T
Brilliant microphone shock mount
If you have a large condenser microphone, these shock mounts are excellent.
Mounting your mike on one of these reduces the noise floor considerably and stops an enormous amount of low end rumble from being transmitted up the microphone stand.
I wouldn't have believed how much of an improvement a mount could make if I hadn't have recorded with and without the rycote and compared.
night and day difference - i now have them on all my large mikes.
The pop shield also works really well and attaches to the mount very securely and tidily. Easy to swing out of the way as well.
Highly recommended.
Mounting your mike on one of these reduces the noise floor considerably and stops an enormous amount of low end rumble from being transmitted up the microphone stand.
I wouldn't have believed how much of an improvement a mount could make if I hadn't have recorded with and without the rycote and compared.
night and day difference - i now have them on all my large mikes.
The pop shield also works really well and attaches to the mount very securely and tidily. Easy to swing out of the way as well.
Highly recommended.
2
0
Zgłoś nadużycie
AD
A relief compared with all those wobbly elastic bands.
Very happy, the integrated popfilter makes it even more compact and solid. Very recommendable. Only the price is really bizarre, this piece of (well made but) hard plastic should cost max 30 euro instead of 85. You do get a spare piece of popfoam-replacement (which cost 50 cts to produce max, but nevertheless). The only disadvantage is maybe when you have to switch mikes a lot (I don't) : it's not a quick release clamp but there are four padded screws you have to unscrew and tighten again, that might be a hassle then. I use the Studio Kit on a Manfrotto Magic arm which is genius for table recording and much sturdier, flexible and compact than most studio mike stands. So except for the price (hence 4 stars) I can recommend it!
0
0
Zgłoś nadużycie
F
Unobtrusive absorbant Plosive Reducer
I've lived and worked with the Rycote Invision Studio Kit for many years now with my TLM103. A permanent part of the set-up, it handles all the bursts of breath thrown its way.
The Rycote team located in Stroud, UK, employ four Lyre suspension brackets to support the circular frame and the shield is a 10mm‑thick foam pad, placed within plastic nubs front and rear of the oval-shaped support ring. Allows for quick replacement with the extra foam pad supplied. No HF roll off and a good absorber of gusts when performing loud voice-overs. The Lyre suspension minimising vibration, although my boom arm is screwed to a wall. Solid in place; use it atop a stand conventionally with the Rycote foam pad perched on top of the suspension, or like me, hang it from the circular frame when using a boom arm mic holder over a screen.
The Rycote's size and distance-to-mic doesn't intefere with script reading and is a stylish addition to the set-up.
The Rycote team located in Stroud, UK, employ four Lyre suspension brackets to support the circular frame and the shield is a 10mm‑thick foam pad, placed within plastic nubs front and rear of the oval-shaped support ring. Allows for quick replacement with the extra foam pad supplied. No HF roll off and a good absorber of gusts when performing loud voice-overs. The Lyre suspension minimising vibration, although my boom arm is screwed to a wall. Solid in place; use it atop a stand conventionally with the Rycote foam pad perched on top of the suspension, or like me, hang it from the circular frame when using a boom arm mic holder over a screen.
The Rycote's size and distance-to-mic doesn't intefere with script reading and is a stylish addition to the set-up.
0
0
Zgłoś nadużycie
b
Rycote Invision USM Shockmount & Pop Shield (Studio Kit)
Bought this to hold my vintage AKG C422 Stereo Mic at an angle but soon found that it will securely hold almost any shape of mic including my vintage AKG C414 Comb. Isolation is excellent and the design is ingenious - if like me you have a collection of lovely old mics you'll wonder how you managed without it! The Pop shield is very efficient and transparent - a brilliant piece of kit.
1
0
Zgłoś nadużycie
m
Great product!
Great shockmount and amazing popfilter. I use it for Neumann tlm 102.
0
0
Zgłoś nadużycie
D
Its worth it.
I had a really cheap Behringer shock mount. It worked, but it slipped at times and was kind of annoying to use. This is a great upgrade and works perfectly with my Aston Spirit
0
0
Zgłoś nadużycie
A
tlm103
I bought this for my Nuemann TLM 103, and it fits like a glove. The clamps are excellent, keeping the microphone rock solid. Very happy with the clear sound, as any occasional vibrations from the floor are no longer a worry.
0
0
Zgłoś nadużycie
B
Good filter and shock mount
Good quality filter which keeps the air out but doesn't change the sound. Material feels sturdy and easy to hook up to the stand. The filter comes off separate so it's easy to transfer.
I use a AT-4040 mic which fits perfectly and with the adjustable screws any mic would fit.
I use a AT-4040 mic which fits perfectly and with the adjustable screws any mic would fit.
0
0
Zgłoś nadużycie
K
Pricey
Good and useful, but expensive. OK, the official U87 shockmount is four times more expensive, but that price is crazy.
But this, OK, absolutely perfect for the the need, works very well and the pop filter what comes with the shockmount is the best I've ever used.
But this, OK, absolutely perfect for the the need, works very well and the pop filter what comes with the shockmount is the best I've ever used.
0
0
Zgłoś nadużycie
S
The pop filter smells horrible
Pop filter smells disgusting, and even after putting it in the washing the smell is still very strong, asides from that the shock mount is alright
0
0
Zgłoś nadużycie
