JTS MA-123

61

Switchable attenuator for microphones

  • -10 dB, -20 dB and -30 dB switchable
  • Suitable for dynamic microphones and condenser microphones
  • XLR in / out
  • Frequency range: 22 - 20,000 Hz
  • Dimensions: 21 x 113 mm
  • Robust metal housing
Produkt dostępny od Kwiecień 2018
Numer artykułu 436200
Jednostka sprzedaży 1 szt.
105 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Poniedziałek, 29.04.
1

61 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

38 Opinie

m
Works well
mkgt 03.10.2023
It does it's job, passes phantom power to condenser mics, nothing to complain about.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
r
Recommended with Tannoy 5 Gold monitors and Babyface Pro
roccapl 28.11.2020
I had the problem that the output of my RME Babyface Pro (the old model) has a fixed output that drives the Tannoy Gold 5 monitors too hot.
The result of this is that the main output of the sound card had to stay at -40dB, lowering the resolution of the audio and pumping the self noise. In the rme forums ("Level mismatch solutions - fixed and variable attenuators"), they suggested this product and I admit that they work perfectly to attenuate the sound card output so that I can turn my main output back to 0dB.
wykończenie
5
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
AD
The cheapest and gets the job done
Alex Djuran 31.03.2021
I bought a few of these for some loud sources I'm dealing with in my studio such as my subkick, LDC overheads, SDC's on close mic'd drums etc. The sources are very hot, so I needed some pads to not clip my mics in digital and this little thing caught my eye.

It's way cheaper than most of the competition and it's pretty versitile in offering you 3 steps of padding. Overall, great product!
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
T
nothing less nothing more
Toothpaste 01.05.2021
it just does what you expect it to do. i am using two of these sticks between my audio interface and monitors. it adds no coloration whatsoever to the signal. i wonder what more does the more expensive alternatives deliver, probably nothing more than a better looking brand sticker on the product!

recommended.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie