Klark Teknik Mic Booster CT1

167

Dynamic Microphone Booster

  • For dynamic or passive ribbon microphones
  • Gain: 25 dB
  • Power supply via phantom power
  • Frequency range: 10 - 20,000 Hz (± 1 dB)
  • Input and output: XLR
  • Dimensions: 24 x 25 x 78 mm
  • Weight: 100 g
Produkt dostępny od Maj 2020
Numer artykułu 474739
Jednostka sprzedaży 1 szt.
Channels 1
Number of microphone inputs 1
Instrument input No
Tubes No
Compressor/Limiter No
Equalizer No
De-Esser No
Phantom power No
Phase Reverse No
External effect loops No
Analogue Outputs XLR
Digitale Outputs 0
Headphone connection No
Level Meter No
Design Adaptor
198 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Czwartek, 2.05.
1

167 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

obsługa

właściwości

dźwięk

wykończenie

130 Opinie

S
Bardzo dobry stosunek jakosci do ceny
Seba.D 16.01.2023
Bardzo dobry stosunek jakosci do ceny
obsługa
właściwości
dźwięk
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
PR
pretty good.
Peter R. 438 18.01.2022
This gives me around 1/4 turn more, on (most of) my pre gain knobs, audio technica mic.
I have listened hard and cannot hear any conceivable sound colouring to my voice/harmonica, but mic'd up guitar/mic booster does sound a little "compressed", a few tweaks on the eq and the guitar sounds great. Passive DI & electric guitar, with this inline are "OK" too, but passive DI's tend to compress a little.
I like to see people at the back talking while I perform, so I don't "blast" the punters, any small variations in my "preferred sound" are not too important. A little Sound colouring doesn't matter at all to most live performer's.
So this mic pre is a great weapon to have in the bag when using "house PA's".
obsługa
właściwości
dźwięk
wykończenie
3
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
G
Protect your ribbon mic and give it a boost!
GuitarOil 03.04.2022
I was living in constant fear of accidentally feeding my ribbon +48v Phantom Power by accident; now I don't. This is a great solution to protect your delicate mics while also reducing the need to add incredible amounts of preamp gain to hear them properly.
obsługa
właściwości
dźwięk
wykończenie
5
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
C
It's cleaR, but not cleaN
CyberDNIWE 06.06.2021
Converting 48v phantom power into "clean" gain is ok, but
compared to Behringer UMC202HD's midas preamps, this thing is noisy. However, the noise seems to be not the typical high pitched whine of preamps, but rather a little bit lower one.

You also need a patch cable to connect it directly to the interface, because the male part has a very thick layer of metal around it and would siply not fit. Respectively, if you're ok with plugging it in the back of the mic, then no extra cables are required.

Conclusion:
If you have a decent enough preamp in your interface you dont need it. If you dont, then you probably will not care about a few extra db of background preamp noise. In the end, it does what it advertises to do, and for the price, it is enough.
obsługa
właściwości
dźwięk
wykończenie
5
3
Zgłoś nadużycie

Zgłoś nadużycie

Youtube na ten temat