Rockboard PatchWorks Patch Cable GD

11

Solderless Patch Cable System

  • Set for 5 patch cables
  • Includes 10 plugs and 3 m cable
  • Unique 2-piece 2-way connector design (patent pending)
  • Can be configured as a straight or angled plug
  • Plug 'n' Play design - no stripping of the cable necessary
  • Plug dimensions straight (L x W x H): 20 x 12 x 10 mm
  • Plug dimensions angled (L x W x H): 15 x 13 x 10 mm
  • Gold-plated contacts
  • Gold finish
  • Low cable capacity for maximum signal transparency
  • Flexible oxygen-free copper conductor 7 / 0.16 mm
  • Rigid PE insulation
  • Braided tinned copper screen 6 x 16 / 0.12 mm
  • Black PVC cable sheath
  • Capacitance conductor / screen less than 8 pF / decimeter
  • Conductor resistance less than 4 mOhm / Decimeter
  • Working temperature: -15 ° C to + 70 ° C
  • Diameter: 4 mm
  • Includes TX8 key, cable cutter and 10 spare screws
Produkt dostępny od Sierpień 2018
Numer artykułu 444375
Jednostka sprzedaży 1 szt.
Colour Black
Connector 1 Jack 6,3mm TS male
Connector 2 Jack 6,3mm TS male angled
198 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Środa, 29.05. and Piątek, 31.05.
1

11 Oceny klientów

4.3 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

8 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Great product! But...
Jay-Æ 13.02.2019
Bought these to get rid of all excess cables on my pedalboard after browsing the net for valuable options. Pack comes with 3m of high-end cable and 10 plugs (which can be configured as straight or angled)
The "manual" is just a small leaflet with some pictures on and a "how-to" . After trying the first one i immediately noticed that this isn't as easy as most people may think. A couple of videos on the net show people assembling a complete pedalboard in high speed, but i have serious doubts that these work right off. It's a very thin line between making a perfect working cable, or ruining it by tightening the screw too much. I tested every cable with a multimeter before putting it in place on the board, and out of the 5 cables I made, I had three that I had to re-cut and shorten 2 cm because by tightening the screw I had accidentally pierced the cable. So be very careful! Don't tighten the screw as much as you'd think is necessary, but hold back a turn or two!
As for the quality : absolutely no complaints there! Right off,I noticed a huge difference in sound with the new rockboard cables. I always used the EBS patch-cables (with the flat heads to win some space on my board) and thought they worked fine, until I put these new ones on. Huge improvement!
Just another little thing to think about : you get 3m of cable and 10 plugs, which gives you the means to make 5 cables of 60 cm length. First off, this is a strange number of cables you can make... Most of the time you'll need a "send" and a "return" for each effect you use, so you'll need an even number of cables. So IMO this is far too much cable or too less plugs. You're not buying (this quite expensive) set this to make 60 cm cables on your pedalboard ? I used al ten plugs and was left with 1.8 m of cable. So it would be nice if they'd for starters added just 2 plugs so you can have 3 sets of send/return pairs.

So to wrap up:
Pro : - Sound quality and high-end state of the cables/plugs
Con : - Sensitive assembly and an uneven number of cables you end up with.
wykończenie
4
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
HH
Geht so leider nicht
Henning Hasselbach 30.09.2020
In der Hoffnung, eine elegante Lösung für sehr unterschiedliche Kabellängen auf meinem Pedalboard zu finden, habe ich dieses Set ausprobiert.
Leider hatte ich beim Zusammensetzen (strikt nach Anweisung) einen Ausschuss von knapp 75% – also Kabel wieder kürzen, Schräubchen wieder rein und erneut per Kabeltester checken.
Es blieb leider dabei: nur jeder vierte Versuch glückte und ich konnte dann ein funktionierendes Kabel in der Hand halten.
Schade – tolle Idee, leider nur in der Theorie.
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
i
absolute Empfehlung
iralda 27.03.2019
Es ist wirklich so einfach, wie beschrieben. Bitte unbedingt beachten, dass die Schrube nicht zu fest angezogen werden darf, dann kann nichts schiefgehen. Konnte nix Negatives finden - Moment, evt. macht ein Meter Kabel mehr noch einen Punkt zusätzlich.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate fr
Wystąpił błąd. Proszę spróbować później.
S
waw
Sassan 28.04.2019
Je kiff la qualité !
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie