Rockboard Quick Mount Type A

10

QuickMount Pedal Mounting Plate

  • For Electro Harmonix Nano Series and MXR effect pedals with standard housing
  • Spacing of mounting holes (W x D): 51 x 102 mm
  • Mounts effect pedals securely on RockBoard pedalboards
  • Replaces cumbersome hook and loop fastener
  • Mounts on existing effect pedal backplates and can be removed without leaving residue
  • No permanent modifications required
  • Made of carbon reinforced composite plastic
  • Includes replacement screws and silicone adhesive pad for pedals without backplate screws or other screw hole configurations
Produkt dostępny od Maj 2020
Numer artykułu 493223
Jednostka sprzedaży 1 szt.
36 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Środa, 15.05. and Czwartek, 16.05.
1

10 Oceny klientów

3.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

4 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
SG
Wrong MXR/EHX replacement screws
Stefano Giuli 28.11.2020
Clever solution to avoid the use of velcro.
Unfortunately the RockBoard provided alternative screws are wrong for MXR and/or EHX pedals: the assembly of the QuickMount Type A with a MRX and/or EHX pedal with the RockBoard alternative screws will permanently oversize the pedal mounting holes, compromising the geometry of the pedal case without any possible corrective action.
This information, at least, shall be stated as a "warning" in the product instructions in order to avoid possible damages on any part.
Replacement screws with a correct diameter will be a good, and expected, product improvement.
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
H
Leider kaum brauchbar
HokiStudios 26.09.2021
Beigelegte Schrauben haben für MXR Boxen das falsche Gewinde (MXR Original hat Zollgewinde). Originalschrauben sind zu kurz. Das beigefügte Silikonpad liefert zu wenig Klebeleistung (Gerät fällt ab, wenn man das Board umdreht). Nutzen lässt sich das Teil nur mit Velcro Verklebung - dann kann man allerdings auch gleich die (preiswertere) UV Variante wählen.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate fr
Wystąpił błąd. Proszę spróbować później.
m
Oui MAIS...
matt8602 19.03.2023
Acheté en connaissance de cause suite aux commentaires indiquant un problème de diamètre sur les vis, et c'est vrai malheureusement. C'est dommage, car le concept en lui-même est formidable, mais il faudrait peut-être que le fabricant se remette en question après plusieurs années, à croire qu'ils n'ont pas testé le produit avant de le commercialiser. Les vis fournies sont en 4 mm, et le format US des MXR correspond sensiblement à du 3,5 mm. Sur 3 de mes pédales MXR, les vis d'origine sont assez longues pour fixer le quickmount, sauf pour l'une d'entre-elles (exception qui confirme la règle, pas de chance). Pour info, j'ai trouvé des vis du bon diamètre et de la bonne longueur sur un site chinois bien connu qui vend de tout, mais il faut prendre en compte le délai et un léger coût supplémentaire.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie