this.
Thank you for making a good case.
In fact, I was worried that the space would be too poor after square foaming. However, after a little reinforcement, it became a satisfactory case.
The other reason for choosing this case is largely because. The width does not exceed the size of the 19-inch rack case, so it is advantageous to store it. The fact that the size of the case is standardized is a great advantage for equipment movement and loading.
If you have any problems, I would like to have a rubber ball for anti-slip on the bottom of the case and I want to eliminate the ball corner. It does not matter when you use them one by one. However, if you put two or more pieces together, they will slide. Using rubber feet and flat corners will solve this.
Thank you for making a good case.
0
0
Zgłoś nadużycie
TS
Expensive but worth it
If you have fancy gear that is worth protecting, then go for it. The universal foam lets you put whatever you want in it, and makes sure that all the items are safely stored - nothing moves when the case moves.
The case itself is super sturdy - I do not see anything breaking for at least 50 years.
Regarding the foam, it is easy to cut, and yes it is possible to cut halfway to the bottom, you just need to rip the foam off where you want to stop (the precuts are made for cutting all the way to the bottom).
And you can put a lot in there - I personally use it to store:
* 2x Shure SM57
* 2x Shure SM58
* 1x Shure Beta 52A
* 1x AKG D7
* 3x Sennheiser E604
* 1x Sennheiser E906
* 2x Røde M5
* the clips for all these mics
* 2 snare holders
* a bunch of adpaters and small cables
The case itself is super sturdy - I do not see anything breaking for at least 50 years.
Regarding the foam, it is easy to cut, and yes it is possible to cut halfway to the bottom, you just need to rip the foam off where you want to stop (the precuts are made for cutting all the way to the bottom).
And you can put a lot in there - I personally use it to store:
* 2x Shure SM57
* 2x Shure SM58
* 1x Shure Beta 52A
* 1x AKG D7
* 3x Sennheiser E604
* 1x Sennheiser E906
* 2x Røde M5
* the clips for all these mics
* 2 snare holders
* a bunch of adpaters and small cables
0
0
Zgłoś nadużycie
M
Thon Flex Cut Universal Case
Need a case for 2 shure wireless systems - only problem is you can't but one off the shelf - solution - bought this. Cut out was very easy - even made room for some spare batteries! Protecting your investment is really important AND now it can come with affordability as well with the Thon range.
2
1
Zgłoś nadużycie
@
Perfect for BCF2000
Really versatile and affordable case.
Bought this for a Behringer BCF2000. Fits perfectly though i cant use the unit in the case, not an issue it was for transport only.
Had spare space so was able to cut out 3 holes one for power cable, one for USB Cable and one for a MyDMX3.0 interface.
An equivalent BCF case online was £100 so this was a great choice for me.
Would be nice if the lid lifted completely off but not an issue considering the price
Bought this for a Behringer BCF2000. Fits perfectly though i cant use the unit in the case, not an issue it was for transport only.
Had spare space so was able to cut out 3 holes one for power cable, one for USB Cable and one for a MyDMX3.0 interface.
An equivalent BCF case online was £100 so this was a great choice for me.
Would be nice if the lid lifted completely off but not an issue considering the price
0
0
Zgłoś nadużycie
GL
Ready for the road
This is a strong little case that i used to house my laptop and shelter it from the bumps and scrapes of life on the road. The foam square's inside are very easily to mould to the shape that you need meaning your valuables are kept tight and don't roll around.
2
0
Zgłoś nadużycie
c
quality case for a good price (ideal for Fractal AX8)
0
0
Zgłoś nadużycie
MC
Nice, Cheap and Well made.
This is a great case but I found the foam a little difficult to tear out neatly. Its pre cut into tiny little cubes but I think mine may not have been cut correctly or something because it seemed to be coming out badly. I used a craft knife in the end and a razor blade to cut it neater. Once it was ready for my gear it was perfect. Everything was nice and snug in transit. A really nice case. Cheap too :-)
0
0
Zgłoś nadużycie
K
Strong but heavy
This case is very sturdy and provides perfect protection for anything you put in there. You can cut out the foam inside to fit anything in there.
The case is a little heavy even when empty and becomes easily around 10kg when you put a basic mixer a few little things in there. But overall really recommend this case because it is super strong and durable and locks up nicely.
The case is a little heavy even when empty and becomes easily around 10kg when you put a basic mixer a few little things in there. But overall really recommend this case because it is super strong and durable and locks up nicely.
0
0
Zgłoś nadużycie
p
Exceptional Value
Build quality is top notch. All edges are covered with metal strips and corners are rounded off with a dome-shaped metal part. Hinges are high quality. Handle is well secured to the case. The black paint job on plywood looks okay. Locks are perfect. Foam is quite dense. Overall a little heavy, but feels really sturdy.
0
0
Zgłoś nadużycie