j
Sturdy, feels like good quality, assembly oaky
I use mine as a stand for my Prophet Rev2 desktop. It feels robust, even with a quite elongated setting and heavy load. I was pleasantly supripsed by how sturdy it seems, despite the low price.
Assembly was not difficult but took maybe ten minutes, and changing height once monted probably takes about five minutes. Would not recommend for portable use in a stressfull situation
Assembly was not difficult but took maybe ten minutes, and changing height once monted probably takes about five minutes. Would not recommend for portable use in a stressfull situation
1
0
Zgłoś nadużycie
A
Basic laptop stand for an affordable price
The stand comes in white box with no labels, and inside you find quite a few pieces and screws and a very simple instruction sheet. However, the item is quite logically built and in a matter of minutes it can be assembled. When finished, the stand feels solid and it supports my 13" MacBook with no problem. The top pieces are equipped with foamy material, so you don't have to worry about your gear falling off or getting scratched. It keeps your laptop or lighter DJ machinery firmly in place, even though the front stoppers aren't so big.
Two big clamps are provided with the item, so with them the stand can be table mounted. When attached with clamps, the stand feels very rigid. In addition, two flat feet are available for regular tabletop use, but then the stand feels a little bit flimsier when stacking heavier items on it. The height and width can be slightly adjusted unlike the angle of the stand.
This laptop stand is perfect for the price, and has served faultlessly in my home studio. It may not be a stand of choice for touring use, as it isn't fully adjustable and features small parts when dismantled, but for the money, it works like a charm.
Two big clamps are provided with the item, so with them the stand can be table mounted. When attached with clamps, the stand feels very rigid. In addition, two flat feet are available for regular tabletop use, but then the stand feels a little bit flimsier when stacking heavier items on it. The height and width can be slightly adjusted unlike the angle of the stand.
This laptop stand is perfect for the price, and has served faultlessly in my home studio. It may not be a stand of choice for touring use, as it isn't fully adjustable and features small parts when dismantled, but for the money, it works like a charm.
1
0
Zgłoś nadużycie
DW
Produit robuste
Produit robuste au niveau des matériaux, une fois attaché ca ne bouge plus d'un poil!
Je l'utilise pour une petits table de mixage Soundcraft notepad 12fx et un autre pour placer une TD-3.
Un peu compliqué à monter par contre car il faut tenir les petits éléments horizontaux cylindriques entre les deux montants, et enfin visser les deux vis rondes en parallèle pour que ca ne glisse pas.
Très bon produit, je recommande vivement.
Je l'utilise pour une petits table de mixage Soundcraft notepad 12fx et un autre pour placer une TD-3.
Un peu compliqué à monter par contre car il faut tenir les petits éléments horizontaux cylindriques entre les deux montants, et enfin visser les deux vis rondes en parallèle pour que ca ne glisse pas.
Très bon produit, je recommande vivement.
0
0
Zgłoś nadużycie
e
Has it's problems
Assembly was a bit of a struggle, as the machine drilled holes that screw the bridging tubes were out of alignment on each side, which meant the whole stand was unbalanced from the start. I eventually found a set of holes that lined up ok (only ok, not perfect). That aside, I found that it's a bit of a clunky bit of kit to travel with, hard to find a bag that fits it without breaking it down, needs a fitted foam flight case really. And finally the two arms where my laptop sits are super shallow. My 16" Macbook Pro feels like it could easily slip off, particularly when the the arms are perfectly level with each other. It did the job for a while, but I've since moved on to a better setup, so it's just gathering dust.
0
0
Zgłoś nadużycie
K
Rusty bolts and screws
Came with rusty bolts and screws.
Still usable, but this thing must have been a long time in a warehouse or something.
Still usable, but this thing must have been a long time in a warehouse or something.
0
0
Zgłoś nadużycie
HP
Versatile
This stand is very versitile. I bought this model because of the possibility of putting flat feet on it (instead of the clamps), as with these feet other material could be put underneath (it comes with strips of thin anti-scratching material that can be glued so that the equipment underneath does not slip nor gets scratched when put on top of these metal feet).
With the regular stand (same model but without the clamps) the bottom feet are higher at the junction so it gives less space to put material underneath (see pictures in Thomann's website for these two models). I use this, for example, to put a MicroKorg underneath (I also glued some rubber feet on the MicroKorg to be sure it does not scratch the metal feet and is floating above these) and a computer laptop on top, or under my axiom 61 to put an expander module synth on top to play with.
I wished maybe the stand could go a little lower at its the minimum height, and ideally that we could control its angle. But really, at this price, you can't really find a stand that is perfectly functional and versitile as this one, as you can also regulate its height (very useful for DJ gear I guess).
With the regular stand (same model but without the clamps) the bottom feet are higher at the junction so it gives less space to put material underneath (see pictures in Thomann's website for these two models). I use this, for example, to put a MicroKorg underneath (I also glued some rubber feet on the MicroKorg to be sure it does not scratch the metal feet and is floating above these) and a computer laptop on top, or under my axiom 61 to put an expander module synth on top to play with.
I wished maybe the stand could go a little lower at its the minimum height, and ideally that we could control its angle. But really, at this price, you can't really find a stand that is perfectly functional and versitile as this one, as you can also regulate its height (very useful for DJ gear I guess).
0
0
Zgłoś nadużycie
B
it works but it ain't great
i have this on my standing desk for a while now and it does the job but i wouldn't buy it again. one of the screws already twists through (doesn't grip anymore) also it doesn't feel super stable and the lips are JUST big enough tho my macbook slipped over one of them once but didn't fall luckily. i bet there's better options out there
0
0
Zgłoś nadużycie
L
Does the job
Nothing more to say, easy to assemble and it does what it’s supposed to do
0
0
Zgłoś nadużycie
S
Much sturdier than I expected
A really solid purchase overall, I'm currently using it to hold my laptop while working remotely but there are definitely lots of other ways you could use this, to hold keyboards or other instruments.
0
0
Zgłoś nadużycie
a
Functional
Very useful match for Roland TR-8, just note that the clamps extend about 15cm into and 10 cm below whatever surface you attach it to. Mine is warped slightly on one side, but this does not affect performance.
0
0
Zgłoś nadużycie
