Thon 4U Live Rack rail

190

Rack rail assembly set for 4 U Live Rack

  • For self assembly in Thon Live Rack 4 U
  • 2 Rack rails stocked with nuts and rubber inserts
  • Attachment rivets
  • M6x12 Rack screws with matching washers
  • Wood block spacers
Produkt dostępny od Październik 2013
Numer artykułu 325717
Jednostka sprzedaży 1 szt.
Rack Rail Yes
74 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Wtorek, 30.04.
1

190 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

74 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
Great way to add a rear rack rail to a double door
Mark2018 14.07.2021
The set is perfect, with just a drill and a rivet tool you can add a rear rack rail to a Thon double door and you will not see the difference between the factory side and the DIY side. OK, it is annoying that the rear rail is not installed standard and they do not have the 3RU set (that means sawing and drilling). And OK there is no manual to speak of. but it is pretty plain what needs to be done. Add the nuts and rubber before installing and you are golden.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
JM
Perfect for rear rails of Rack cabinet
Jack Major 31.01.2021
I used these to mount the rails on the back of my Thon rack. The high aligned nicely with pre-existing rails and recommend in case you want nice cable management in the back of your rack. Right now I operate with 20+ sockets in the back of it, and no cables are on my floor as I could set up nice rack cable managements in the back of my rack. Great kit.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
W
Solid, with a little twist
WelderOriginal 08.04.2024
Bought this set to add rack units to the back of a Flyht Pro Rack 4U. Fits in perfectly (I did not need the wood blocks). Be aware, though, that the rails do not have a notch on their side to slide M6 nuts. This means if you set up the rails, lock them with the rivets, but you forgot to slide all the necessary nuts for your units beforehand, it's game over and you have to disassemble the thing. I'd recommend locking the rails using bolts instead of rivets.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
1
Nice
16channelmusic 23.11.2018
I've used it to make a custom rack for my project studio. Only bad thing about it are the rivets, in my set about 2 or 3 where faulty. Overall, nice product.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie